diff options
author | Paul Fertser <fercerpav@gmail.com> | 2014-04-23 12:22:39 +0400 |
---|---|---|
committer | Andreas Fritiofson <andreas.fritiofson@gmail.com> | 2014-06-01 18:31:42 +0000 |
commit | c8c10f77dcbc6297f475af7e9768593a847665c2 (patch) | |
tree | d986f4de3f2da73c17abc490c888427e41eb93ca /tcl | |
parent | 76a765adbc8d6e20ed8adcd4839132017304e7d6 (diff) |
tcl/target/kl25.cfg: add maximum speed specification
Maximum frequency wasn't tested on hardware but the docs seem to be
quite explicit and do not mention any restrictions for that.
Change-Id: Idcf58df5358d06525e683f07c76eedad8f0b292d
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2120
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Diffstat (limited to 'tcl')
-rw-r--r-- | tcl/target/kl25.cfg | 11 |
1 files changed, 11 insertions, 0 deletions
diff --git a/tcl/target/kl25.cfg b/tcl/target/kl25.cfg index 2ed6b0f1..c2126c2c 100644 --- a/tcl/target/kl25.cfg +++ b/tcl/target/kl25.cfg @@ -51,6 +51,17 @@ $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME kinetis 0 0 0 0 $_TARGETNAME +# Table 5-1. Clock Summary of KL25 Sub-Family Reference Manual +# specifies up to 1MHz for VLPR mode. +adapter_khz 1000 + # if srst is not fitted use SYSRESETREQ to # perform a soft reset cortex_m reset_config sysresetreq + +$_TARGETNAME configure -event reset-init { + # Table 5-1. Clock Summary of KL25 Sub-Family Reference Manual + # specifies up to 24MHz for run mode; Table 17 of Sub-Family Data + # Sheet rev4 lists 25MHz as the maximum frequency. + adapter_khz 24000 +} |