diff options
| author | Paul Fertser <fercerpav@gmail.com> | 2013-09-28 14:23:15 +0400 |
|---|---|---|
| committer | Andreas Fritiofson <andreas.fritiofson@gmail.com> | 2014-08-11 21:25:56 +0000 |
| commit | c7384117c66e8f18896ca09ab8095d6da16bb1e5 (patch) | |
| tree | 2513a1c61d2d8c6d92171a238281189ca3962f4a /tcl/target/stm32_stlink.cfg | |
| parent | f701c0cbeb346df4cda378d3b4d5136aabba3b37 (diff) | |
Allow transports to override the selected target (hla configs unification)
This should allow to share common configs for both regular access and
high-level adapters.
Use the newly-added functionality in stlink and icdi drivers, amend
the configs accordingly.
Runtime-tested with a TI tm4c123g board.
Change-Id: Ibb88266a4ca25f06f6c073e916c963f017447bad
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
[gus@projectgus.com: context-specific deprecation warnings]
Signed-off-by: Angus Gratton <gus@projectgus.com>
[andrew.smirnov@gmail.com: additional nrf51.cfg mods]
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Reviewed-on: http://openocd.zylin.com/1664
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Diffstat (limited to 'tcl/target/stm32_stlink.cfg')
| -rw-r--r-- | tcl/target/stm32_stlink.cfg | 61 |
1 files changed, 1 insertions, 60 deletions
diff --git a/tcl/target/stm32_stlink.cfg b/tcl/target/stm32_stlink.cfg index 96bce5f0..295292e3 100644 --- a/tcl/target/stm32_stlink.cfg +++ b/tcl/target/stm32_stlink.cfg @@ -1,60 +1 @@ -# -# stm32 stlink pseudo target -# - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME stm32f1x -} - -# Work-area is a space in RAM used for flash programming -# By default use 4kB (as found on some STM32F100s) -if { [info exists WORKAREASIZE] } { - set _WORKAREASIZE $WORKAREASIZE -} else { - set _WORKAREASIZE 0x1000 -} - -if { [info exists CPUTAPID] } { - set _CPUTAPID $CPUTAPID -} else { - # this is the SW-DP tap id not the jtag tap id - set _CPUTAPID 0x1ba01477 -} - -if { [info exists TRANSPORT] } { - set _TRANSPORT $TRANSPORT - if { $TRANSPORT == "hla_jtag" } { - if { [info exists CPUTAPID] == 0 } { - # jtag requires us to use the jtag tap id - set _CPUTAPID 0x3ba00477 - } - } -} else { - set _TRANSPORT hla_swd -} - -# add deprecated transport name check -if { $_TRANSPORT == "stlink_swd" } { - set _TRANSPORT "hla_swd" - echo "DEPRECATED! use 'hla_swd' transport not 'stlink_swd'" -} - -if { $_TRANSPORT == "stlink_jtag" } { - set _TRANSPORT "hla_jtag" - echo "DEPRECATED! use 'hla_jtag' transport not 'stlink_jtag'" -} -# end deprecated checks - -# -# possibles value are hla_swd or hla_jtag -# -transport select $_TRANSPORT - -hla newtap $_CHIPNAME cpu -expected-id $_CPUTAPID - -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME hla_target -chain-position $_TARGETNAME - -$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 +echo "WARNING: stm32_stlink.cfg is deprecated (and does nothing, you can safely remove it.)" |