Move TCL script files -- Step 1 of 2:

- Move src/target/{interface,target,board,test}/ into src/tcl/
- Remove existing rules in src/Makefile.am and src/target/Makefile.am.
- Add Makefile.am handling of *.cfg and *.tcl files in top Makefile.am:
  - Add dist-hook to include such files under src/tcl in the distribution.
  - Add install-data-hook to install contents of '$(top_srcdir)/src/tcl/'.
  - Add uninstall-hook to remove the installed script files.
- Change paths to (un)install script files in '$(pkgdatadir)/scripts'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1918 b42882b7-edfa-0310-969c-e2dbd0fdcd60

1 files changed, 63 insertions, 0 deletions

diff --git a/src/tcl/target/omap5912.cfg b/src/tcl/target/omap5912.cfg
new file mode 100644
index 00000000..2942ad74
--- /dev/null
+++ b/src/tcl/target/omap5912.cfg
@@ -0,0 +1,63 @@
+#TI OMAP5912 dual core processor - http://www.ti.com 
+#on a OMAP5912 OSK board http://www.spectrumdigital.com.
+
+if { [info exists CHIPNAME] } {	
+   set  _CHIPNAME $CHIPNAME    
+} else {	 
+   set  _CHIPNAME omap5912
+}
+
+if { [info exists ENDIAN] } {	
+   set  _ENDIAN $ENDIAN    
+} else {	 
+  # this defaults to a bigendian
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+  # force an error till we get a good number
+   set _CPUTAPID 0xffffffff
+}
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst
+
+#jtag scan chain
+jtag newtap $_CHIPNAME unknown1 -irlen 38 -ircapture 0x0 -irmask 0x0 
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0 -expected-id $_CPUTAPID
+jtag newtap $_CHIPNAME unknown2 irlen 8 -ircapture  0x0 -irmask 0x0 
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+
+$_TARGETNAME configure -event reset-init {
+	#
+	# halt target
+	#
+	poll
+	sleep 1
+	halt
+	wait_halt
+	#
+	# disable wdt
+	#
+	mww 0xfffec808 0x000000f5
+	mww 0xfffec808 0x000000a0
+
+	mww 0xfffeb048 0x0000aaaa
+	sleep 500
+	mww 0xfffeb048 0x00005555
+	sleep 500
+	#
+	# detect flash
+	#
+	flash probe 0
+}
+
+# omap5912 lcd frame buffer as working area
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x3e800 -work-area-backup 0
+
+#flash bank <driver> <base> <size> <chip_width> <bus_width>
+flash bank cfi 0x00000000 0x1000000 2 2 0