adi_v5: Remove unused features of the DAP and SWD interfaces

These features are not currently used so remove or disable them before
something starts to. Not having them around simplifies redesign of the
APIs.

Change-Id: Iad25cc71c48b68a1fa71558141bf14d5ab20d659
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1955
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>

1 files changed, 1 insertions, 44 deletions

diff --git a/src/target/arm_adi_v5.h b/src/target/arm_adi_v5.h
index c51e8f81..09b6b0d7 100644
--- a/src/target/arm_adi_v5.h
+++ b/src/target/arm_adi_v5.h
@@ -220,7 +220,7 @@ struct adiv5_dap {
  * both JTAG and SWD transports.  All submitted transactions are logically
  * queued, until the queue is executed by run().  Some implementations might
  * execute transactions as soon as they're submitted, but no status is made
- * availablue until run().
+ * available until run().
  */
 struct dap_ops {
 	/** If the DAP transport isn't SWD, it must be JTAG.  Upper level
@@ -228,10 +228,6 @@ struct dap_ops {
 	 */
 	bool	is_swd;
 
-	/** Reads the DAP's IDCODe register. */
-	int (*queue_idcode_read)(struct adiv5_dap *dap,
-			uint8_t *ack, uint32_t *data);
-
 	/** DP register read. */
 	int (*queue_dp_read)(struct adiv5_dap *dap, unsigned reg,
 			uint32_t *data);
@@ -245,9 +241,6 @@ struct dap_ops {
 	/** AP register write. */
 	int (*queue_ap_write)(struct adiv5_dap *dap, unsigned reg,
 			uint32_t data);
-	/** AP read block. */
-	int (*queue_ap_read_block)(struct adiv5_dap *dap, unsigned reg,
-			uint32_t blocksize, uint8_t *buffer);
 
 	/** AP operation abort. */
 	int (*queue_ap_abort)(struct adiv5_dap *dap, uint8_t *ack);
@@ -266,24 +259,6 @@ enum ap_type {
 };
 
 /**
- * Queue an IDCODE register read.  This is primarily useful for SWD
- * transports, where it is required as part of link initialization.
- * (For JTAG, this register is read as part of scan chain setup.)
- *
- * @param dap The DAP used for reading.
- * @param ack Pointer to where transaction status will be stored.
- * @param data Pointer saying where to store the IDCODE value.
- *
- * @return ERROR_OK for success, else a fault code.
- */
-static inline int dap_queue_idcode_read(struct adiv5_dap *dap,
-		uint8_t *ack, uint32_t *data)
-{
-	assert(dap->ops != NULL);
-	return dap->ops->queue_idcode_read(dap, ack, data);
-}
-
-/**
  * Queue a DP register read.
  * Note that not all DP registers are readable; also, that JTAG and SWD
  * have slight differences in DP register support.
@@ -354,24 +329,6 @@ static inline int dap_queue_ap_write(struct adiv5_dap *dap,
 }
 
 /**
- * Queue an AP block read.
- *
- * @param dap The DAP used for reading.
- * @param reg The number of the AP register being read.
- * @param blocksize The number of the AP register being read.
- * @param buffer Pointer saying where to store the data
- * (in host endianness).
- *
- * @return ERROR_OK for success, else a fault code.
- */
-static inline int dap_queue_ap_read_block(struct adiv5_dap *dap,
-		unsigned reg, unsigned blocksize, uint8_t *buffer)
-{
-	assert(dap->ops != NULL);
-	return dap->ops->queue_ap_read_block(dap, reg, blocksize, buffer);
-}
-
-/**
  * Queue an AP abort operation.  The current AP transaction is aborted,
  * including any update of the transaction counter.  The AP is left in
  * an unknown state (so it must be re-initialized).  For use only after