diff options
author | Uwe Hermann <uwe@hermann-uwe.de> | 2011-10-14 00:21:06 +0200 |
---|---|---|
committer | Spencer Oliver <spen@spen-soft.co.uk> | 2011-10-13 22:29:28 +0000 |
commit | 498662e2e5e89ab7299b2fa54a307c5bfcdcd00e (patch) | |
tree | dd99516b5fcbe9cfd309344bc290ad9f5720e6c1 /doc/openocd.texi | |
parent | d4599b8b3f0c568961d6007e59633456a13a9c18 (diff) |
Add an interface file for DLP Design DLP-USB1232H.
The DLP Design DLP-USB1232H UART/SPI/JTAG module is based on an FTDI FT2232H
chip. Among other things, it can used as JTAG programmer if connected to
the JTAG target properly. I have successfully wired the module to an
Olimex STM32-H103 eval board and flashed a firmware onto that using OpenOCD.
The setup details and schematics are documented at:
http://randomprojects.org/wiki/DLP-USB1232H_and_OpenOCD_based_JTAG_adapter
Change-Id: I5eb9255a61eeece233009bee77d7dc3b5d1afb8b
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/20
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
Diffstat (limited to 'doc/openocd.texi')
-rw-r--r-- | doc/openocd.texi | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi index 960a4c08..37898591 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -372,6 +372,8 @@ Stellaris eval boards, they can be used to debug other target boards. @* Axiom AXM-0432 Link @url{http://www.axman.com} @item @b{cortino} @* Link @url{http://www.hitex.com/index.php?id=cortino} +@item @b{dlp-usb1232h} +@* Link @url{http://www.dlpdesign.com/usb/usb1232h.shtml} @end itemize @section USB-JTAG / Altera USB-Blaster compatibles |