diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/openocd.texi | 15 |
1 files changed, 8 insertions, 7 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi index 57aac0a3..6ce1d285 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -2672,15 +2672,16 @@ usb_blaster_vid_pid 0x16C0 0x06AD @end example @end deffn -@deffn {Command} {usb_blaster} (@option{pin6}|@option{pin8}) (@option{0}|@option{1}) -Sets the state of the unused GPIO pins on USB-Blasters (pins 6 and 8 on the -female JTAG header). These pins can be used as SRST and/or TRST provided the -appropriate connections are made on the target board. +@deffn {Command} {usb_blaster_pin} (@option{pin6}|@option{pin8}) (@option{0}|@option{1}|@option{s}|@option{t}) +Sets the state or function of the unused GPIO pins on USB-Blasters +(pins 6 and 8 on the female JTAG header). These pins can be used as +SRST and/or TRST provided the appropriate connections are made on the +target board. -For example, to use pin 6 as SRST (as with an AVR board): +For example, to use pin 6 as SRST: @example -$_TARGETNAME configure -event reset-assert \ - "usb_blaster pin6 1; wait 1; usb_blaster pin6 0" +usb_blaster_pin pin6 s +reset_config srst_only @end example @end deffn |