diff options
author | zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-05-27 06:44:43 +0000 |
---|---|---|
committer | zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-05-27 06:44:43 +0000 |
commit | 140d6c8e7948710a764965075bfaa700efd09802 (patch) | |
tree | ccb281820c12961eb036d2a00040164d114ad057 /src/tcl/target/str750.cfg | |
parent | 7c0e823d0a57df99adc5b1b7975406bfd9e0d9fb (diff) |
Move TCL script files -- Step 1 of 2:
- Move src/target/{interface,target,board,test}/ into src/tcl/
- Remove existing rules in src/Makefile.am and src/target/Makefile.am.
- Add Makefile.am handling of *.cfg and *.tcl files in top Makefile.am:
- Add dist-hook to include such files under src/tcl in the distribution.
- Add install-data-hook to install contents of '$(top_srcdir)/src/tcl/'.
- Add uninstall-hook to remove the installed script files.
- Change paths to (un)install script files in '$(pkgdatadir)/scripts'.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1918 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Diffstat (limited to 'src/tcl/target/str750.cfg')
-rw-r--r-- | src/tcl/target/str750.cfg | 51 |
1 files changed, 51 insertions, 0 deletions
diff --git a/src/tcl/target/str750.cfg b/src/tcl/target/str750.cfg new file mode 100644 index 00000000..6b5e66c3 --- /dev/null +++ b/src/tcl/target/str750.cfg @@ -0,0 +1,51 @@ +#STR750 CPU + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME str750 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x4f1f0041 +} + +# jtag speed +jtag_khz 10 + +#use combined on interfaces or targets that can't set TRST/SRST separately +#reset_config trst_and_srst srst_pulls_trst +reset_config trst_and_srst srst_pulls_trst + +#jtag scan chain + +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID + +#jtag nTRST and nSRST delay +jtag_nsrst_delay 500 +jtag_ntrst_delay 500 + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm7tdmi -endian little -chain-position 0 -variant arm7tdmi + +$_TARGETNAME configure -event reset-start { jtag_khz 10 } +$_TARGETNAME configure -event reset-init { jtag_khz 3000 } +$_TARGETNAME configure -event gdb-flash-erase-start { + flash protect 0 0 7 off + flash protect 1 0 1 off +} + +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 + +#flash bank <driver> <base> <size> <chip_width> <bus_width> +flash bank str7x 0x20000000 0x00040000 0 0 0 STR75x +flash bank str7x 0x200C0000 0x00004000 0 0 0 STR75x + |