diff options
Diffstat (limited to 'doc/openocd.texi')
| -rw-r--r-- | doc/openocd.texi | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi index 3e249c07..ae926970 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -995,7 +995,7 @@ For example, there may be configuration files for your JTAG adapter and target chip, but you need a new board-specific config file giving access to your particular flash chips. Or you might need to write another target chip configuration file -for a new chip built around the Cortex M3 core. +for a new chip built around the Cortex-M3 core. @quotation Note When you write new configuration files, please submit @@ -5215,7 +5215,7 @@ The AVR 8-bit microcontrollers from Atmel integrate flash memory. @deffn {Flash Driver} efm32 All members of the EFM32 microcontroller family from Energy Micro include -internal flash and use ARM Cortex M3 cores. The driver automatically recognizes +internal flash and use ARM Cortex-M3 cores. The driver automatically recognizes a number of these chips using the chip identification register, and autoconfigures itself. @example @@ -5235,7 +5235,7 @@ supported.} @deffn {Flash Driver} fm3 All members of the FM3 microcontroller family from Fujitsu -include internal flash and use ARM Cortex M3 cores. +include internal flash and use ARM Cortex-M3 cores. The @var{fm3} driver uses the @var{target} parameter to select the correct bank config, it can currently be one of the following: @code{mb9bfxx1.cpu}, @code{mb9bfxx2.cpu}, @code{mb9bfxx3.cpu}, @@ -5267,7 +5267,7 @@ nor is Chip Erase (only Sector Erase is implemented).} @deffn {Flash Driver} kinetis @cindex kinetis Kx and KLx members of the Kinetis microcontroller family from Freescale include -internal flash and use ARM Cortex M0+ or M4 cores. The driver automatically +internal flash and use ARM Cortex-M0+ or M4 cores. The driver automatically recognizes flash size and a number of flash banks (1-4) using the chip identification register, and autoconfigures itself. @@ -5325,7 +5325,7 @@ Command disables watchdog timer. @deffn {Flash Driver} kinetis_ke @cindex kinetis_ke KE members of the Kinetis microcontroller family from Freescale include -internal flash and use ARM Cortex M0+. The driver automatically recognizes +internal flash and use ARM Cortex-M0+. The driver automatically recognizes the KE family and sub-family using the chip identification register, and autoconfigures itself. @@ -5686,7 +5686,7 @@ This will remove any Code Protection. @deffn {Flash Driver} psoc4 All members of the PSoC 41xx/42xx microcontroller family from Cypress -include internal flash and use ARM Cortex M0 cores. +include internal flash and use ARM Cortex-M0 cores. The driver automatically recognizes a number of these chips using the chip identification register, and autoconfigures itself. @@ -5720,7 +5720,7 @@ The @var{num} parameter is a value shown by @command{flash banks}. @deffn {Flash Driver} sim3x All members of the SiM3 microcontroller family from Silicon Laboratories -include internal flash and use ARM Cortex M3 cores. It supports both JTAG +include internal flash and use ARM Cortex-M3 cores. It supports both JTAG and SWD interface. The @var{sim3x} driver tries to probe the device to auto detect the MCU. If this failes, it will use the @var{size} parameter as the size of flash bank. |