Age | Commit message (Collapse) | Author |
|
ModuleID
This is done to avoid odd test failures, like the one fixed in r171243.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171250 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
ModuleID
This is done to avoid odd test failures, like the one fixed in r171243.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171246 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
call, the call cannot be duplicated - Jump threading, loop unrolling, loop unswitching, and loop rotation are inhibited if they would duplicate the call.
Similarly inlining of the function is inhibited, if that would duplicate the call (in particular inlining is still allowed when there is only one callsite and the function has internal linkage).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170704 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
We update until we hit a fixpoint. This is probably slow but also
slightly simplifies the code. It should also fix the occasional
invalid domtrees observed when building with expensive checking.
I couldn't find a case where this had a measurable slowdown, but
if someone finds a pathological case where it does we may have
to find a cleverer way of updating dominators here.
Thanks to Duncan for the test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163091 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162913 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The old PHI updating code in loop-rotate was replaced with SSAUpdater a while
ago, it has no problems with comples PHIs. What had to be fixed is detecting
whether a loop was already rotated and updating dominators when multiple exits
were present.
This change increases overall code size a bit, mostly due to additional loop
unrolling opportunities. Passes test-suite and selfhost with -verify-dom-info.
Fixes PR7447.
Thanks to Andy for the input on the domtree updating code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162912 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
It began choking since Chandler's r159547, possibly due to improper expression on grep from TclParser to ShParser.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160367 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
another mechanical change accomplished though the power of terrible Perl
scripts.
I have manually switched some "s to 's to make escaping simpler.
While I started this to fix tests that aren't run in all configurations,
the massive number of tests is due to a really frustrating fragility of
our testing infrastructure: things like 'grep -v', 'not grep', and
'expected failures' can mask broken tests all too easily.
Essentially, I'm deeply disturbed that I can change the testsuite so
radically without causing any change in results for most platforms. =/
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159547 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
speculate. Without this, loop rotate (among many other places) would
suddenly stop working in the presence of debug info. I found this
looking at loop rotate, and have augmented its tests with a reduction
out of a very hot loop in yacr2 where failing to do this rotation costs
sometimes more than 10% in runtime performance, perturbing numerous
downstream optimizations.
This should have no impact on performance without debug info, but the
change in performance when debug info is enabled can be extreme. As
a consequence (and this how I got to this yak) any profiling of
performance problems should be treated with deep suspicion -- they may
have been wildly innacurate of debug info was enabled for profiling. =/
Just a heads up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154263 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
run with LIT now and now Dejagnu. dg.exp is no longer needed.
Patch reviewed by Daniel Dunbar. It will be followed by additional cleanup patches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150664 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Patrik Hägglund, with slightly modified test. Issue reported by Patrik Hägglund on llvmdev.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150642 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This folds a simple loop tail into a loop latch. It covers the common (in fortran) case of postincrement loops. It's a "free" way to expose this type of loop to downstream loop optimizations that bail out on non-canonical loops (getLoopLatch is a heavily used check).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150439 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
subsumed by extractvalue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133247 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
syntax and has been long obsolete. As usual, updating the tests is the nasty
part of this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133242 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
indirectbr.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129203 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
that is modified inside loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125529 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123220 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
neccesarily an uncond branch to the header. This fixes
PR8955 (the assertion tripping).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123219 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
to be foldable into an uncond branch. When this happens, we can make a
much simpler CFG for the loop, which is important for nested loop cases
where we want the outer loop to be aggressively optimized.
Handle this case more aggressively. For example, previously on
phi-duplicate.ll we would get this:
define void @test(i32 %N, double* %G) nounwind ssp {
entry:
%cmp1 = icmp slt i64 1, 1000
br i1 %cmp1, label %bb.nph, label %for.end
bb.nph: ; preds = %entry
br label %for.body
for.body: ; preds = %bb.nph, %for.cond
%j.02 = phi i64 [ 1, %bb.nph ], [ %inc, %for.cond ]
%arrayidx = getelementptr inbounds double* %G, i64 %j.02
%tmp3 = load double* %arrayidx
%sub = sub i64 %j.02, 1
%arrayidx6 = getelementptr inbounds double* %G, i64 %sub
%tmp7 = load double* %arrayidx6
%add = fadd double %tmp3, %tmp7
%arrayidx10 = getelementptr inbounds double* %G, i64 %j.02
store double %add, double* %arrayidx10
%inc = add nsw i64 %j.02, 1
br label %for.cond
for.cond: ; preds = %for.body
%cmp = icmp slt i64 %inc, 1000
br i1 %cmp, label %for.body, label %for.cond.for.end_crit_edge
for.cond.for.end_crit_edge: ; preds = %for.cond
br label %for.end
for.end: ; preds = %for.cond.for.end_crit_edge, %entry
ret void
}
Now we get the much nicer:
define void @test(i32 %N, double* %G) nounwind ssp {
entry:
br label %for.body
for.body: ; preds = %entry, %for.body
%j.01 = phi i64 [ 1, %entry ], [ %inc, %for.body ]
%arrayidx = getelementptr inbounds double* %G, i64 %j.01
%tmp3 = load double* %arrayidx
%sub = sub i64 %j.01, 1
%arrayidx6 = getelementptr inbounds double* %G, i64 %sub
%tmp7 = load double* %arrayidx6
%add = fadd double %tmp3, %tmp7
%arrayidx10 = getelementptr inbounds double* %G, i64 %j.01
store double %add, double* %arrayidx10
%inc = add nsw i64 %j.01, 1
%cmp = icmp slt i64 %inc, 1000
br i1 %cmp, label %for.body, label %for.end
for.end: ; preds = %for.body
ret void
}
With all of these recent changes, we are now able to compile:
void foo(char *X) {
for (int i = 0; i != 100; ++i)
for (int j = 0; j != 100; ++j)
X[j+i*100] = 0;
}
into a single memset of 10000 bytes. This series of changes
should also be helpful for other nested loop scenarios as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123079 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
1. Rip out LoopRotate's domfrontier updating code. It isn't
needed now that LICM doesn't use DF and it is super complex
and gross.
2. Make DomTree updating code a lot simpler and faster. The
old loop over all the blocks was just to find a block??
3. Change the code that inserts the new preheader to just use
SplitCriticalEdge instead of doing an overcomplex
reimplementation of it.
No behavior change, except for the name of the inserted preheader.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123072 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
them into the loop preheader, eliminating silly instructions like
"icmp i32 0, 100" in fixed tripcount loops. This also better exposes the
bigger problem with loop rotate that I'd like to fix: once this has been
folded, the duplicated conditional branch *often* turns into an uncond branch.
Not aggressively handling this is pessimizing later loop optimizations
somethin' fierce by making "dominates all exit blocks" checks fail.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123060 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
in the duplicated block instead of duplicating them.
Duplicating them into the end of the loop and the preheader
means that we got a phi node in the header of the loop,
which prevented LICM from hoisting them. GVN would
usually come around later and merge the duplicated
instructions so we'd get reasonable output... except that
anything dependent on the shoulda-been-hoisted value can't
be hoisted. In PR5319 (which this fixes), a memory value
didn't get promoted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113134 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
loop, making the resulting loop significantly less ugly. Also, zap
its trivial PHI nodes, since it's easy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@111255 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106954 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@92740 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
'GetValueInMiddleOfBlock' case, instead of inserting
duplicates.
A similar fix is almost certainly needed by the machine-level
SSAUpdate implementation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@91820 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
it may be used in contexts where preheader insertion may have failed due
to an indirectbr.
Make LoopSimplify's LoopSimplify::SeparateNestedLoop properly fail in
the case that it would require splitting an indirectbr edge.
These fix PR5502.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89484 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
-verify-dom-info and -verify-loop-info, which enable additional
(expensive) consistency checks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85017 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83002 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
input filename so that opt doesn't print the input filename in the
output so that grep lines in the tests don't unintentionally match
strings in the input filename.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81537 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81257 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
of using llvm-as, now that opt supports this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81226 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69867 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
handling the flaw inherent in that assumption. :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62984 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51349 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
renaming to isnan2. Now that no test has llx ending there is no need to search for them from dg.exp too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51328 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50548 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
of -std-compile-opts and is now failing because other passes are generating
IR that looks different to input of loop rotate. Devang, please
introduce a testcase that only runs loop rotate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50136 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48762 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
OnlyReadsMemoryFns tables are dead! We
get more, and more accurate, information
from gcc via the readnone and readonly
function attributes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44288 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@40629 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@39768 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37801 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36323 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Remove && from the end of the lines to prevent tests from throwing run
lines into the background. Also, clean up places where the same command
is run multiple times by using a temporary file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36142 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Upgrade to use new Tcl exec based test harness.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36062 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35919 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
global variables that needed to be passed in. This makes it possible to
add new global variables with only a couple changes (Makefile and llvm-dg.exp)
instead of touching every single dg.exp file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35918 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35865 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35849 91177308-0d34-0410-b5e6-96231b3b80d8
|