flash Kinetis: implement automatic bank creation based on device probe

Kinetis flash driver services huge number of MCU types. They have
one, two or four flash banks with option of FlexNVM. It would
require ~36 config files just for Kx series, more for KLx, KVx and KE1x.

The change implements alternative approach:
- configuration file creates just one pflash bank (common for all devices)
- when a device is probed, additional pflash or flexnvm banks are created
based on flash layout of the connected MCU
- created banks have names with optional numbering e.g. kx.pflash0 kx.pflash1
kx.flexnvm0 kx.flexnvm1
- the first bank gets renamed if numbering is used

Automatic bank creation is enabled by tcl command 'kinetis create_banks'.

Used solution has a drawback: other banks than pflash0 are not accessible
until pflash0 is probed. Fortunately gdb attach and standard programming
accesses banks in right sequence.

Change-Id: I5b9037cbefdb8a4176b7715fbcc3af4da4c1ab60
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/3925
Tested-by: jenkins
Reviewed-by: Joakim Nohlgård <joakim.nohlgard@eistec.se>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

4 files changed, 8 insertions, 8 deletions

diff --git a/tcl/target/ke1xf.cfg b/tcl/target/ke1xf.cfg
index 94b175f2..b1200cec 100644
--- a/tcl/target/ke1xf.cfg
+++ b/tcl/target/ke1xf.cfg
@@ -5,5 +5,3 @@
 set CHIPNAME ke
 
 source [find target/kx.cfg]
-
-flash bank flexnvm kinetis 0 0 0 0 $_TARGETNAME
diff --git a/tcl/target/ke1xz.cfg b/tcl/target/ke1xz.cfg
index db2d1a42..6a3f509e 100644
--- a/tcl/target/ke1xz.cfg
+++ b/tcl/target/ke1xz.cfg
@@ -5,5 +5,3 @@
 set CHIPNAME ke
 
 source [find target/klx.cfg]
-
-flash bank flexnvm kinetis 0 0 0 0 $_TARGETNAME
diff --git a/tcl/target/klx.cfg b/tcl/target/klx.cfg
index 0df6612f..c2de9f7d 100644
--- a/tcl/target/klx.cfg
+++ b/tcl/target/klx.cfg
@@ -1,5 +1,6 @@
 #
-# Freescale Kinetis KL series devices
+# NXP (former Freescale) Kinetis KL series devices
+# Also used for Cortex-M0+ equipped members of KVx and KE1xZ series
 #
 
 source [find target/swj-dp.tcl]
@@ -31,8 +32,9 @@ target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.cpu
 
 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
 
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.pflash
 flash bank $_FLASHNAME kinetis 0 0 0 0 $_TARGETNAME
+kinetis create_banks
 
 # Table 5-1. Clock Summary of KL25 Sub-Family Reference Manual
 # specifies up to 1MHz for VLPR mode.
diff --git a/tcl/target/kx.cfg b/tcl/target/kx.cfg
index b39ee3dd..cf777135 100644
--- a/tcl/target/kx.cfg
+++ b/tcl/target/kx.cfg
@@ -1,5 +1,6 @@
 #
-# Freescale Kinetis Kx series devices
+# NXP (former Freescale) Kinetis Kx series devices
+# Also used for Cortex-M4 equipped members of KVx and KE1xF series
 #
 
 source [find target/swj-dp.tcl]
@@ -35,8 +36,9 @@ target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.cpu
 
 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
 
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.pflash
 flash bank $_FLASHNAME kinetis 0 0 0 0 $_TARGETNAME
+kinetis create_banks
 
 adapter_khz 1000