aboutsummaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
authorMike Dunn <mikedunn@newsguy.com>2010-09-19 15:30:59 -0700
committerØyvind Harboe <oyvind.harboe@zylin.com>2010-09-20 09:21:13 +0200
commit103c1f9525436892b610b37d5efc4f2635f5a832 (patch)
tree4e8622f91b48062f64769a755249686911711c28 /doc
parentebfb2f4f3715f264ae4474c1b2e78812d1625cdc (diff)
xscale: some wp detail added to user manual
Hi everyone (again), Watchpoints on xscale are quirky, so I thought a little explanation in the user's manual was warranted. Comments gratefully received. Last one, Øyvind :-) Thanks, Mike Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
Diffstat (limited to 'doc')
-rw-r--r--doc/openocd.texi9
1 files changed, 9 insertions, 0 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi
index bc026b90..230e47c9 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -6390,6 +6390,15 @@ the @code{xscale debug_handler} command. The allowed locations for the
debug handler are either (0x800 - 0x1fef800) or (0xfe000800 -
0xfffff800). The default value is 0xfe000800.
+XScale has resources to support two hardware breakpoints and two
+watchpoints. However, the following restrictions on watchpoint
+functionality apply: (1) the value and mask arguments to the @code{wp}
+command are not supported, (2) the watchpoint length must be a
+power of two and not less than four, and can not be greater than the
+watchpoint address, and (3) a watchpoint with a length greater than
+four consumes all the watchpoint hardware resources. This means that
+at any one time, you can have enabled either two watchpoints with a
+length of four, or one watchpoint with a length greater than four.
These commands are available to XScale based CPUs,
which are implementations of the ARMv5TE architecture.