diff options
author | Alex Ray <a@machinaut.com> | 2014-04-03 23:14:37 -0700 |
---|---|---|
committer | Paul Fertser <fercerpav@gmail.com> | 2015-04-24 14:55:16 +0100 |
commit | a1719e004865fb9ca556f693fd8e5c56992bc1de (patch) | |
tree | da2d0899fde32dda3bf99ca30a63a94d129975b5 | |
parent | 528197ba2cf2b208efa4d5c8465a9044567e8d69 (diff) |
TI TMS570 USB Kit board config
Split TMS570 target into LS31/LS21 and LS20/LS10 targets.
Board for the TMS570LS20SUSB Kit, which uses the TMS570 Cortex-R4 MCU from TI.
Tested attaching.
Change-Id: I1a69ac1ed800d0d6b7f9860c19cbd149e3e47620
Signed-off-by: Alex Ray <a@machinaut.com>
Reviewed-on: http://openocd.zylin.com/2089
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
-rw-r--r-- | tcl/board/ti_tmdx570ls20susb.cfg | 15 | ||||
-rw-r--r-- | tcl/target/ti_tms570.cfg | 6 | ||||
-rw-r--r-- | tcl/target/ti_tms570ls20xxx.cfg | 6 | ||||
-rw-r--r-- | tcl/target/ti_tms570ls3137.cfg | 5 |
4 files changed, 24 insertions, 8 deletions
diff --git a/tcl/board/ti_tmdx570ls20susb.cfg b/tcl/board/ti_tmdx570ls20susb.cfg index 2601d21d..87cab269 100644 --- a/tcl/board/ti_tmdx570ls20susb.cfg +++ b/tcl/board/ti_tmdx570ls20susb.cfg @@ -1,9 +1,16 @@ -adapter_khz 1500 +# TMS570 Microcontroller USB Kit +# http://www.ti.com/tool/TMDX570LS20SUSB +# Board uses a FT2232H to emulate an XDS100v2 JTAG debugger +# TODO: board also supports an SCI UART on the 2232's B Bus source [find interface/ftdi/xds100v2.cfg] -set DAP_TAPID 0x0b7b302f -set JRC_TAPID $DAP_TAPID -source [find target/ti_tms570.cfg] +# Processor is TMS570LS20216 +source [find target/ti_tms570ls20xxx.cfg] reset_config trst_only + +# xds100v2 config says add this to the end +init +ftdi_set_signal PWR_RST 1 +jtag arp_init diff --git a/tcl/target/ti_tms570.cfg b/tcl/target/ti_tms570.cfg index 014c76c1..b8f9287f 100644 --- a/tcl/target/ti_tms570.cfg +++ b/tcl/target/ti_tms570.cfg @@ -16,19 +16,17 @@ if { [info exists ENDIAN] } { source [find target/icepick.cfg] # Main DAP +# DAP_TAPID should be set before source-ing this file if { [info exists DAP_TAPID] } { set _DAP_TAPID $DAP_TAPID -} else { - set _DAP_TAPID 0x0B8A002F } jtag newtap $_CHIPNAME dap -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_DAP_TAPID -disable jtag configure $_CHIPNAME.dap -event tap-enable "icepick_c_tapenable $_CHIPNAME.jrc 0" # ICEpick-C (JTAG route controller) +# JRC_TAPID should be set before source-ing this file if { [info exists JRC_TAPID] } { set _JRC_TAPID $JRC_TAPID -} else { - set _JRC_TAPID 0x0B8A002F } jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f \ -expected-id $_JRC_TAPID -ignore-version diff --git a/tcl/target/ti_tms570ls20xxx.cfg b/tcl/target/ti_tms570ls20xxx.cfg new file mode 100644 index 00000000..ef45b7a5 --- /dev/null +++ b/tcl/target/ti_tms570ls20xxx.cfg @@ -0,0 +1,6 @@ +# TMS570LS20216, TMS570LS20206, TMS570LS10216 +# TMS570LS10206, TMS570LS10116, TMS570LS10106 +set DAP_TAPID 0x0B7B302F +set JRC_TAPID 0x0B7B302F + +source [find target/ti_tms570.cfg] diff --git a/tcl/target/ti_tms570ls3137.cfg b/tcl/target/ti_tms570ls3137.cfg new file mode 100644 index 00000000..f2918035 --- /dev/null +++ b/tcl/target/ti_tms570ls3137.cfg @@ -0,0 +1,5 @@ +# TMS570LS3137 +set DAP_TAPID 0x0B8A002F +set JRC_TAPID 0x0B8A002F + +source [find target/ti_tms570.cfg] |