diff options
| author | Andreas Fritiofson <andreas.fritiofson@gmail.com> | 2016-02-15 23:17:24 +0100 |
|---|---|---|
| committer | Andreas Fritiofson <andreas.fritiofson@gmail.com> | 2016-11-06 09:47:12 +0000 |
| commit | bcaf775fc10d88d2c63c06bafada141895318b34 (patch) | |
| tree | 043dfe21d9dc1d5fefac0e98341d0fa8e7cd4084 /tcl | |
| parent | cc2d4f015f72d7c30d613b50572eb9f31fac515a (diff) | |
Remove support for the GPL incompatible FTDI D2XX library
Convert Presto, OpenJTAG and USB-Blaster (I) adapter drivers to libftdi
only.
Change-Id: Ib28887620a3dcbb754b9dbf87b9731acca3ac600
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/3237
Tested-by: jenkins
Reviewed-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Diffstat (limited to 'tcl')
| -rw-r--r-- | tcl/board/telo.cfg | 3 | ||||
| -rw-r--r-- | tcl/interface/usb-jtag.cfg | 4 |
2 files changed, 2 insertions, 5 deletions
diff --git a/tcl/board/telo.cfg b/tcl/board/telo.cfg index 126f388f..1d3afdf0 100644 --- a/tcl/board/telo.cfg +++ b/tcl/board/telo.cfg @@ -8,9 +8,6 @@ source [find target/c100helper.tcl] # Telo board & C100 support trst and srst -# Note that libftd2xx.so tries to assert srst -# which break this script -# use libftdi.so library instead with this script # make the reset asserted to # allow RC circuit to discharge for: [ms] adapter_nsrst_assert_width 100 diff --git a/tcl/interface/usb-jtag.cfg b/tcl/interface/usb-jtag.cfg index 15274d52..cb4d29bb 100644 --- a/tcl/interface/usb-jtag.cfg +++ b/tcl/interface/usb-jtag.cfg @@ -27,11 +27,11 @@ # # TODO: Refactor the usb_blaster driver to allow loading firmware using any low # level driver. Loading firmware is currently only supported on the ublast2 -# driver but ixo-usb-jtag requires the ftdi or ftd2xx driver. +# driver but ixo-usb-jtag requires the ftdi driver. interface usb_blaster usb_blaster_vid_pid 0x16C0 0x06AD usb_blaster_device_desc "Van Ooijen Technische Informatica" # ixo-usb-jtag is only compatible with the ublast1 protocol implemented via the -# ftdi or ftd2xx modes, using ublast2 will cause openocd to hang. +# ftdi modes, using ublast2 will cause openocd to hang. usb_blaster_lowlevel_driver ftdi |