diff options
| author | Paul Fertser <fercerpav@gmail.com> | 2015-01-10 13:19:26 +0300 |
|---|---|---|
| committer | Spencer Oliver <spen@spen-soft.co.uk> | 2015-01-26 20:54:51 +0000 |
| commit | a1bbf4b75bc68aeed3c72e37b302bb36757401c2 (patch) | |
| tree | 6a60ed0faa53c7aead5f62c4f6fe162b48d14df6 /tcl/target/stm32f2x.cfg | |
| parent | 7dd50909e32296fc4ceff64d8443f5b9fa75bbca (diff) | |
cfg: add srst_nogate to the supported targets, remove from board configs
It depends on the particular target whether it can work with SRST
asserted or not, so this belongs to the target config rather than the
board config.
Also, this allows for simple
openocd -f myboard.cfg -c "reset_config connect_assert_srst"
command to be used whenever a user feels a need to connect to an
unresponsive target.
Change-Id: I3d8da9ae47088fc0c75a20bfdd20074be1014de0
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2459
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Diffstat (limited to 'tcl/target/stm32f2x.cfg')
| -rw-r--r-- | tcl/target/stm32f2x.cfg | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/tcl/target/stm32f2x.cfg b/tcl/target/stm32f2x.cfg index 62e35a4c..0ac73a51 100644 --- a/tcl/target/stm32f2x.cfg +++ b/tcl/target/stm32f2x.cfg @@ -70,6 +70,8 @@ $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME stm32f2x 0 0 0 0 $_TARGETNAME +reset_config srst_nogate + if {![using_hla]} { # if srst is not fitted use SYSRESETREQ to # perform a soft reset |