diff options
author | oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-08-21 09:01:00 +0000 |
---|---|---|
committer | oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-08-21 09:01:00 +0000 |
commit | 5c50cf802ca53638520f2a68e8822038420d4e08 (patch) | |
tree | 60d68102bcea362090d7dd307f2c70c9df6929e9 /tcl/board/at91sam7sx.cfg | |
parent | 0a7158140a2fb8a6bcd926c4ca2fc1385c515c80 (diff) |
native line endings
git-svn-id: svn://svn.berlios.de/openocd/trunk@2603 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Diffstat (limited to 'tcl/board/at91sam7sx.cfg')
-rw-r--r-- | tcl/board/at91sam7sx.cfg | 110 |
1 files changed, 55 insertions, 55 deletions
diff --git a/tcl/board/at91sam7sx.cfg b/tcl/board/at91sam7sx.cfg index b977cf03..516a09c7 100644 --- a/tcl/board/at91sam7sx.cfg +++ b/tcl/board/at91sam7sx.cfg @@ -1,55 +1,55 @@ -#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config srst_only srst_pulls_trst
-
-if { [info exists CHIPNAME] } {
- set _CHIPNAME $CHIPNAME
-} else {
- set _CHIPNAME at91sam7s
-}
-
-if { [info exists ENDIAN] } {
- set _ENDIAN $ENDIAN
-} else {
- set _ENDIAN little
-}
-
-if { [info exists CPUTAPID ] } {
- set _CPUTAPID $CPUTAPID
-} else {
- set _CPUTAPID 0x3f0f0f0f
-}
-
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
-$_TARGETNAME configure -event reset-init {
- soft_reset_halt
- # RSTC_CR : Reset peripherals
- mww 0xfffffd00 0xa5000004
- # disable watchdog
- mww 0xfffffd44 0x00008000
- # enable user reset
- mww 0xfffffd08 0xa5000001
- # CKGR_MOR : enable the main oscillator
- mww 0xfffffc20 0x00000601
- sleep 10
- # CKGR_PLLR: 96.1097 MHz
- mww 0xfffffc2c 0x00481c0e
- sleep 10
- # PMC_MCKR : MCK = PLL / 2 ~= 48 MHz
- mww 0xfffffc30 0x00000007
- sleep 10
- # MC_FMR: flash mode (FWS=1,FMCN=73)
- mww 0xffffff60 0x00490100
- sleep 100
-}
-
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0
-
-#flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>]
-flash bank at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432
-
-# For more information about the configuration files, take a look at:
-# openocd.texi
+#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config srst_only srst_pulls_trst + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME at91sam7s +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x3f0f0f0f +} + +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] + +target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi +$_TARGETNAME configure -event reset-init { + soft_reset_halt + # RSTC_CR : Reset peripherals + mww 0xfffffd00 0xa5000004 + # disable watchdog + mww 0xfffffd44 0x00008000 + # enable user reset + mww 0xfffffd08 0xa5000001 + # CKGR_MOR : enable the main oscillator + mww 0xfffffc20 0x00000601 + sleep 10 + # CKGR_PLLR: 96.1097 MHz + mww 0xfffffc2c 0x00481c0e + sleep 10 + # PMC_MCKR : MCK = PLL / 2 ~= 48 MHz + mww 0xfffffc30 0x00000007 + sleep 10 + # MC_FMR: flash mode (FWS=1,FMCN=73) + mww 0xffffff60 0x00490100 + sleep 100 +} + +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 + +#flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>] +flash bank at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432 + +# For more information about the configuration files, take a look at: +# openocd.texi |