diff options
author | zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-05-27 06:44:43 +0000 |
---|---|---|
committer | zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-05-27 06:44:43 +0000 |
commit | 140d6c8e7948710a764965075bfaa700efd09802 (patch) | |
tree | ccb281820c12961eb036d2a00040164d114ad057 /src/tcl/board/x300t.cfg | |
parent | 7c0e823d0a57df99adc5b1b7975406bfd9e0d9fb (diff) |
Move TCL script files -- Step 1 of 2:
- Move src/target/{interface,target,board,test}/ into src/tcl/
- Remove existing rules in src/Makefile.am and src/target/Makefile.am.
- Add Makefile.am handling of *.cfg and *.tcl files in top Makefile.am:
- Add dist-hook to include such files under src/tcl in the distribution.
- Add install-data-hook to install contents of '$(top_srcdir)/src/tcl/'.
- Add uninstall-hook to remove the installed script files.
- Change paths to (un)install script files in '$(pkgdatadir)/scripts'.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1918 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Diffstat (limited to 'src/tcl/board/x300t.cfg')
-rw-r--r-- | src/tcl/board/x300t.cfg | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/src/tcl/board/x300t.cfg b/src/tcl/board/x300t.cfg new file mode 100644 index 00000000..985f44ed --- /dev/null +++ b/src/tcl/board/x300t.cfg @@ -0,0 +1,30 @@ +# This is for the T-Home X300T / X301T IPTV box, +# which are based on IPTV reference designs from Kiss/Cisco KMM-3*** +# +# It has Sigma Designs SMP8634 chip. +source [find target/smp8634.cfg] + +$_TARGETNAME configure -event reset-init { x300t_init } + +# 1MB CFI capable flash +# flash bank <driver> <base> <size> <chip_width> <bus_width> +flash bank cfi 0xac000000 0x100000 2 2 0 + +proc x300t_init { } { + # Setup SDRAM config and flash mapping + # initialize ram + mww 0xa003fffc 3 + mww 0xa003fffc 2 + mww 0xa0030000 0xE34111BA + mww 0xa003fffc 0xa4444 + mww 0xa003fffc 0 + + # remap boot vector in CPU local RAM + mww 0xa006f000 0x60000 + + # map flash to CPU address space REG_BASE_cpu_block+CPU_remap4 + mww 0x0006f010 0x48000000 + + # map flash addr to REG_BASE_cpu_block + LR_XENV_LOCATION (normally done by XOS) + mww 0x00061ff0 0x48000000 +} |