Age | Commit message (Collapse) | Author |
|
Previously, even when a pre-increment load or store was generated,
we often needed to keep a copy of the original base register for use
with other offsets. If all of these offsets are constants (including
the offset which was combined into the addressing mode), then this is
clearly unnecessary. This change adjusts these other offsets to use the
new incremented address.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174746 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Aside from the question of whether we report a warning or an error when we
can't satisfy a requested stack object alignment, the current implementation
of this is not good. We're not providing any source location in the diagnostics
and the current warning is not connected to any warning group so you can't
control it. We could improve the source location somewhat, but we can do a
much better job if this check is implemented in the front-end, so let's do that
instead. <rdar://problem/13127907>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174741 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Thanks to help from Nadav and Hal, I have a more reasonable (and even
correct!) approach. This specifically penalizes the insertelement
and extractelement operations for the performance hit that will occur
on PowerPC processors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174725 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
isn't using the default calling convention. However, if the transformation is
from a call to inline IR, then the calling convention doesn't matter.
rdar://13157990
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174724 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Adds a function to target transform info to query for the cost of address
computation. The cost model analysis pass now also queries this interface.
The code in LoopVectorize adds the cost of address computation as part of the
memory instruction cost calculation. Only there, we know whether the instruction
will be scalarized or not.
Increase the penality for inserting in to D registers on swift. This becomes
necessary because we now always assume that address computation has a cost and
three is a closer value to the architecture.
radar://13097204
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174713 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
and provide build instructions
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174711 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
allowed size for the instruction. This code uses RegScavenger to fix this.
We sometimes need 2 registers for Mips16 so we must handle things
differently than how register scavenger is normally used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174696 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
included."
This reverts commit 3854a5d90fee52af1065edbed34521fff6cdc18d.
This causes a clang unit test to hang: vtable-available-externally.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174692 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174675 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Change the
original JALR instruction with one register operand to be a pseudo-instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174657 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174650 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174639 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Vector selects are cheap on NEON. They get lowered to a vbsl instruction.
radar://13158753
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174631 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
These instructions compare two floating point values and return an
integer true (-1) or false (0) value.
When compiling code generated by the Mesa GLSL frontend, the SET*_DX10
instructions save us four instructions for most branch decisions that
use floating-point comparisons.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174609 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
All of the le and lt variants are unsupported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174608 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174607 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174591 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174588 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
For example, when we are doing mips16 hard float or soft float.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174583 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174580 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174571 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174569 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
platforms that are known to be missing them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174564 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
intrinsics, including ones on half types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174555 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174553 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
file was generated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174551 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The test is a binary placed in test/DebugInfo/Inputs, with a source C
file used for reference/reproducing. The source's first line is a clang
build command for reproducing the binary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174543 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
account. Atoms use LEA for updating SP in prologs/epilogs, and the
exact LEA opcode depends on the data model.
Also reapplying the test case which was added and then reverted
(because of Atom failures), this time specifying explicitly the CPU in
addition to the triple. The test case now checks all variations (data
mode, cpu Atom vs. Core).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174542 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
flag is in use. This flag is supposed to affect horizontal whitespaces only.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174541 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Weakly defined symbols should evaluate to 0 if they're undefined at
link-time. This is impossible to do with the usual address generation
patterns, so we should use a literal pool entry to materlialise the
address.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174518 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
These instructions are a late addition to the architecture, and may
yet end up behind an optional attribute, but for now they're available
at all times.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174496 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This adds hints to the various "prfm" instructions so that they can
affect the instruction cache as well as the data cache.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174495 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
to move the stack pointer in prologs/epilogs. I will fix the test and add it
back later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174484 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Failure: undefined symbol 'Lline_table_start0'.
Root-cause: we use a symbol subtraction to calculate at_stmt_list, but
the line table entries are not dumped in the assembly.
Fix: use zero instead of a symbol subtraction for Compile Unit 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174479 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174464 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
We generate one line table for each compilation unit in the object file.
Reviewed by Eric and Kevin.
rdar://problem/13067005
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174445 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
is a vararg function.
The original code was examining flag OutputArg::IsFixed to determine whether
CC_MipsN_VarArg or CC_MipsN should be called. This is not correct, since this
flag is often set to false when the function being analyzed is a non-variadic
function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174442 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174438 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174433 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
differentiate between the alignment of the
base point of a load, and the overall alignment of the load. This caused infinite loops in DAG combine with the
original application of this patch.
ORIGINAL COMMIT LOG:
When the target-independent DAGCombiner inferred a higher alignment for a load,
it would replace the load with one with the higher alignment. However, it did
not place the new load in the worklist, which prevented later DAG combines in
the same phase (for example, target-specific combines) from ever seeing it.
This patch corrects that oversight, and updates some tests whose output changed
due to slightly different DAGCombine outputs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174431 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Found by running instcombine on a fabricated test case for the constant folder.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174430 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
zext( set[ne,eq,gt,ugt] (...) ) type of dag patterns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174429 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This was introduced in r173293.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174424 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174419 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
edge is critical, then split it so we can insert the store.
rdar://13126179
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174418 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174412 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This was fixed by r174402.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174405 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Currently, when a fragment is relaxed, its size is modified, but its
offset is not (it gets laid out as a side effect of checking whether
it needs relaxation), then all subsequent fragments are invalidated
because their offsets need to change. When bundling is enabled,
relaxed fragments need to get laid out again, because the increase in
size may push it over a bundle boundary. So instead of only
invalidating subsequent fragments, also invalidate the fragment that
gets relaxed, which causes it to get laid out again.
This patch also fixes some trailing whitespace and fixes the
bundling-related debug output of MCFragments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174401 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174393 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Emitting the function name allows us to check for it in the FileCheck
tests so we can make sure FileCheck is checking the output of the
correct function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174392 91177308-0d34-0410-b5e6-96231b3b80d8
|