aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorzwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>2009-06-18 00:29:39 +0000
committerzwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>2009-06-18 00:29:39 +0000
commit6f4d876c88122b7c1a97441f68eea37993b88c5f (patch)
treebd69bb14553687842ad3910d43f6972c31675cf2
parent8ab9b6d39eb2f17e7367b48855736ae73ad8360f (diff)
David Brownell <david-b@pacbell.net>:
Various bits of cleanup, mostly to match the style hints I just got around to writing up. - Various @cindex improvements - Cross reference the command line options in a few spots, notably for @command{debug_level} - Clean the config file guidelines a bit: * They're for all users, not just integrators * Reference the interface config chapter * Don't emphasize command line usage here * Tweak board and target config introductory text Plus two minor bits of cleanup: remove most date references, and refer to the reader as "you" not "the user". git-svn-id: svn://svn.berlios.de/openocd/trunk@2271 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-rw-r--r--doc/openocd.texi178
1 files changed, 101 insertions, 77 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi
index 3a396b1e..0a89d3f0 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -104,6 +104,8 @@ supported by a diverse community of software and hardware developers from
around the world.
@section What is OpenOCD?
+@cindex TAP
+@cindex JTAG
The Open On-Chip Debugger (OpenOCD) aims to provide debugging,
in-system programming and boundary-scan testing for embedded target
@@ -356,7 +358,11 @@ give the directory where the Win32 FTDICHIP.COM 'CDM' driver zip file was unpack
@option{--with-ftd2xx-linux-tardir=PATH} - If using FTDICHIP.COM ft2232c driver
on Linux, give the directory where the Linux driver's TAR.GZ file was unpacked.
@item
-@option{--with-ftd2xx-lib=shared|static} - Linux only. Default: static. Specifies how the FTDICHIP.COM libftd2xx driver should be linked. Note: 'static' only works in conjunction with @option{--with-ftd2xx-linux-tardir}. The 'shared' value is supported (12/26/2008), however you must manually install the required header files and shared libraries in an appropriate place. This uses ``libusb'' internally.
+@option{--with-ftd2xx-lib=shared|static} - Linux only. Default: static.
+Specifies how the FTDICHIP.COM libftd2xx driver should be linked.
+Note: 'static' only works in conjunction with @option{--with-ftd2xx-linux-tardir}.
+The 'shared' value is supported, however you must manually install the required
+header files and shared libraries in an appropriate place.
@item
@option{--enable-presto_libftdi} - Enable building support for ASIX Presto programmer using the libftdi driver.
@item
@@ -398,8 +404,9 @@ not available for all operating systems used with OpenOCD.
The FTDICHIP drivers come as either a (win32) ZIP file, or a (Linux)
TAR.GZ file. You must unpack them ``some where'' convient. As of this
-writing (12/26/2008) FTDICHIP does not supply means to install these
-files ``in an appropriate place'' As a result, there are two
+writing FTDICHIP does not supply means to install these
+files ``in an appropriate place''.
+As a result, there are two
``./configure'' options that help.
Below is an example build process:
@@ -476,7 +483,7 @@ openocd @option{-v} is executed.
@cindex zy1000
@cindex printer port
@cindex USB Adapter
-@cindex rtck
+@cindex RTCK
Defined: @b{dongle}: A small device that plugins into a computer and serves as
an adapter .... [snip]
@@ -518,8 +525,6 @@ See: @url{http://www.ftdichip.com} for more information.
In summer 2009, USB high speed (480 Mbps) versions of these FTDI
chips are starting to become available in JTAG adapters.
-As of 28/Nov/2008, the following are supported:
-
@itemize @bullet
@item @b{usbjtag}
@* Link @url{http://www.hs-augsburg.de/~hhoegl/proj/usbjtag/usbjtag.html}
@@ -654,11 +659,9 @@ FlashLINK JTAG programing cable for PSD and uPSD}
@node Running
@chapter Running
-@cindex running OpenOCD
-@cindex --configfile
-@cindex --debug_level
-@cindex --logfile
-@cindex --search
+@cindex command line options
+@cindex logfile
+@cindex directory search
The @option{--help} option shows:
@verbatim
@@ -696,8 +699,8 @@ itself), use the @option{-d} command line switch. This sets the
@option{debug_level} to "3", outputting the most information,
including debug messages. The default setting is "2", outputting only
informational messages, warnings and errors. You can also change this
-setting from within a telnet or gdb session using @option{debug_level
-<n>} @xref{debug_level}.
+setting from within a telnet or gdb session using @command{debug_level
+<n>} (@pxref{debug_level}).
You can redirect all output from the daemon to a file using the
@option{-l <logfile>} switch.
@@ -851,8 +854,9 @@ file, including basic configuration plus any TCL procedures
to simplify your work.
@section User Config Files
-@cindex config file
+@cindex config file, user
@cindex user config file
+@cindex config file, overview
A user configuration file ties together all the parts of a project
in one place.
@@ -862,8 +866,10 @@ One of the following will match your situation best:
@item Ideally almost everything comes from configuration files
provided by someone else.
For example, OpenOCD distributes a @file{scripts} directory
-(probably in @file{/usr/share/openocd/scripts} on Linux);
-board and tool vendors can provide these too.
+(probably in @file{/usr/share/openocd/scripts} on Linux).
+Board and tool vendors can provide these too, as can individual
+user sites; the @option{-s} command line option lets you say
+where to find these files. (@xref{Running}.)
The AT91SAM7X256 example above works this way.
Three main types of non-user configuration file each have their
@@ -1003,15 +1009,12 @@ involving considerably more than just a three stage bootloader.
@node Config File Guidelines
@chapter Config File Guidelines
-This section/chapter is aimed at developers and integrators of
-OpenOCD. These are guidelines for creating new boards and new target
-configurations as of 28/Nov/2008.
+This chapter is aimed at any user who needs to write a config file,
+including developers and integrators of OpenOCD and any user who
+needs to get a new board working smoothly.
+It provides guidelines for creating those files.
-However, you, the user of OpenOCD, should be somewhat familiar with
-this section as it should help explain some of the internals of what
-you might be looking at.
-
-The user should find the following directories under @t{$(INSTALLDIR)/lib/openocd} :
+You should find the following directories under @t{$(INSTALLDIR)/lib/openocd} :
@itemize @bullet
@item @b{interface}
@@ -1033,43 +1036,43 @@ When a chip has multiple TAPs (maybe it has both ARM and DSP cores),
the target config file defines all of them.
@end itemize
-@b{If needed...} The user in their ``openocd.cfg'' file or the board
-file might override a specific feature in any of the above files by
-setting a variable or two before sourcing the target file. Or adding
-various commands specific to their situation.
+The @file{openocd.cfg} user config
+file may override features in any of the above files by
+setting variables before sourcing the target file, or by adding
+commands specific to their situation.
@section Interface Config Files
-@cindex config file
-The user should be able to source one of these files via a command like this:
+The user config file
+should be able to source one of these files via a command like this:
@example
- source [find interface/FOOBAR.cfg]
-Or:
- openocd -f interface/FOOBAR.cfg
+source [find interface/FOOBAR.cfg]
@end example
A preconfigured interface file should exist for every interface in use
today, that said, perhaps some interfaces have only been used by the
sole developer who created it.
+A separate chapter gives information about how to set these up.
+@xref{Interface - Dongle Configuration}.
+Read the OpenOCD source code if you have a new kind of hardware interface
+and need to provide a driver for it.
+
Interface files should be found in @t{$(INSTALLDIR)/lib/openocd/interface}
@section Board Config Files
-@cindex config file
+@cindex config file, board
+@cindex board config file
-@b{Note: BOARD directory NEW as of 28/nov/2008}
-
-The user should be able to source one of these files via a command like this:
+The user config file
+should be able to source one of these files via a command like this:
@example
- source [find board/FOOBAR.cfg]
-Or:
- openocd -f board/FOOBAR.cfg
+source [find board/FOOBAR.cfg]
@end example
-
-The board file should contain one or more @t{source [find
+The board config file should contain one or more @command{source [find
target/FOO.cfg]} statements along with any board specific things.
In summary the board files should contain (if present)
@@ -1085,14 +1088,14 @@ In summary the board files should contain (if present)
@end enumerate
@section Target Config Files
-@cindex config file
+@cindex config file, target
+@cindex target config file
-The user should be able to source one of these files via a command like this:
+Board config files should be able to source one or more
+target config files via a command like this:
@example
- source [find target/FOOBAR.cfg]
-Or:
- openocd -f target/FOOBAR.cfg
+source [find target/FOOBAR.cfg]
@end example
In summary the target files should contain
@@ -1100,23 +1103,41 @@ In summary the target files should contain
@enumerate
@item Set defaults
@item Add TAPs to the scan chain
-@item Add CPU targets
+@item Add CPU targets (includes GDB support)
@item CPU/Chip/CPU-Core specific features
@item On-Chip flash
@end enumerate
+As a rule of thumb, a target file sets up only one chip.
+For a microcontroller, that will often include a single TAP,
+which is a CPU needing a GDB target; and its on-chip flash.
+
+More complex chips may include multiple TAPs, and the target
+config file may need to define them all before OpenOCD
+can talk to the chip.
+For example, some phone chips have JTAG scan chains that include
+an ARM core for operating system use, a DSP,
+another ARM core embedded in an image processing engine,
+and other processing engines.
+
@subsection Important variable names
-By default, the end user should never need to set these
-variables. However, if the user needs to override a setting they only
-need to set the variable in a simple way.
+Most boards will have only one instance of a chip.
+However, it should be easy to create a board with more than
+one such chip.
+Accordingly, we encourage some conventions for naming
+variables associated with different TAPs, to promote
+consistency and
+so that board files can override target defaults, and
@itemize @bullet
@item @b{CHIPNAME}
@* This gives a name to the overall chip, and is used as part of the
tap identifier dotted name.
+It's normally provided by the chip manufacturer.
@item @b{ENDIAN}
@* By default little - unless the chip or board is not normally used that way.
+Chips that can't change endianness don't need to use this variable.
@item @b{CPUTAPID}
@* When OpenOCD examines the JTAG chain, it will attempt to identify
every chip. If the @t{-expected-id} is nonzero, OpenOCD attempts
@@ -1142,22 +1163,15 @@ specific to that board and that target.
If the chip has 2 targets, use the names @b{_TARGETNAME0},
@b{_TARGETNAME1}, ... etc.
-@b{Remember:} The ``board file'' may include multiple targets.
-
-At no time should the name ``target0'' (the default target name if
-none was specified) be used. The name ``target0'' is a hard coded name
-- the next target on the board will be some other number.
-In the same way, avoid using target numbers even when they are
-permitted; use the right target name(s) for your board.
-
-The user (or board file) should reasonably be able to:
+@emph{Remember:} The ``board file'' may include multiple targets.
+The user (or board) config file should reasonably be able to:
@example
- source [find target/FOO.cfg]
- $_TARGETNAME configure ... FOO specific parameters
+source [find target/FOO.cfg]
+$_TARGETNAME configure ... FOO specific parameters
- source [find target/BAR.cfg]
- $_TARGETNAME configure ... BAR specific parameters
+source [find target/BAR.cfg]
+$_TARGETNAME configure ... BAR specific parameters
@end example
@end itemize
@@ -1169,7 +1183,7 @@ Thus the rule we follow in OpenOCD is this: Variables that begin with
a leading underscore are temporary in nature, and can be modified and
used at will within a ?TARGET? configuration file.
-@b{EXAMPLE:} The user should be able to do this:
+@b{EXAMPLE:} The user config file should be able to do this:
@example
# Board has 3 chips,
@@ -1359,7 +1373,7 @@ needed. We welcome JIM Tcl improvements, not bloat.
@item @b{Scripts}
@* OpenOCD configuration scripts are JIM Tcl Scripts. OpenOCD's
-command interpreter today (28/nov/2008) is a mixture of (newer)
+command interpreter today is a mixture of (newer)
JIM-Tcl commands, and (older) the orginal command interpreter.
@item @b{Commands}
@@ -1566,6 +1580,9 @@ MMU: disabled, D-Cache: disabled, I-Cache: enabled
@node Interface - Dongle Configuration
@chapter Interface - Dongle Configuration
+@cindex config file, interface
+@cindex interface config file
+
JTAG Adapters/Interfaces/Dongles are normally configured
through commands in an interface configuration
file which is sourced by your @file{openocd.cfg} file, or
@@ -2138,6 +2155,7 @@ which sets up CPUs and exports them as GDB targets,
probes flash memory, performs low-level JTAG operations, and more.
@section Scan Chains
+@cindex scan chain
TAPs are part of a hardware @dfn{scan chain},
which is daisy chain of TAPs.
@@ -2232,6 +2250,7 @@ each TAP's instruction register can also change.
@c (on entry to RESET state).
@section TAP Names
+@cindex dotted name
When TAP objects are declared with @command{jtag newtap},
a @dfn{dotted.name} is created for the TAP, combining the
@@ -2330,6 +2349,8 @@ ID code could appear (for example, multiple versions).
@anchor{Enabling and Disabling TAPs}
@section Enabling and Disabling TAPs
@cindex TAP events
+@cindex JTAG Route Controller
+@cindex jrc
In some systems, a @dfn{JTAG Route Controller} (JRC)
is used to enable and/or disable specific JTAG TAPs.
@@ -2422,6 +2443,8 @@ We'll start by looking at how to examine the targets you have,
then look at how to add one more target and how to configure it.
@section Target List
+@cindex target, current
+@cindex target, list
All targets that have been set up are part of a list,
where each member has a name.
@@ -2498,6 +2521,9 @@ only relevant on boards which have more than one target.
@end deffn
@section Target CPU Types and Variants
+@cindex target type
+@cindex CPU type
+@cindex CPU variant
Each target has a @dfn{CPU type}, as shown in the output of
the @command{targets} command. You need to specify that type
@@ -2979,12 +3005,6 @@ used. (SPI flash must also be copied to memory before use.)
However, the documentation also uses ``flash'' as a generic term;
for example, ``Put flash configuration in board-specific files''.
-@quotation Note
-As of 28-nov-2008 OpenOCD does not know how to program a SPI
-flash that a micro may boot from. Perhaps you, the reader, would like to
-contribute support for this.
-@end quotation
-
Flash Steps:
@enumerate
@item Configure via the command @command{flash bank}
@@ -4012,8 +4032,12 @@ If @var{n} (from 0..3) is provided, then set it to that level.
This affects the kind of messages sent to the server log.
Level 0 is error messages only;
level 1 adds warnings;
-level 2 (the default) adds informational messages;
+level 2 adds informational messages;
and level 3 adds debugging messages.
+The default is level 2, but that can be overridden on
+the command line along with the location of that log
+file (which is normally the server's standard output).
+@xref{Running}.
@end deffn
@deffn Command fast (@option{enable}|@option{disable})
@@ -4057,7 +4081,7 @@ the initial log output channel is stderr.
In this section ``target'' refers to a CPU configured as
shown earlier (@pxref{CPU Configuration}).
These commands, like many, implicitly refer to
-a @dfn{current target} which is used to perform the
+a current target which is used to perform the
various operations. The current target may be changed
by using @command{targets} command with the name of the
target which should become current.
@@ -5743,8 +5767,8 @@ is a string}
parsed, but are NOT expanded or executed. @{Curly-Braces@} are like
'single-quote' operators in BASH shell scripts, with the added
feature: @{curly-braces@} can be nested, single quotes can not. @{@{@{this is
-nested 3 times@}@}@} NOTE: [date] is perhaps a bad example, as of
-28/nov/2008, Jim/OpenOCD does not have a date command.
+nested 3 times@}@}@} NOTE: [date] is a bad example;
+at this writing, Jim/OpenOCD does not have a date command.
@end itemize
@section Consequences of Rule 1/2/3/4
@@ -5967,7 +5991,7 @@ $VARS and [square-brackets] are expanded later, when the EVENT occurs,
and the text is evaluated. In case #4, they are replaced before the
``Target Object Command'' is executed. This occurs at the same time
$_TARGETNAME is replaced. In case #4 the date will never
-change. @{BTW: [date] is perhaps a bad example, as of 28/nov/2008,
+change. @{BTW: [date] is a bad example; at this writing,
Jim/OpenOCD does not have a date command@}
@end enumerate
@subsection Global Variables