diff options
| author | Esben Haabendal <esben@haabendal.dk> | 2015-11-27 09:13:36 +0100 |
|---|---|---|
| committer | Paul Fertser <fercerpav@gmail.com> | 2016-06-23 07:39:57 +0100 |
| commit | 12ff09f7f27a707fe42226262f55b8ce8351cbf9 (patch) | |
| tree | b8c6b35881a40842ac91e0482a5f45605f9adff6 /doc | |
| parent | f906c65fed5f3f2df54c6aaf2ea28d9742d44db4 (diff) | |
cfi: Add support for strangely endianness broken SoC implementations
This adds the 'data_swap' parameter to the CFI driver, which enables
swapping of data bytes when writing/programming words to the flash.
Note, that this specifically means that bytes are not swapped when
writing command words to the flash chip. Unless you are using the SAP
in an LS102x chip to program an attached 16-bit NOR flash, you hopefully
do not need this!
Change-Id: I1e6f7169da36f373c880d1756d9c21c9957acc50
Signed-off-by: Esben Haabendal <esben@haabendal.dk>
Reviewed-on: http://openocd.zylin.com/3109
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/openocd.texi | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi index 30a2a461..94f1f315 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -4819,6 +4819,8 @@ The CFI driver can accept the following optional parameters, in any order: like AM29LV010 and similar types. @item @var{x16_as_x8} ... when a 16-bit flash is hooked up to an 8-bit bus. @item @var{bus_swap} ... when data bytes in a 16-bit flash needs to be swapped. +@item @var{data_swap} ... when data bytes in a 16-bit flash needs to be +swapped when writing data values (ie. not CFI commands). @end itemize To configure two adjacent banks of 16 MBytes each, both sixteen bits (two bytes) |