diff options
author | Paul Fertser <fercerpav@gmail.com> | 2015-02-21 10:55:41 +0300 |
---|---|---|
committer | Paul Fertser <fercerpav@gmail.com> | 2015-03-09 08:58:16 +0000 |
commit | 571db89aa13554d5c5e38e88233927d3149edc3a (patch) | |
tree | 76b5961b8367ca52ed4384ed4b5987f34c21764c /doc/openocd.texi | |
parent | 5aa08f785101b0eb72eabf61fac537fb0e91379f (diff) |
flash/nor/stellaris: allow to recover a locked device that can't be examined
Change-Id: I28536184053e2d1ba906620e728f7fad6ba39f0a
Reported-by: Ed Beroset <beroset@mindspring.com>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2552
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Ed Beroset <beroset@ieee.org>
Diffstat (limited to 'doc/openocd.texi')
-rw-r--r-- | doc/openocd.texi | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi index 9a697e1d..40864373 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -5480,12 +5480,12 @@ standard @command{flash erase_address} command.} flash bank $_FLASHNAME stellaris 0 0 0 0 $_TARGETNAME @end example -@deffn Command {stellaris recover bank_id} -Performs the @emph{Recovering a "Locked" Device} procedure to -restore the flash specified by @var{bank_id} and its associated -nonvolatile registers to their factory default values (erased). -This is the only way to remove flash protection or re-enable -debugging if that capability has been disabled. +@deffn Command {stellaris recover} +Performs the @emph{Recovering a "Locked" Device} procedure to restore +the flash and its associated nonvolatile registers to their factory +default values (erased). This is the only way to remove flash +protection or re-enable debugging if that capability has been +disabled. Note that the final "power cycle the chip" step in this procedure must be performed by hand, since OpenOCD can't do it. |