diff options
| -rw-r--r-- | contrib/99-openocd.rules | 3 | ||||
| -rw-r--r-- | tcl/board/ti-cc3200-launchxl.cfg | 18 | ||||
| -rw-r--r-- | tcl/interface/ftdi/ti-icdi.cfg | 15 | ||||
| -rwxr-xr-x | tcl/target/cc32xx.cfg | 53 |
4 files changed, 89 insertions, 0 deletions
diff --git a/contrib/99-openocd.rules b/contrib/99-openocd.rules index acdfade2..d810fcaf 100644 --- a/contrib/99-openocd.rules +++ b/contrib/99-openocd.rules @@ -50,6 +50,9 @@ ATTRS{idVendor}=="0403", ATTRS{idProduct}=="c141", MODE="664", GROUP="plugdev" # Amontec JTAGkey and JTAGkey-tiny ATTRS{idVendor}=="0403", ATTRS{idProduct}=="cff8", MODE="664", GROUP="plugdev" +# TI ICDI +ATTRS{idVendor}=="0451", ATTRS{idProduct}=="c32a", MODE="664", GROUP="plugdev" + # STLink v1 ATTRS{idVendor}=="0483", ATTRS{idProduct}=="3744", MODE="664", GROUP="plugdev" diff --git a/tcl/board/ti-cc3200-launchxl.cfg b/tcl/board/ti-cc3200-launchxl.cfg new file mode 100644 index 00000000..fd80c531 --- /dev/null +++ b/tcl/board/ti-cc3200-launchxl.cfg @@ -0,0 +1,18 @@ +# +# TI SimpleLink Wi-Fi CC3200 LaunchPad +# +# http://www.ti.com/tool/cc3200-launchxl +# + +source [find interface/ftdi/ti-icdi.cfg] + +if { [info exists TRANSPORT] } { + transport select $TRANSPORT +} else { + transport select jtag +} + +set WORKAREASIZE 0x40000 +source [find target/cc32xx.cfg] + +reset_config srst_only diff --git a/tcl/interface/ftdi/ti-icdi.cfg b/tcl/interface/ftdi/ti-icdi.cfg new file mode 100644 index 00000000..6af809cd --- /dev/null +++ b/tcl/interface/ftdi/ti-icdi.cfg @@ -0,0 +1,15 @@ +# +# This is an FTDI-based debugging solution as found on some TI boards, +# e.g. CC3200 LaunchPad. +# +# The schematics are identical to luminary-icdi (including SWD +# support) but the USB IDs are different. +# + +interface ftdi +ftdi_vid_pid 0x0451 0xc32a + +ftdi_layout_init 0x00a8 0x00eb +ftdi_layout_signal nSRST -noe 0x0020 +ftdi_layout_signal SWD_EN -ndata 0x0080 +ftdi_layout_signal SWDIO_OE -data 0x0008 diff --git a/tcl/target/cc32xx.cfg b/tcl/target/cc32xx.cfg new file mode 100755 index 00000000..ff654502 --- /dev/null +++ b/tcl/target/cc32xx.cfg @@ -0,0 +1,53 @@ +# Config for Texas Instruments SoC CC32xx family + +source [find target/swj-dp.tcl] + +adapter_khz 100 + +source [find target/icepick.cfg] + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME cc32xx +} + +# +# Main DAP +# +if { [info exists DAP_TAPID] } { + set _DAP_TAPID $DAP_TAPID +} else { + if {[using_jtag]} { + set _DAP_TAPID 0x4BA00477 + } else { + set _DAP_TAPID 0x2BA01477 + } +} + +if {[using_jtag]} { + jtag newtap $_CHIPNAME dap -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_DAP_TAPID -disable + jtag configure $_CHIPNAME.dap -event tap-enable "icepick_c_tapenable $_CHIPNAME.jrc 0" +} else { + swj_newdap $_CHIPNAME dap -expected-id $_DAP_TAPID +} + +# +# ICEpick-C (JTAG route controller) +# +if { [info exists JRC_TAPID] } { + set _JRC_TAPID $JRC_TAPID +} else { + set _JRC_TAPID 0x0B97C02F +} + +if {[using_jtag]} { + jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f -expected-id $_JRC_TAPID -ignore-version + jtag configure $_CHIPNAME.jrc -event setup "jtag tapenable $_CHIPNAME.dap" +} + +# +# Cortex M3 target +# +set _TARGETNAME $_CHIPNAME.cpu +target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.dap |