| Age | Commit message (Collapse) | Author |
|
moved it to retain-block-escape-analysis.ll.
*NOTE* I verified that the original bug behind
dont-infinite-loop-during-block-escape-analysis.ll occurs when using opt on
retain-block-escape-analysis.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177240 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This test makes sure that the ObjCARC escape analysis looks at the uses of
instructions which copy the block pointer value by checking all four cases where
that can occur.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177232 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Listing all of the attributes for the callee of a call/invoke instruction is way
too much and makes the IR unreadable. Use references to attributes instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175877 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
function attributes.
This makes the LLVM assembly look better. E.g.:
define void @foo() #0 { ret void }
attributes #0 = { nounwind noinline ssp }
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175605 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
ModuleID
This is done to avoid odd test failures, like the one fixed in r171243.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173163 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
allows for gvn to perform certain optimizations. Thus the runline should
only contain -objc-arc-aa, not the full -objc-arc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173126 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172656 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172369 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
2x blocks each assigned a value via a phi-node causing each to depend on the other.
A test case is provided as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172368 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
=> objc_autorelease but were not updating the InstructionClass to IC_Autorelease.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172288 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
not be placed into an autorelease pool.
The reason that this occurs is that tail calling objc_autorelease eventually
tail calls -[NSObject autorelease] which supports fast autorelease. This can
cause us to violate the semantic gaurantees of __autoreleasing variables that
assignment to an __autoreleasing variables always yields an object that is
placed into the innermost autorelease pool.
The fix included in this patch works by:
1. In the peephole optimization function OptimizeIndividualFunctions, always
remove tail call from objc_autorelease.
2. Whenever we convert to/from an objc_autorelease, set/unset the tail call
keyword as appropriate.
*NOTE* I also handled the case where objc_autorelease is converted in
OptimizeReturns to an autoreleaseRV which still violates the ARC semantics. I
will be removing that in a later patch and I wanted to make sure that the tree
is in a consistent state vis-a-vis ARC always.
Additionally some test cases are provided and all tests that have tail call marked
objc_autorelease keywords have been modified so that tail call has been removed.
*NOTE* One test fails due to a separate bug that I am going to commit soon. Thus
I marked the check line TMP: instead of CHECK: so make check does not fail.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172287 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
ModuleID
This is done to avoid odd test failures, like the one fixed in r171243.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171250 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163739 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
pointers-to-strong-pointers may be in play. These can lead to retains and
releases happening in unstructured ways, foiling the optimizer. This fixes
rdar://12150909.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163180 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
I really need to find a way to automate this, but I can't come up with a regex
that has no false positives while handling tricky cases like custom check
prefixes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162097 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
rdar://11931823.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160637 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
the call correctly even in the case where it is an invoke. This
fixes rdar://11714057.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159157 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
when deleting them. rdar://11434915.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157080 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
end of a basic block if there's no store.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156520 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156471 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
old value after the store but before it is released.
This fixes rdar:/11116986.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156442 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
loop repeatedlt making the same change. This is for rdar://11256239.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155160 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
their argument as "escape" points for objc_retainBlock optimization.
This fixes rdar://11229925.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154682 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
library return value optimization for phi uses. Even when the
phi itself is not dominated, the specific use may be dominated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154647 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
optimizing autorelease calls on phi nodes with null operands.
This fixes rdar://11207070.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154642 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
testcase slightly less trivial. This fixes rdar://11171718.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154118 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
is retaining the return value of an invoke that it immediately follows.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153344 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
same basic block, and it's not safe to insert code in the successor
blocks if the edges are critical edges. Splitting those edges is
possible, but undesirable, especially on the unwind side. Instead,
make the bottom-up code motion to consider invokes to be part of
their successor blocks, rather than part of their parent blocks, so
that it doesn't push code past them and onto the edges. This fixes
PR12307.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153343 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
code.
While here, reduce indentation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152803 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
should be ignored by ARC optimization, don't insert new ARC runtime
calls in the unwind destination.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152748 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
traversal, consider nodes for which the only successors are backedges
which the traversal is ignoring to be exit nodes. This fixes a problem
where the bottom-up traversal was failing to visit split blocks along
split loop backedges. This fixes rdar://10989035.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152421 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
metadata may still unwind, but only in ways that the ARC
optimizer doesn't need to consider. This permits more
aggressive optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150829 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
run with LIT now and now Dejagnu. dg.exp is no longer needed.
Patch reviewed by Daniel Dunbar. It will be followed by additional cleanup patches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150664 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
(but not of) a block pointer do not cause the block pointer to
escape. This fixes rdar://10803830.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150424 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
rdar://10531041.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148490 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
of recognizing them by name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148416 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
autorelease push+pop pairs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148330 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
the optimizer doesn't eliminate objc_retainBlock calls which are needed
for their side effect of copying blocks onto the heap.
This implements rdar://10361249.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148076 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
point to ARC-managed pointers sometimes. This fixes rdar://10551239.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146577 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
instead of 'volatile load', which is archaic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145171 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
tag on objc_retainBlock calls, which indicates that they may be
optimized away. rdar://10211286.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142298 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
possibility that it will span multiple CFG diamonds/triangles which
could have different controlling predicates. rdar://10282956
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142222 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
handle the case where the retain is in a different basic block.
rdar://10210274.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140815 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
objc_retainBlock call is potentially responsible for copying
the block to the heap to extend its lifetime. rdar://10209613.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140814 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
in memory relevant to the optimizer. rdar://10050579.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@139708 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138894 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138242 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138241 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
known-incremented level, because the two concepts can be used
to prove the saftey of a retain+release removal in different
ways.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138016 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
of the instruction.
Note that this change affects the existing non-atomic load and store
instructions; the parser now accepts both forms, and the change is noted
in the release notes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137527 91177308-0d34-0410-b5e6-96231b3b80d8
|