aboutsummaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
authorSpencer Oliver <spen@spen-soft.co.uk>2012-11-08 16:16:53 +0000
committerSpencer Oliver <spen@spen-soft.co.uk>2012-12-23 21:46:40 +0000
commit69359b1c52233f222bced5784f9f2687e720a633 (patch)
tree07c69a53d189bf5249edb85da6efe4744d2106ac /doc
parent67801c061f2b1cdc597076bf79387f0cc9737a13 (diff)
doc: replace luminary with TI urls's
Change-Id: Ic8a768f5a498e78b96421c6137238593c159fd72 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/970 Tested-by: jenkins
Diffstat (limited to 'doc')
-rw-r--r--doc/openocd.texi10
1 files changed, 5 insertions, 5 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi
index 5d1ef4ad..e38e619d 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -357,13 +357,13 @@ a built-in low cost debug adapter and usb-to-serial solution.
@item @b{signalyzer}
@* See: @url{http://www.signalyzer.com}
@item @b{Stellaris Eval Boards}
-@* See: @url{http://www.luminarymicro.com} - The Stellaris eval boards
+@* See: @url{http://www.ti.com} - The Stellaris eval boards
bundle FT2232-based JTAG and SWD support, which can be used to debug
the Stellaris chips. Using separate JTAG adapters is optional.
These boards can also be used in a "pass through" mode as JTAG adapters
to other target boards, disabling the Stellaris chip.
-@item @b{Luminary ICDI}
-@* See: @url{http://www.luminarymicro.com} - Luminary In-Circuit Debug
+@item @b{TI/Luminary ICDI}
+@* See: @url{http://www.ti.com} - TI/Luminary In-Circuit Debug
Interface (ICDI) Boards are included in Stellaris LM3S9B9x
Evaluation Kits. Like the non-detachable FT2232 support on the other
Stellaris eval boards, they can be used to debug other target boards.
@@ -2489,12 +2489,12 @@ Currently valid layout @var{name} values include:
@item @b{axm0432_jtag} Axiom AXM-0432
@item @b{comstick} Hitex STR9 comstick
@item @b{cortino} Hitex Cortino JTAG interface
-@item @b{evb_lm3s811} Luminary Micro EVB_LM3S811 as a JTAG interface,
+@item @b{evb_lm3s811} TI/Luminary Micro EVB_LM3S811 as a JTAG interface,
either for the local Cortex-M3 (SRST only)
or in a passthrough mode (neither SRST nor TRST)
This layout can not support the SWO trace mechanism, and should be
used only for older boards (before rev C).
-@item @b{luminary_icdi} This layout should be used with most Luminary
+@item @b{luminary_icdi} This layout should be used with most TI/Luminary
eval boards, including Rev C LM3S811 eval boards and the eponymous
ICDI boards, to debug either the local Cortex-M3 or in passthrough mode
to debug some other target. It can support the SWO trace mechanism.