diff options
author | Paul Fertser <fercerpav@gmail.com> | 2015-01-10 13:52:35 +0300 |
---|---|---|
committer | Spencer Oliver <spen@spen-soft.co.uk> | 2015-01-26 20:57:41 +0000 |
commit | 38107ff9665fd77c275fa4b840e10bc61098e293 (patch) | |
tree | 987d99c3f401f65e6591f6d12c92e3c7e20f533f /tcl/target/kl25.cfg | |
parent | d940a3224b3c06e6008c03d8dcb2682ea4135b7a (diff) |
tcl/target: consolidate Kinetis configs
Change-Id: I75fe6b239ff435f700459e7d7040616503fa458e
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2460
Reviewed-by: Andreas Färber <afaerber@suse.de>
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Diffstat (limited to 'tcl/target/kl25.cfg')
-rw-r--r-- | tcl/target/kl25.cfg | 69 |
1 files changed, 2 insertions, 67 deletions
diff --git a/tcl/target/kl25.cfg b/tcl/target/kl25.cfg index b75e0a56..0e716e3a 100644 --- a/tcl/target/kl25.cfg +++ b/tcl/target/kl25.cfg @@ -2,70 +2,5 @@ # Freescale Kinetis KL25 devices # -# -# KL25 devices support both JTAG and SWD transports. -# -source [find target/swj-dp.tcl] - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME kl25 -} - -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} - -# Work-area is a space in RAM used for flash programming -# By default use 4kB -if { [info exists WORKAREASIZE] } { - set _WORKAREASIZE $WORKAREASIZE -} else { - set _WORKAREASIZE 0x1000 -} - -if { [info exists CPUTAPID] } { - set _CPUTAPID $CPUTAPID -} else { - set _CPUTAPID 0x0bc11477 -} - -swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID - -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_CHIPNAME.cpu - -# It is important that "kinetis mdm check_security" is called for -# 'examine-end' event and not 'eximine-start'. Calling it in 'examine-start' -# causes "kinetis mdm check_security" to fail the first time openocd -# calls it when it tries to connect after the CPU has been power-cycled. -$_CHIPNAME.cpu configure -event examine-end { - kinetis mdm check_security -} - -$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 - -set _FLASHNAME $_CHIPNAME.flash -flash bank $_FLASHNAME kinetis 0 0 0 0 $_TARGETNAME - -# Table 5-1. Clock Summary of KL25 Sub-Family Reference Manual -# specifies up to 1MHz for VLPR mode. -adapter_khz 1000 - -reset_config srst_nogate - -if {![using_hla]} { - # if srst is not fitted use SYSRESETREQ to - # perform a soft reset - cortex_m reset_config sysresetreq -} - -$_TARGETNAME configure -event reset-init { - # Table 5-1. Clock Summary of KL25 Sub-Family Reference Manual - # specifies up to 24MHz for run mode; Table 17 of Sub-Family Data - # Sheet rev4 lists 25MHz as the maximum frequency. - adapter_khz 24000 -} +set CHIPNAME kl25 +source [find target/klx.cfg] |