diff options
author | dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-09-21 18:48:22 +0000 |
---|---|---|
committer | dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-09-21 18:48:22 +0000 |
commit | 71af49ca7fb11b0bd0c1ba9578826f49288b68ef (patch) | |
tree | 9ba8dd705f83aa44879bc7b5817ce40317f1fc28 /tcl/target/readme.txt | |
parent | 86a7d813a165fda2816b8152342219b6c4ae2fc4 (diff) |
Remove annoying end-of-line whitespace from tcl/* files
git-svn-id: svn://svn.berlios.de/openocd/trunk@2743 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Diffstat (limited to 'tcl/target/readme.txt')
-rw-r--r-- | tcl/target/readme.txt | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/tcl/target/readme.txt b/tcl/target/readme.txt index ca23c64b..39f8d124 100644 --- a/tcl/target/readme.txt +++ b/tcl/target/readme.txt @@ -1,5 +1,5 @@ Prerequisites: -The users of OpenOCD as well as computer programs interacting with OpenOCD are expecting that certain commands +The users of OpenOCD as well as computer programs interacting with OpenOCD are expecting that certain commands do the same thing across all the targets. Rules to follow when writing scripts: @@ -8,20 +8,20 @@ Rules to follow when writing scripts: reset flash info <bank> and - reset + reset flash erase_address <start> <len> and reset init load - -In most cases this can be accomplished by specifying the default startup mode as reset_init (target command + +In most cases this can be accomplished by specifying the default startup mode as reset_init (target command in the configuration file). - -2. If the target is correctly configured, flash must be writable without any other helper commands. It is + +2. If the target is correctly configured, flash must be writable without any other helper commands. It is assumed that all write-protect mechanisms should be disabled. 3. The configuration scripts should be defined such as the binary that was written to flash verifies -(turn off remapping, checksums, etc...) +(turn off remapping, checksums, etc...) flash write_image [file] <parameters> verify_image [file] <parameters> |