diff options
| author | Matthias Welwarsky <matthias@welwarsky.de> | 2016-01-07 13:06:37 +0100 |
|---|---|---|
| committer | Paul Fertser <fercerpav@gmail.com> | 2016-01-22 13:03:39 +0000 |
| commit | c520fdf902d0364681f358cd04f932f2a112cd78 (patch) | |
| tree | 0346b1371013bcb3a034a6b51a2cec2ae1cf2220 /tcl | |
| parent | ac8471f89d7bcc9090a6aba793ea054489c2f139 (diff) | |
am437x: always use highest possible JTAG clock.
With DAP WAIT support, it's no longer necessary to start with slow
JTAG clock.
Change-Id: I2cb62c44752b27e6854637e8073e9f9501f5a660
Signed-off-by: Matthias Welwarsky <matthias@welwarsky.de>
Reviewed-on: http://openocd.zylin.com/3190
Tested-by: jenkins
Reviewed-by: Felipe Balbi <balbi@ti.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Diffstat (limited to 'tcl')
| -rw-r--r-- | tcl/board/ti_am437x_idk.cfg | 6 | ||||
| -rw-r--r-- | tcl/target/am437x.cfg | 4 |
2 files changed, 1 insertions, 9 deletions
diff --git a/tcl/board/ti_am437x_idk.cfg b/tcl/board/ti_am437x_idk.cfg index ce9c9a73..65e2094e 100644 --- a/tcl/board/ti_am437x_idk.cfg +++ b/tcl/board/ti_am437x_idk.cfg @@ -4,13 +4,9 @@ source [find interface/ftdi/xds100v2.cfg] transport select jtag -adapter_khz 1000 +adapter_khz 30000 source [find target/am437x.cfg] $_TARGETNAME configure -event reset-init { init_platform 0x61a11b32 } reset_config trst_and_srst - -init -ftdi_set_signal PWR_RST 1 -jtag arp_init diff --git a/tcl/target/am437x.cfg b/tcl/target/am437x.cfg index 507d51e2..4f97f812 100644 --- a/tcl/target/am437x.cfg +++ b/tcl/target/am437x.cfg @@ -993,11 +993,7 @@ proc config_ddr3 { SDRAM_CONFIG } { proc init_platform { SDRAM_CONFIG } { config_opp100 config_ddr3 $SDRAM_CONFIG - - # now that PLLs are configured, we can run JTAG at full speed - adapter_khz 16000 } -$_TARGETNAME configure -event reset-start { adapter_khz 1000 } $_TARGETNAME configure -event reset-init { init_platform 0x61a013b2 } $_TARGETNAME configure -event reset-end { disable_watchdog } |