diff options
author | Antonio Borneo <borneo.antonio@gmail.com> | 2011-11-18 13:09:14 +0800 |
---|---|---|
committer | Spencer Oliver <spen@spen-soft.co.uk> | 2011-11-21 22:09:09 +0000 |
commit | c8f4d82b45647d6db3af122bcd7aabe4670c61b0 (patch) | |
tree | b264bc1ea153e8867db083b644274aa858aa6428 /tcl/board/spear300evb_mod.cfg | |
parent | 56e64812b837fc6c66a7e4c8033ec4329a0234e5 (diff) |
TCL: Add board file for EVALSPEAr300
Initial support for SPEAr300 chip and for evaluation
board named EVALSPEAr300.
Currently supports only those parts in common with
SPEAr310.
Change-Id: I8075aa721cf3dfaac561ee51e5df4ce9a2992e3e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/230
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Diffstat (limited to 'tcl/board/spear300evb_mod.cfg')
-rw-r--r-- | tcl/board/spear300evb_mod.cfg | 26 |
1 files changed, 26 insertions, 0 deletions
diff --git a/tcl/board/spear300evb_mod.cfg b/tcl/board/spear300evb_mod.cfg new file mode 100644 index 00000000..91cad5f1 --- /dev/null +++ b/tcl/board/spear300evb_mod.cfg @@ -0,0 +1,26 @@ +# Configuration for the ST SPEAr300 Evaluation board +# EVALSPEAr300 Rev. 1.0, modified to enable SRST on JTAG connector +# http://www.st.com/spear +# +# List of board modifications to enable SRST, as reported in +# ST Application Note (FIXME: add reference). +# - Modifications on the top layer: +# 1. replace reset chip U4 with a STM6315SDW13F; +# - Modifications on the bottom layer: +# 2. add 0 ohm resistor R10. It is located close to JTAG connector. +# 3. add a 10K ohm pull-up resistor on the reset wire named as +# POWERGOOD in the schematic. +# +# The easier way to do modification 3, is to use a resistor in package +# 0603 and solder it between R10 and R54: +# - one pad soldered with the pad of R54 connected to 3.3V (this +# is the pad of R54 far from JTAG connector J4) +# - the other pad soldered with the nearest pad of R10. +# +# Date: 2011-11-18 +# Author: Antonio Borneo <borneo.antonio@gmail.com> + + +# Modified boards has SRST on JTAG connector +set BOARD_HAS_SRST 1 +source [find board/spear300evb.cfg] |