diff options
-rw-r--r-- | src/flash/nor/Makefile.am | 1 | ||||
-rw-r--r-- | src/flash/nor/at91sam4l.c | 668 | ||||
-rw-r--r-- | src/flash/nor/drivers.c | 2 | ||||
-rw-r--r-- | tcl/target/at91sam4lXX.cfg | 4 |
4 files changed, 674 insertions, 1 deletions
diff --git a/src/flash/nor/Makefile.am b/src/flash/nor/Makefile.am index 1082b22c..48e6ab22 100644 --- a/src/flash/nor/Makefile.am +++ b/src/flash/nor/Makefile.am @@ -10,6 +10,7 @@ libocdflashnor_la_SOURCES = \ NOR_DRIVERS = \ aduc702x.c \ at91sam4.c \ + at91sam4l.c \ at91sam3.c \ at91sam7.c \ avrf.c \ diff --git a/src/flash/nor/at91sam4l.c b/src/flash/nor/at91sam4l.c new file mode 100644 index 00000000..bb841852 --- /dev/null +++ b/src/flash/nor/at91sam4l.c @@ -0,0 +1,668 @@ +/*************************************************************************** + * Copyright (C) 2013 by Andrey Yurovsky * + * Andrey Yurovsky <yurovsky@gmail.com> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. * + ***************************************************************************/ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "imp.h" + +/* At this time, the SAM4L Flash is available in these capacities: + * ATSAM4Lx4xx: 256KB (512 pages) + * ATSAM4Lx2xx: 128KB (256 pages) + * ATSAM4Lx8xx: 512KB (1024 pages) + */ + +/* There are 16 lockable regions regardless of overall capacity. The number + * of pages per sector is therefore dependant on capacity. */ +#define SAM4L_NUM_SECTORS 16 + +/* Locations in memory map */ +#define SAM4L_FLASH 0x00000000 /* Flash region */ +#define SAM4L_FLASH_USER 0x00800000 /* Flash user page region */ +#define SAM4L_FLASHCALW 0x400A0000 /* Flash controller */ +#define SAM4L_CHIPID 0x400E0740 /* Chip Identification */ + +/* Offsets from SAM4L_FLASHCALW */ +#define SAM4L_FCR 0x00 /* Flash Control Register (RW) */ +#define SAM4L_FCMD 0x04 /* Flash Command Register (RW) */ +#define SAM4L_FSR 0x08 /* Flash Status Register (RO) */ +#define SAM4L_FPR 0x0C /* Flash Parameter Register (RO) */ +#define SAM4L_FVR 0x10 /* Flash Version Register (RO) */ +#define SAM4L_FGPFRHI 0x14 /* Flash General Purpose Register High (RO) */ +#define SAM4L_FGPFRLO 0x18 /* Flash General Purpose Register Low (RO) */ + +/* Offsets from SAM4L_CHIPID */ +#define SAM4L_CIDR 0x00 /* Chip ID Register (RO) */ +#define SAM4L_EXID 0x04 /* Chip ID Extension Register (RO) */ + +/* Flash commands (for SAM4L_FCMD), see Table 14-5 */ +#define SAM4L_FCMD_NOP 0 /* No Operation */ +#define SAM4L_FCMD_WP 1 /* Write Page */ +#define SAM4L_FCMD_EP 2 /* Erase Page */ +#define SAM4L_FCMD_CPB 3 /* Clear Page Buffer */ +#define SAM4L_FCMD_LP 4 /* Lock region containing given page */ +#define SAM4L_FCMD_UP 5 /* Unlock region containing given page */ +#define SAM4L_FCMD_EA 6 /* Erase All */ +#define SAM4L_FCMD_WGPB 7 /* Write general-purpose fuse bit */ +#define SAM4L_FCMD_EGPB 8 /* Erase general-purpose fuse bit */ +#define SAM4L_FCMD_SSB 9 /* Set security fuses */ +#define SAM4L_FCMD_PGPFB 10 /* Program general-purpose fuse byte */ +#define SAM4L_FCMD_EAGPF 11 /* Erase all general-purpose fuse bits */ +#define SAM4L_FCMD_QPR 12 /* Quick page read */ +#define SAM4L_FCMD_WUP 13 /* Write user page */ +#define SAM4L_FCMD_EUP 14 /* Erase user page */ +#define SAM4L_FCMD_QPRUP 15 /* Quick page read (user page) */ +#define SAM4L_FCMD_HSEN 16 /* High speed mode enable */ +#define SAM4L_FCMD_HSDIS 17 /* High speed mode disable */ + +#define SAM4L_FMCD_CMDKEY 0xA5UL /* 'key' to issue commands, see 14.10.2 */ + +struct sam4l_chip_info { + uint32_t id; + uint32_t exid; + const char *name; +}; + +/* These are taken from Table 9-1 in 42023E-SAM-07/2013 */ +static struct sam4l_chip_info sam4l_known_chips[] = { + { 0xAB0B0AE0, 0x1400000F, "ATSAM4LC8C" }, + { 0xAB0A09E0, 0x0400000F, "ATSAM4LC4C" }, + { 0xAB0A07E0, 0x0400000F, "ATSAM4LC2C" }, + { 0xAB0B0AE0, 0x1300000F, "ATSAM4LC8B" }, + { 0xAB0A09E0, 0x0300000F, "ATSAM4LC4B" }, + { 0xAB0A07E0, 0x0300000F, "ATSAM4LC2B" }, + { 0xAB0B0AE0, 0x1200000F, "ATSAM4LC8A" }, + { 0xAB0A09E0, 0x0200000F, "ATSAM4LC4A" }, + { 0xAB0A07E0, 0x0200000F, "ATSAM4LC2A" }, + { 0xAB0B0AE0, 0x14000002, "ATSAM4LS8C" }, + { 0xAB0A09E0, 0x04000002, "ATSAM4LS4C" }, + { 0xAB0A07E0, 0x04000002, "ATSAM4LS2C" }, + { 0xAB0B0AE0, 0x13000002, "ATSAM4LS8B" }, + { 0xAB0A09E0, 0x03000002, "ATSAM4LS4B" }, + { 0xAB0A07E0, 0x03000002, "ATSAM4LS2B" }, + { 0xAB0B0AE0, 0x12000002, "ATSAM4LS8A" }, + { 0xAB0A09E0, 0x02000002, "ATSAM4LS4A" }, + { 0xAB0A07E0, 0x02000002, "ATSAM4LS2A" }, +}; + +/* Meaning of SRAMSIZ field in CHIPID, see 9.3.1 in 42023E-SAM-07/2013 */ +static uint16_t sam4l_ram_sizes[16] = { 48, 1, 2, 6, 24, 4, 80, 160, 8, 16, 32, 64, 128, 256, 96, 512 }; + +/* Meaning of PSZ field in FPR, see 14.10.4 in 42023E-SAM-07/2013 */ +static const uint16_t sam4l_page_sizes[8] = { 32, 64, 128, 256, 512, 1024, 2048, 4096 }; + +struct sam4l_info { + struct sam4l_chip_info *details; + + uint32_t flash_kb; + uint32_t ram_kb; + uint32_t page_size; + int num_pages; + int sector_size; + int pages_per_sector; + + bool probed; + struct target *target; + struct sam4l_info *next; +}; + +static struct sam4l_info *sam4l_chips; + +static int sam4l_flash_wait_until_ready(struct target *target) +{ + volatile unsigned int t = 0; + uint32_t st; + int res; + + /* Poll the status register until the FRDY bit is set */ + do { + res = target_read_u32(target, SAM4L_FLASHCALW + SAM4L_FSR, &st); + } while (res == ERROR_OK && !(st & (1<<0)) && ++t < 10); + + return res; +} + +static int sam4l_flash_check_error(struct target *target, uint32_t *err) +{ + uint32_t st; + int res; + + res = target_read_u32(target, SAM4L_FLASHCALW + SAM4L_FSR, &st); + + if (res == ERROR_OK) + *err = st & ((1<<3) | (1<<2)); /* grab PROGE and LOCKE bits */ + + return res; +} + +static int sam4l_flash_command(struct target *target, uint8_t cmd, int page) +{ + int res; + uint32_t fcmd; + uint32_t err; + + res = sam4l_flash_wait_until_ready(target); + if (res != ERROR_OK) + return res; + + if (page >= 0) { + /* Set the page number. For some commands, the page number is just an + * argument (ex: fuse bit number). */ + fcmd = (SAM4L_FMCD_CMDKEY << 24) | ((page & 0xFFFF) << 8) | (cmd & 0x3F); + } else { + /* Reuse the page number that was read from the flash command register. */ + res = target_read_u32(target, SAM4L_FLASHCALW + SAM4L_FCMD, &fcmd); + if (res != ERROR_OK) + return res; + + fcmd &= ~0x3F; /* clear out the command code */ + fcmd |= (SAM4L_FMCD_CMDKEY << 24) | (cmd & 0x3F); + } + + /* Send the command */ + res = target_write_u32(target, SAM4L_FLASHCALW + SAM4L_FCMD, fcmd); + if (res != ERROR_OK) + return res; + + res = sam4l_flash_check_error(target, &err); + if (res != ERROR_OK) + return res; + + if (err != 0) + LOG_ERROR("%s got error status 0x%08" PRIx32, __func__, err); + + res = sam4l_flash_wait_until_ready(target); + + return res; +} + +FLASH_BANK_COMMAND_HANDLER(sam4l_flash_bank_command) +{ + struct sam4l_info *chip = sam4l_chips; + + while (chip) { + if (chip->target == bank->target) + break; + chip = chip->next; + } + + if (!chip) { + /* Create a new chip */ + chip = calloc(1, sizeof(*chip)); + if (!chip) + return ERROR_FAIL; + + chip->target = bank->target; + chip->probed = false; + + bank->driver_priv = chip; + + /* Insert it into the chips list (at head) */ + chip->next = sam4l_chips; + sam4l_chips = chip; + } + + if (bank->base != SAM4L_FLASH) { + LOG_ERROR("Address 0x%08" PRIx32 " invalid bank address (try 0x%08" PRIx32 + "[at91sam4l series] )", + bank->base, SAM4L_FLASH); + return ERROR_FAIL; + } + + return ERROR_OK; +} + +static struct sam4l_chip_info *sam4l_find_chip_name(uint32_t id, uint32_t exid) +{ + unsigned int i; + + id &= ~0xF; + + for (i = 0; i < ARRAY_SIZE(sam4l_known_chips); i++) { + if (sam4l_known_chips[i].id == id && sam4l_known_chips[i].exid == exid) + return &sam4l_known_chips[i]; + } + + return NULL; +} + +static int sam4l_check_page_erased(struct flash_bank *bank, uint32_t pn, + bool *is_erased_p) +{ + int res; + uint32_t st; + + /* Issue a quick page read to verify that we've erased this page */ + res = sam4l_flash_command(bank->target, SAM4L_FCMD_QPR, pn); + if (res != ERROR_OK) { + LOG_ERROR("Quick page read %d failed", pn); + return res; + } + + /* Retrieve the flash status */ + res = target_read_u32(bank->target, SAM4L_FLASHCALW + SAM4L_FSR, &st); + if (res != ERROR_OK) { + LOG_ERROR("Couldn't read erase status"); + return res; + } + + /* Is the page in question really erased? */ + *is_erased_p = !!(st & (1<<5)); + + return ERROR_OK; +} + +static int sam4l_probe(struct flash_bank *bank) +{ + uint32_t id, exid, param; + int res; + struct sam4l_info *chip = (struct sam4l_info *)bank->driver_priv; + + if (chip->probed) + return ERROR_OK; + + res = target_read_u32(bank->target, SAM4L_CHIPID + SAM4L_CIDR, &id); + if (res != ERROR_OK) { + LOG_ERROR("Couldn't read chip ID"); + return res; + } + + res = target_read_u32(bank->target, SAM4L_CHIPID + SAM4L_EXID, &exid); + if (res != ERROR_OK) { + LOG_ERROR("Couldn't read extended chip ID"); + return res; + } + + chip->details = sam4l_find_chip_name(id, exid); + + /* The RAM capacity is in a lookup table. */ + chip->ram_kb = sam4l_ram_sizes[0xF & (id >> 16)]; + + switch (0xF & (id >> 8)) { + case 0x07: + chip->flash_kb = 128; + break; + case 0x09: + chip->flash_kb = 256; + break; + case 0x0A: + chip->flash_kb = 512; + break; + default: + LOG_ERROR("Unknown flash size (chip ID is %08X), assuming 128K", id); + chip->flash_kb = 128; + break; + } + + /* Retrieve the Flash parameters */ + res = target_read_u32(bank->target, SAM4L_FLASHCALW + SAM4L_FPR, ¶m); + if (res != ERROR_OK) { + LOG_ERROR("Couldn't read Flash parameters"); + return res; + } + + /* Fetch the page size from the parameter register. Technically the flash + * capacity is there too though the manual mentions that not all parts will + * have it set so we use the Chip ID capacity information instead. */ + chip->page_size = sam4l_page_sizes[0x7 & (param >> 8)]; + assert(chip->page_size); + chip->num_pages = chip->flash_kb * 1024 / chip->page_size; + + chip->sector_size = (chip->flash_kb * 1024) / SAM4L_NUM_SECTORS; + chip->pages_per_sector = chip->sector_size / chip->page_size; + + /* Make sure the bank size is correct */ + bank->size = chip->flash_kb * 1024; + + /* Allocate the sector table. */ + bank->num_sectors = SAM4L_NUM_SECTORS; + bank->sectors = calloc(bank->num_sectors, (sizeof((bank->sectors)[0]))); + if (!bank->sectors) + return ERROR_FAIL; + + /* Fill out the sector information: all SAM4L sectors are the same size and + * there is always a fixed number of them. */ + for (int i = 0; i < bank->num_sectors; i++) { + bank->sectors[i].size = chip->sector_size; + bank->sectors[i].offset = i * chip->sector_size; + /* mark as unknown */ + bank->sectors[i].is_erased = -1; + bank->sectors[i].is_protected = -1; + } + + /* Done */ + chip->probed = true; + + LOG_INFO("SAM4L MCU: %s (Rev %c) (%uKB Flash with %d %dB pages, %uKB RAM)", + chip->details ? chip->details->name : "unknown", 'A' + (id & 0xF), + chip->flash_kb, chip->num_pages, chip->page_size, chip->ram_kb); + + return ERROR_OK; +} + +static int sam4l_protect_check(struct flash_bank *bank) +{ + int res; + uint32_t st; + struct sam4l_info *chip = (struct sam4l_info *)bank->driver_priv; + + if (bank->target->state != TARGET_HALTED) { + LOG_ERROR("Target not halted"); + + return ERROR_TARGET_NOT_HALTED; + } + + if (!chip->probed) { + if (sam4l_probe(bank) != ERROR_OK) + return ERROR_FLASH_BANK_NOT_PROBED; + } + + res = target_read_u32(bank->target, SAM4L_FLASHCALW + SAM4L_FSR, &st); + if (res != ERROR_OK) + return res; + + st >>= 16; /* There are 16 lock region bits in the upper half word */ + for (int i = 0; i < bank->num_sectors; i++) + bank->sectors[i].is_protected = !!(st & (1<<i)); + + return ERROR_OK; +} + +static int sam4l_protect(struct flash_bank *bank, int set, int first, int last) +{ + struct sam4l_info *chip = sam4l_chips; + + if (bank->target->state != TARGET_HALTED) { + LOG_ERROR("Target not halted"); + + return ERROR_TARGET_NOT_HALTED; + } + + if (!chip->probed) { + if (sam4l_probe(bank) != ERROR_OK) + return ERROR_FLASH_BANK_NOT_PROBED; + } + + /* Make sure the pages make sense. */ + if (first >= bank->num_sectors || last >= bank->num_sectors) { + LOG_ERROR("Protect range %d - %d not valid (%d sectors total)", first, last, + bank->num_sectors); + return ERROR_FAIL; + } + + /* Try to lock or unlock each sector in the range. This is done by locking + * a region containing one page in that sector, we arbitrarily choose the 0th + * page in the sector. */ + for (int i = first; i <= last; i++) { + int res; + + res = sam4l_flash_command(bank->target, + set ? SAM4L_FCMD_LP : SAM4L_FCMD_UP, i * chip->pages_per_sector); + if (res != ERROR_OK) { + LOG_ERROR("Can't %slock region containing page %d", set ? "" : "un", i); + return res; + } + } + + return ERROR_OK; +} + +static int sam4l_erase(struct flash_bank *bank, int first, int last) +{ + int ret; + struct sam4l_info *chip = (struct sam4l_info *)bank->driver_priv; + + if (bank->target->state != TARGET_HALTED) { + LOG_ERROR("Target not halted"); + + return ERROR_TARGET_NOT_HALTED; + } + + if (!chip->probed) { + if (sam4l_probe(bank) != ERROR_OK) + return ERROR_FLASH_BANK_NOT_PROBED; + } + + /* Make sure the pages make sense. */ + if (first >= bank->num_sectors || last >= bank->num_sectors) { + LOG_ERROR("Erase range %d - %d not valid (%d sectors total)", first, last, + bank->num_sectors); + return ERROR_FAIL; + } + + /* Erase */ + if ((first == 0) && ((last + 1) == bank->num_sectors)) { + LOG_DEBUG("Erasing the whole chip"); + + ret = sam4l_flash_command(bank->target, SAM4L_FCMD_EA, -1); + if (ret != ERROR_OK) { + LOG_ERROR("Erase All failed"); + return ret; + } + } else { + LOG_DEBUG("Erasing sectors %d through %d...\n", first, last); + + /* For each sector... */ + for (int i = first; i <= last; i++) { + /* For each page in that sector... */ + for (int j = 0; j < chip->pages_per_sector; j++) { + int pn = i * chip->pages_per_sector + j; + bool is_erased = false; + + /* Issue the page erase */ + ret = sam4l_flash_command(bank->target, SAM4L_FCMD_EP, pn); + if (ret != ERROR_OK) { + LOG_ERROR("Erasing page %d failed", pn); + return ret; + } + + ret = sam4l_check_page_erased(bank, pn, &is_erased); + if (ret != ERROR_OK) + return ret; + + if (!is_erased) { + LOG_DEBUG("Page %d was not erased.", pn); + return ERROR_FAIL; + } + } + + /* This sector is definitely erased. */ + bank->sectors[i].is_erased = 1; + } + } + + return ERROR_OK; +} + +/* Write an entire page from host buffer 'buf' to page-aligned 'address' in the + * Flash. */ +static int sam4l_write_page(struct sam4l_info *chip, struct target *target, + uint32_t address, uint8_t *buf) +{ + int res; + + /* Clear the page buffer before we write to it */ + res = sam4l_flash_command(target, SAM4L_FCMD_CPB, -1); + if (res != ERROR_OK) { + LOG_ERROR("%s: can't clear page buffer", __func__); + return res; + } + + /* Write the modified page back to the target's page buffer */ + res = target_write_memory(target, address, 4, chip->page_size / 4, buf); + + if (res != ERROR_OK) { + LOG_ERROR("%s: %d", __func__, __LINE__); + return res; + } + + /* Commit the page contents to Flash: erase the current page and then + * write it out. */ + res = sam4l_flash_command(target, SAM4L_FCMD_EP, -1); + if (res != ERROR_OK) + return res; + res = sam4l_flash_command(target, SAM4L_FCMD_WP, -1); + + return res; +} + +/* Write partial contents into page-aligned 'address' on the Flash from host + * buffer 'buf' by writing 'nb' of 'buf' at 'offset' into the Flash page. */ +static int sam4l_write_page_partial(struct sam4l_info *chip, + struct flash_bank *bank, uint32_t address, uint8_t *buf, + uint32_t page_offset, uint32_t nb) +{ + int res; + uint8_t *pg = malloc(chip->page_size); + if (!pg) + return ERROR_FAIL; + + assert(page_offset + nb < chip->page_size); + assert((address % chip->page_size) == 0); + + /* Retrieve the full page contents from Flash */ + res = target_read_memory(bank->target, address, 4, + chip->page_size / 4, pg); + if (res != ERROR_OK) { + free(pg); + return res; + } + + /* Insert our partial page over the data from Flash */ + memcpy(pg + (page_offset % chip->page_size), buf, nb); + + /* Write the page back out */ + res = sam4l_write_page(chip, bank->target, address, pg); + free(pg); + + return res; +} + +static int sam4l_write(struct flash_bank *bank, uint8_t *buffer, + uint32_t offset, uint32_t count) +{ + int res; + uint32_t nb = 0; + struct sam4l_info *chip = (struct sam4l_info *)bank->driver_priv; + + if (bank->target->state != TARGET_HALTED) { + LOG_ERROR("Target not halted"); + + return ERROR_TARGET_NOT_HALTED; + } + + if (!chip->probed) { + if (sam4l_probe(bank) != ERROR_OK) + return ERROR_FLASH_BANK_NOT_PROBED; + } + + if (offset % chip->page_size) { + /* We're starting at an unaligned offset so we'll write a partial page + * comprising that offset and up to the end of that page. */ + nb = chip->page_size - (offset % chip->page_size); + if (nb > count) + nb = count; + } else if (count < chip->page_size) { + /* We're writing an aligned but partial page. */ + nb = count; + } + + if (nb > 0) { + res = sam4l_write_page_partial(chip, bank, + (offset / chip->page_size) * chip->page_size + bank->base, + buffer, + offset % chip->page_size, nb); + if (res != ERROR_OK) + return res; + + /* We're done with the page contents */ + count -= nb; + offset += nb; + } + + /* There's at least one aligned page to write out. */ + if (count >= chip->page_size) { + int np = count / chip->page_size + ((count % chip->page_size) ? 1 : 0); + + for (int i = 0; i < np; i++) { + if (count >= chip->page_size) { + res = sam4l_write_page(chip, bank->target, + bank->base + (i * chip->page_size), + buffer + (i * chip->page_size)); + /* Advance one page */ + offset += chip->page_size; + count -= chip->page_size; + } else { + res = sam4l_write_page_partial(chip, bank, + bank->base + (i * chip->page_size), + buffer + (i * chip->page_size), 0, count); + /* We're done after this. */ + offset += count; + count = 0; + } + + if (res != ERROR_OK) + return res; + } + } + + return ERROR_OK; +} + +COMMAND_HANDLER(sam4l_handle_info_command) +{ + return ERROR_OK; +} + +static const struct command_registration at91sam4l_exec_command_handlers[] = { + { + .name = "info", + .handler = sam4l_handle_info_command, + .mode = COMMAND_EXEC, + .help = "Print information about the current at91sam4l chip" + "and its flash configuration.", + }, + COMMAND_REGISTRATION_DONE +}; +static const struct command_registration at91sam4l_command_handlers[] = { + { + .name = "at91sam4l", + .mode = COMMAND_ANY, + .help = "at91sam4l flash command group", + .usage = "", + .chain = at91sam4l_exec_command_handlers, + }, + COMMAND_REGISTRATION_DONE +}; + +struct flash_driver at91sam4l_flash = { + .name = "at91sam4l", + .commands = at91sam4l_command_handlers, + .flash_bank_command = sam4l_flash_bank_command, + .erase = sam4l_erase, + .protect = sam4l_protect, + .write = sam4l_write, + .read = default_flash_read, + .probe = sam4l_probe, + .auto_probe = sam4l_probe, + .erase_check = default_flash_blank_check, + .protect_check = sam4l_protect_check, +}; diff --git a/src/flash/nor/drivers.c b/src/flash/nor/drivers.c index aee7c562..b85ff13a 100644 --- a/src/flash/nor/drivers.c +++ b/src/flash/nor/drivers.c @@ -29,6 +29,7 @@ extern struct flash_driver lpcspifi_flash; extern struct flash_driver cfi_flash; extern struct flash_driver at91sam3_flash; extern struct flash_driver at91sam4_flash; +extern struct flash_driver at91sam4l_flash; extern struct flash_driver at91sam7_flash; extern struct flash_driver str7x_flash; extern struct flash_driver str9x_flash; @@ -67,6 +68,7 @@ static struct flash_driver *flash_drivers[] = { &at91sam7_flash, &at91sam3_flash, &at91sam4_flash, + &at91sam4l_flash, &str7x_flash, &str9x_flash, &aduc702x_flash, diff --git a/tcl/target/at91sam4lXX.cfg b/tcl/target/at91sam4lXX.cfg index 67759bc6..590d78f3 100644 --- a/tcl/target/at91sam4lXX.cfg +++ b/tcl/target/at91sam4lXX.cfg @@ -3,4 +3,6 @@ source [find target/at91sam4XXX.cfg] -# no flash defined yet +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME at91sam4l 0x00000000 0 1 1 $_TARGETNAME + |