diff options
author | Mathias K <kesmtp@freenet.de> | 2013-11-10 09:13:53 +0100 |
---|---|---|
committer | Spencer Oliver <spen@spen-soft.co.uk> | 2013-12-22 20:24:56 +0000 |
commit | 963214c83dc6273e8868e146dbe96c9dddff17dc (patch) | |
tree | 687ed40b01e91c18c12289a53ae02d60a320a278 /doc | |
parent | 1ab86419d72dd90dbbde028263582346fa1e9dd1 (diff) |
stlink: remove stlink_api command
Remove stlink_api command.
Change-Id: I8f7885d3756fec462f9ebbee2ed285a98a51366c
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/1760
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Diffstat (limited to 'doc')
-rw-r--r-- | doc/openocd.texi | 4 |
1 files changed, 0 insertions, 4 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi index 5f2b89ed..7558eb8b 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -3041,10 +3041,6 @@ Specifies the adapter layout to use. The vendor ID and product ID of the device. @end deffn -@deffn {Config Command} {stlink_api} api_level -Manually sets the stlink api used, valid options are 1 or 2. (@b{STLINK Only}). -@end deffn - @deffn {Config Command} {trace} source_clock_hz [output_file_path] Enable SWO tracing (if supported). The source clock rate for the trace port must be specified, this is typically the CPU clock rate. If |