diff options
| author | Ash Charles <ash@gumstix.com> | 2011-09-30 16:17:21 -0700 |
|---|---|---|
| committer | Øyvind Harboe <oyvind.harboe@zylin.com> | 2011-10-01 13:11:02 +0200 |
| commit | a17adf0601f66617f2203c6d4db168a8e8c55055 (patch) | |
| tree | f0870a0070b75b576d84a349c66bd4916724b4c1 /tcl/board | |
| parent | ac49e24149680e9a5c59845648c0031926b7c919 (diff) | |
Verdex: Add support for Gumstix Verdex boards.
Gumstix Verdex is a PXA270-based series of computer-on-modules. This
configuration file is based off the voipac.cfg configuration with
a different flash memory configuration. This has been tested flyswatter
adapter to reflash a Gumstix Verdex XL6P board.
Diffstat (limited to 'tcl/board')
| -rw-r--r-- | tcl/board/verdex.cfg | 17 |
1 files changed, 17 insertions, 0 deletions
diff --git a/tcl/board/verdex.cfg b/tcl/board/verdex.cfg new file mode 100644 index 00000000..6da98752 --- /dev/null +++ b/tcl/board/verdex.cfg @@ -0,0 +1,17 @@ +# Config for Gumstix Verdex XM4 and XL6P (PXA270) + +set CHIPNAME verdex +source [find target/pxa270.cfg] + +# The board supports separate reset lines +# Override this in the interface config for parallel dongles +reset_config trst_and_srst separate + +# XM4 = 400MHz, XL6P = 600MHz...let's run at 0.1*400MHz=40MHz +adapter_khz 40000 + +# flash bank <driver> <base> <size> <chip_width> <bus_width> +# XL6P has 32 MB flash +flash bank $_CHIPNAME.flash0 cfi 0x00000000 0x02000000 2 2 $_TARGETNAME +# XM4 has 16 MB flash +#flash bank $_CHIPNAME.flash0 cfi 0x00000000 0x01000000 2 2 $_TARGETNAME |