Conform to C99 integer types format specifiers

Review and modify to conform to C99 integer types format specifiers.
Use arm-none-eabi toolchain to build successfully.

Change-Id: If855072a8f88886809309155ac6d031dcfcbc4b2
Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com>
Signed-off-by: Hsiangkai <hsiangkai@gmail.com>
Reviewed-on: http://openocd.zylin.com/1794
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

1 files changed, 17 insertions, 19 deletions

diff --git a/src/target/nds32_v3m.c b/src/target/nds32_v3m.c
index 2c0d2557..accc8d05 100644
--- a/src/target/nds32_v3m.c
+++ b/src/target/nds32_v3m.c
@@ -52,7 +52,7 @@ static int nds32_v3m_activate_hardware_breakpoint(struct target *target)
 				/* enable breakpoint (physical address) */
 				aice_write_debug_reg(aice, NDS_EDM_SR_BPC0 + brp_num, 0xA);
 
-			LOG_DEBUG("Add hardware BP %d at %08" PRIx32, brp_num,
+			LOG_DEBUG("Add hardware BP %u at %08" PRIx32, brp_num,
 					bp->address);
 
 			brp_num--;
@@ -80,7 +80,7 @@ static int nds32_v3m_deactivate_hardware_breakpoint(struct target *target)
 		else
 			return ERROR_FAIL;
 
-		LOG_DEBUG("Remove hardware BP %d at %08" PRIx32, brp_num,
+		LOG_DEBUG("Remove hardware BP %u at %08" PRIx32, brp_num,
 				bp->address);
 
 		brp_num--;
@@ -127,9 +127,8 @@ static int nds32_v3m_activate_hardware_watchpoint(struct target *target)
 			/* enable watchpoint */
 			aice_write_debug_reg(aice, NDS_EDM_SR_BPC0 + wp_num, wp_config);
 
-			LOG_DEBUG("Add hardware wathcpoint %d at %08" PRIx32
-					" mask %08" PRIx32, wp_num,
-					wp->address, wp->mask);
+			LOG_DEBUG("Add hardware wathcpoint %" PRId32 " at %08" PRIx32
+					" mask %08" PRIx32, wp_num, wp->address, wp->mask);
 
 			wp_num++;
 		} else if (nds32_v3m->nds32.global_stop) {
@@ -169,9 +168,8 @@ static int nds32_v3m_deactivate_hardware_watchpoint(struct target *target)
 			/* disable watchpoint */
 			aice_write_debug_reg(aice, NDS_EDM_SR_BPC0 + wp_num, 0x0);
 
-			LOG_DEBUG("Remove hardware wathcpoint %d at %08" PRIx32
-					" mask %08" PRIx32, wp_num,
-					wp->address, wp->mask);
+			LOG_DEBUG("Remove hardware wathcpoint %" PRId32 " at %08" PRIx32
+					" mask %08" PRIx32, wp_num, wp->address, wp->mask);
 			wp_num++;
 		} else if (nds32_v3m->nds32.global_stop) {
 			clean_global_stop = true;
@@ -198,7 +196,7 @@ static int nds32_v3m_check_interrupt_stack(struct nds32 *nds32)
 	nds32->current_interrupt_level = (val_ir0 >> 1) & 0x3;
 
 	if (nds32_reach_max_interrupt_level(nds32))
-		LOG_ERROR("<-- TARGET ERROR! Reaching the max interrupt stack level %d. -->",
+		LOG_ERROR("<-- TARGET ERROR! Reaching the max interrupt stack level %" PRIu32 ". -->",
 				nds32->current_interrupt_level);
 
 	/* backup $ir6 to avoid suppressed exception overwrite */
@@ -254,11 +252,11 @@ static int nds32_v3m_add_breakpoint(struct target *target,
 			LOG_WARNING("<-- TARGET WARNING! Insert too many "
 					"hardware breakpoints/watchpoints! "
 					"The limit of combined hardware "
-					"breakpoints/watchpoints is %d. -->",
+					"breakpoints/watchpoints is %" PRId32 ". -->",
 					nds32_v3m->n_hbr);
 			LOG_WARNING("<-- TARGET STATUS: Inserted number of "
-					"hardware breakpoint: %d, hardware "
-					"watchpoints: %d. -->",
+					"hardware breakpoint: %" PRId32 ", hardware "
+					"watchpoints: %" PRId32 ". -->",
 					nds32_v3m->n_hbr - nds32_v3m->next_hbr_index - 1,
 					nds32_v3m->used_n_wp);
 			return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
@@ -328,9 +326,9 @@ static int nds32_v3m_add_watchpoint(struct target *target,
 
 		LOG_WARNING("<-- TARGET WARNING! Insert too many hardware "
 				"watchpoints! The limit of hardware watchpoints "
-				"is %d. -->", nds32_v3m->n_hwp);
+				"is %" PRId32 ". -->", nds32_v3m->n_hwp);
 		LOG_WARNING("<-- TARGET STATUS: Inserted number of "
-				"hardware watchpoint: %d. -->",
+				"hardware watchpoint: %" PRId32 ". -->",
 				nds32_v3m->used_n_wp);
 		return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
 	}
@@ -347,11 +345,11 @@ static int nds32_v3m_add_watchpoint(struct target *target,
 
 		LOG_WARNING("<-- TARGET WARNING! Insert too many hardware "
 				"breakpoints/watchpoints! The limit of combined "
-				"hardware breakpoints/watchpoints is %d. -->",
+				"hardware breakpoints/watchpoints is %" PRId32 ". -->",
 				nds32_v3m->n_hbr);
 		LOG_WARNING("<-- TARGET STATUS: Inserted number of "
-				"hardware breakpoint: %d, hardware "
-				"watchpoints: %d. -->",
+				"hardware breakpoint: %" PRId32 ", hardware "
+				"watchpoints: %" PRId32 ". -->",
 				nds32_v3m->n_hbr - nds32_v3m->next_hbr_index - 1,
 				nds32_v3m->used_n_wp);
 		return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
@@ -446,9 +444,9 @@ static int nds32_v3m_examine(struct target *target)
 	/* hardware watchpoint is inserted from low index to high index */
 	nds32_v3m->next_hwp_index = 0;
 
-	LOG_INFO("%s: total hardware breakpoint %d (simple breakpoint %d)",
+	LOG_INFO("%s: total hardware breakpoint %" PRId32 " (simple breakpoint %" PRId32 ")",
 			target_name(target), nds32_v3m->n_hbr, nds32_v3m->n_hbr - nds32_v3m->n_hwp);
-	LOG_INFO("%s: total hardware watchpoint %d", target_name(target), nds32_v3m->n_hwp);
+	LOG_INFO("%s: total hardware watchpoint %" PRId32, target_name(target), nds32_v3m->n_hwp);
 
 	nds32->target->state = TARGET_RUNNING;
 	nds32->target->debug_reason = DBG_REASON_NOTHALTED;