diff options
| -rw-r--r-- | tcl/board/frdm-kl46z.cfg | 13 | ||||
| -rw-r--r-- | tcl/target/kl46.cfg | 48 |
2 files changed, 61 insertions, 0 deletions
diff --git a/tcl/board/frdm-kl46z.cfg b/tcl/board/frdm-kl46z.cfg new file mode 100644 index 00000000..16ffa8d6 --- /dev/null +++ b/tcl/board/frdm-kl46z.cfg @@ -0,0 +1,13 @@ +# This is an Freescale Freedom eval board with a single MKL46Z256VLL4 chip. +# http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=FRDM-KL46Z +# + +source [find interface/cmsis-dap.cfg] + +# increase working area to 16KB +set WORKAREASIZE 0x4000 + +# chip name +set CHIPNAME MKL46Z256VLL4 + +source [find target/kl46.cfg] diff --git a/tcl/target/kl46.cfg b/tcl/target/kl46.cfg new file mode 100644 index 00000000..156ae9f2 --- /dev/null +++ b/tcl/target/kl46.cfg @@ -0,0 +1,48 @@ +# +# Freescale Kinetis KL46 devices +# + +# +# KL46 devices supports SWD transport only. +# +source [find target/swj-dp.tcl] + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME kl46 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +# Work-area is a space in RAM used for flash programming +# By default use 4kB +if { [info exists WORKAREASIZE] } { + set _WORKAREASIZE $WORKAREASIZE +} else { + set _WORKAREASIZE 0x1000 +} + +if { [info exists CPUTAPID] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x0bc11477 +} + +swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID + +set _TARGETNAME $_CHIPNAME.cpu +target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_CHIPNAME.cpu + +$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 + +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME kinetis 0 0 0 0 $_TARGETNAME + +# if srst is not fitted use SYSRESETREQ to +# perform a soft reset +cortex_m reset_config sysresetreq |