diff options
| author | Spencer Oliver <spen@spen-soft.co.uk> | 2012-11-08 16:16:53 +0000 |
|---|---|---|
| committer | Spencer Oliver <spen@spen-soft.co.uk> | 2012-12-23 21:46:40 +0000 |
| commit | 69359b1c52233f222bced5784f9f2687e720a633 (patch) | |
| tree | 07c69a53d189bf5249edb85da6efe4744d2106ac /doc | |
| parent | 67801c061f2b1cdc597076bf79387f0cc9737a13 (diff) | |
doc: replace luminary with TI urls's
Change-Id: Ic8a768f5a498e78b96421c6137238593c159fd72
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/970
Tested-by: jenkins
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/openocd.texi | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi index 5d1ef4ad..e38e619d 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -357,13 +357,13 @@ a built-in low cost debug adapter and usb-to-serial solution. @item @b{signalyzer} @* See: @url{http://www.signalyzer.com} @item @b{Stellaris Eval Boards} -@* See: @url{http://www.luminarymicro.com} - The Stellaris eval boards +@* See: @url{http://www.ti.com} - The Stellaris eval boards bundle FT2232-based JTAG and SWD support, which can be used to debug the Stellaris chips. Using separate JTAG adapters is optional. These boards can also be used in a "pass through" mode as JTAG adapters to other target boards, disabling the Stellaris chip. -@item @b{Luminary ICDI} -@* See: @url{http://www.luminarymicro.com} - Luminary In-Circuit Debug +@item @b{TI/Luminary ICDI} +@* See: @url{http://www.ti.com} - TI/Luminary In-Circuit Debug Interface (ICDI) Boards are included in Stellaris LM3S9B9x Evaluation Kits. Like the non-detachable FT2232 support on the other Stellaris eval boards, they can be used to debug other target boards. @@ -2489,12 +2489,12 @@ Currently valid layout @var{name} values include: @item @b{axm0432_jtag} Axiom AXM-0432 @item @b{comstick} Hitex STR9 comstick @item @b{cortino} Hitex Cortino JTAG interface -@item @b{evb_lm3s811} Luminary Micro EVB_LM3S811 as a JTAG interface, +@item @b{evb_lm3s811} TI/Luminary Micro EVB_LM3S811 as a JTAG interface, either for the local Cortex-M3 (SRST only) or in a passthrough mode (neither SRST nor TRST) This layout can not support the SWO trace mechanism, and should be used only for older boards (before rev C). -@item @b{luminary_icdi} This layout should be used with most Luminary +@item @b{luminary_icdi} This layout should be used with most TI/Luminary eval boards, including Rev C LM3S811 eval boards and the eponymous ICDI boards, to debug either the local Cortex-M3 or in passthrough mode to debug some other target. It can support the SWO trace mechanism. |