OpenOCD/doc, branch mips-hack-upstream

Support for STM32F722, F723, F413 and F423

2017-08-10T08:35:47Z

IDs for STM32F722, F723, F413 and F423 added, handling of PCROP for F722/723 and additional nWPRT bits for F413/423 implemented. The additional protection bit positions for F413/423 conflict with other options bits for the F7xx variants, additionally the last two sectors share a common bit. Protection for F413 and F767/777 now use protection blocks rather sectors for dealing with protections bits. Checking for halted state in 'lock' and 'unlock' removed: When PCROP is activated in F723, halted state is not detected properly, but lock/unlock sequence is required to disable PCROP. Tested with STM32F723E-Disco, STM32F413ZH-Nucleo. Change-Id: Ie6ddab47a9ae8461087d369b4f289b7f9d1e031c Signed-off-by: Andreas Bolsch Reviewed-on: http://openocd.zylin.com/4045 Tested-by: jenkins Reviewed-by: Tomas Vanek Reviewed-by: Paul Fertser

log: Add a new debug level (4) for verbose I/O debug

2017-08-10T08:29:06Z

Change ftdi SWD driver and CMSIS-DAP to use it instead of LOG_DEBUG(). Change-Id: I17ba3de2086c7159209db61fba3faf067dfc5023 Signed-off-by: Andreas Fritiofson Reviewed-on: http://openocd.zylin.com/3805 Tested-by: jenkins Reviewed-by: Tomas Vanek

flash/nor/tcl: Make read_bank parameters optional

2017-06-17T11:45:56Z

Make 'offset' and 'length' parameters optional, if both are omitted simply read the whole flash bank. Additionally, check if the 'offset' and 'length' arguments are out of bounds of the flash bank. Change-Id: Ib9c1b0538a2c78ebcf702e2da11468dff407f8ff Signed-off-by: Marc Schink Reviewed-on: http://openocd.zylin.com/3862 Tested-by: jenkins Reviewed-by: Tomas Vanek

flash/nor/tcl: Make write_bank parameter optional

2017-06-17T11:44:25Z

Make the 'offset' parameter optional, if omitted simply start at the beginning of the flash bank. Additionally, check if the argument is out of bounds of the flash bank. Change-Id: I8e9632b539ad9e83211e1ac6a06da4c8109cbc60 Signed-off-by: Marc Schink Reviewed-on: http://openocd.zylin.com/3860 Tested-by: jenkins Reviewed-by: Tomas Vanek

flash Kinetis: add KL28 device

2017-06-17T11:02:07Z

This device differs a lot from others in KL series. Unfortunately the System Integration Module, where device identification resides, moved to a new address so probe now have to try both addresses of SIM_SDID. Introduce a new bank creation option: -sim-base to ensure error free probe. WDOG32 is slightly different from KE1x and on different address. System Mode Controler changed layout to word aligned. Change-Id: I2c9dca0c4ad4228fcc941d6078d15f5e394833ff Signed-off-by: Tomas Vanek Reviewed-on: http://openocd.zylin.com/4059 Tested-by: jenkins Reviewed-by: Joakim Nohlgård Reviewed-by: Freddie Chopin

flash Kinetis: implement automatic bank creation based on device probe

2017-06-17T11:01:45Z

Kinetis flash driver services huge number of MCU types. They have one, two or four flash banks with option of FlexNVM. It would require ~36 config files just for Kx series, more for KLx, KVx and KE1x. The change implements alternative approach: - configuration file creates just one pflash bank (common for all devices) - when a device is probed, additional pflash or flexnvm banks are created based on flash layout of the connected MCU - created banks have names with optional numbering e.g. kx.pflash0 kx.pflash1 kx.flexnvm0 kx.flexnvm1 - the first bank gets renamed if numbering is used Automatic bank creation is enabled by tcl command 'kinetis create_banks'. Used solution has a drawback: other banks than pflash0 are not accessible until pflash0 is probed. Fortunately gdb attach and standard programming accesses banks in right sequence. Change-Id: I5b9037cbefdb8a4176b7715fbcc3af4da4c1ab60 Signed-off-by: Tomas Vanek Reviewed-on: http://openocd.zylin.com/3925 Tested-by: jenkins Reviewed-by: Joakim Nohlgård Reviewed-by: Freddie Chopin

tcl/target: make sure kex.cfg is not used for Kinetis KE1x families

2017-06-17T11:00:01Z

Config file renamed to ke0x.cfg and a notice added to texi. While on ke0x.cfg CPUTAPID setting fixed: device has SWD port only, no JTAG. Removed per device configs as they set CHIPNAME and nothing more. Let's use reasonably universal chip name 'ke' set in family config. Change-Id: I313db87a59f25f968eb3c27df155780b67becee8 Signed-off-by: Tomas Vanek Reviewed-on: http://openocd.zylin.com/3897 Tested-by: jenkins Reviewed-by: Ivan Meleca Reviewed-by: Joakim Nohlgård Reviewed-by: Freddie Chopin

flash Kinetis: add KE1xZ and KE1xF families

2017-06-17T10:59:36Z

The new Kinetis KE1x families use FTFE flash controller unlike KE0x. Also SDID coding corresponds to new K, KL and KV families. That's why KE1x is handled by kinetis driver instead of kinetis_ke Change-Id: Ibb73e28e41dfbb086e761e1f006b089825dab854 Signed-off-by: Tomas Vanek Reviewed-on: http://openocd.zylin.com/3896 Tested-by: jenkins Reviewed-by: Joakim Nohlgård Reviewed-by: Freddie Chopin

flash: Add support for Atheros (ath79) SPI interface

2017-05-31T07:18:29Z

Supported SoCs: AR71xx, AR724x, AR91xx, AR93xx, QCA9558 Extended and revised version of my original patch submitted by Dmytro here: http://openocd.zylin.com/#/c/3390 This driver is using pure SPI mode, so the flash base address is not used except some flash commands (e.g. "flash program") need it to distinguish the banks. Example config with all 3 chip selects: flash bank flash0 ath79 0 0 0 0 $_TARGETNAME cs0 flash bank flash1 ath79 0x10000000 0 0 0 $_TARGETNAME cs1 flash bank flash2 ath79 0x20000000 0 0 0 $_TARGETNAME cs2 Example usage: > flash probe flash0 Found flash device 'win w25q128fv' (ID 0x001840ef) flash 'ath79' found at 0x00000000 > flash probe flash1 No SPI flash found > flash probe flash2 No SPI flash found > flash banks > flash read_bank flash0 /tmp/test.bin 0x00000000 0x1000 reading 4096 bytes from flash @0x00000000 wrote 4096 bytes to file /tmp/test.bin from flash bank 0 at offset 0x00000000 in 28.688066s (0.139 KiB/s) Change-Id: I5feb697722c07e83a9c1b361a9db7b06bc699aa8 Signed-off-by: Tobias Diedrich Reviewed-on: http://openocd.zylin.com/3612 Tested-by: jenkins Reviewed-by: Dmytro Reviewed-by: Paul Fertser

imx_gpio: add mmap based jtag interface for IMX processors

2017-05-31T07:16:17Z

For some targets (like nrf51) sysfs driver is too slow. This patch implements memory maped driver for IMX processors. Mostly based on bcm2835gpio. Tested on imx6ul CPU. However, it should work on any NXP IMX CPU. Change-Id: Idace4c98181c6e9c64dd158bfa52631204b5c4a7 Signed-off-by: Grzegorz Kostka Reviewed-on: http://openocd.zylin.com/4106 Tested-by: jenkins Reviewed-by: Paul Fertser