Age | Commit message (Collapse) | Author |
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178364 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
into a CFE and LLVM part.
rdar://problem/12767564
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178353 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This reverts commit 342d92c7a0adeabc9ab00f3f0d88d739fe7da4c7.
Turns out we're going with a different schema design to represent
DW_TAG_imported_modules so we won't need this extra field.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178215 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This is just the basic groundwork for supporting DW_TAG_imported_module but I
wanted to commit this before pushing support further into Clang or LLVM so that
this rather churny change is isolated from the rest of the work. The major
churn here is obviously adding another field (within the common DIScope prefix)
to all DIScopes (files, classes, namespaces, lexical scopes, etc). This should
be the last big churny change needed for DW_TAG_imported_module/using directive
support/PR14606.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178099 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Hexagon does not support -filetype=obj(direct object generation) flag. Therefore,
the following tests are being XFAILed:
test/DebugInfo/dwarf-public-names.ll
test/DebugInfo/member-pointers.ll
test/DebugInfo/two-cus-from-same-file.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177901 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177821 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177754 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
file/directory pair
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177742 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
other DIScopes
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177703 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
the ARM build bots, and it adds a weird case to the test suite where
a test uses as inputs files in the parent directory.
Talked about this with Dave on IRC and he's fine with this approach even
though it isn't optimal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177700 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
directly to the pair rather than the DIFile.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177677 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
with other DIScopes
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177674 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177661 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
file/directory pair
This removes the DICompileUnit special case from DIScope.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177610 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
common DIScope prefix
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177595 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177590 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
the pair rather than the DIFile
(paired to a Clang test - excuse the buildbot skew/fallout)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177566 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The differing file (due to the #line directive in the original source) is for
future testing improvements coming soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177560 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177545 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Moving the DIFile parameter to immediately proceed the tag so that it will be a
common prefix with other DIScopes (once the DIFile is replaced with the raw
file/directory pair).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177492 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This is the backend portion of a Clang test case
(clang/test/CodeGenCXX/debug-info-namespace.cpp) that was roughly/coarsely
testing LLVM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177487 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177474 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
a raw directory/file pair
This makes DIType's first non-tag parameter the same as DIFile's, allowing them
to both share the common implementation of getFilename/getDirectory in DIScope.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177467 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This is another step along the way to making all DIScopes have a common prefix
which can be added to in a general manner to support using directives
(DW_TAG_imported_module).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177462 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This is the first step to making all DIScopes have a common metadata prefix (so
that things (using directives, for example) that can appear in any scope can be
added to that common prefix). DIFile is itself a DIScope so the common prefix
of all DIScopes cannot be a DIFile - instead it's the raw filename/directory
name pair.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177239 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This is the backend part of a CFE test with the same name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177087 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
(extra cleanup/fallout from r176983 - not sure why I didn't catch this locally)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176988 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176983 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This is the next step towards making the metadata for DIScopes have a common
prefix rather than having to delegate based on their tag type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176913 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176910 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This could be 'null' or the empty string, DIDescriptor::getStringField
coalesces the two cases anyway so it's just a matter of legible/efficient
representation.
The change in behavior of the DICompileUnit::get* functions could be
subsumed by the full verification check - but ideally that should just be an
assertion if we could front-load the actual debug info metadata failure paths.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176907 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
debug info format.
These cases were found by further work to remove support for debug info
versioning. Common cleanups (other than changing the version info in the tag
field) included adding the last parameter to compile_units (recently added for
fission support) and other cases of trailing fields in lexical blocks, compile
units, and subprograms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176834 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This pass hasn't been touched in two years & would fail with assertions against
the current debug info metadata format (the only test case for it still uses a
many-versions old debug info metadata format)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176707 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Mostly this is just changing the named metadata (llvm.dbg.sp, llvm.dbg.gv,
llvm.dbg.<func>.lv, etc -> llvm.dbg.cu), adding a few fields to older records
(DIVariable: flags/inlined-at, DICompileUnit: sp/gv/types,
DISubprogram: local variables list)
The tests to update were discovered by a change I'm working on to remove debug
info version support - so any tests using old debug info versions I haven't
updated probably are bad tests or just not actually designed to test debug
info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176671 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
We now emit a line table for each compile unit. To reduce the prologue size
of each line table, the files and directories used by each compile unit are
stored in std::map<unsigned, std::vector< > > instead of std::vector< >.
The prologue for a lto'ed image can be as big as 93K. Duplicating 93K for each
compile unit causes a huge increase of debug info. With this patch, each
prologue will only emit the files required by the compile unit.
rdar://problem/13342023
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176605 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
definition DIE (TAG_variable), and put AT_MIPS_linkage_name to TAG_member when
DarwinGDBCompat is true.
Darwin GDB needs AT_MIPS_linkage_name at both places to work.
Follow-up patch to r176143.
rdar://problem/13291234
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176220 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
definition DIE, to make old GDB happy.
We have a regression for old GDB when Clang uses DW_TAG_member to declare
static members inside a class, instead of DW_TAG_variable. This patch will fix
this regression.
rdar://problem/13291234
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176143 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176129 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
TAG_member inside a class to the specification DIE.
Having AT_MIPS_linkage_name on TAG_member caused old gdb (GNU 6.3.50) to
error out. Also gcc 4.7 has AT_MIPS_linkage_name on the specification DIE.
rdar://problem/13291234
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176120 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
update testcase accordingly to give the correct name to the cu.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175934 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
to lib/DebugInfo, with dumping in llvm-dwarfdump. This patch adds
initial ability to parse and dump CFA instructions contained in
entries.
To keep it manageable, the patch omits some more advanced capabilities
(accounted in TODOs):
* Parsing of instructions with BLOCK arguments (expression lists)
* Dumping of actual instruction arguments (currently only names are
dumped). This is quite tricky since the dumper has to effectively
"interpret" the instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175820 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175168 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175150 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
"x86_64-apple-darwin".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175146 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Remove dead functions: renameRegister
Move private member variables from LDV to Impl
Remove ssp/uwtable from testing case
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175072 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
RegisterCoalescer used to depend on LiveDebugVariable. LDV removes DBG_VALUEs
without emitting them at the end.
We fix this by removing LDV from RegisterCoalescer. Also add an assertion to
make sure we call emitDebugValues if DBG_VALUEs are removed at
runOnMachineFunction.
rdar://problem/13183203
Reviewed by Andy & Jakob
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175023 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174992 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
option "generate-dwarf-pubnames" to control it, set to "false" by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174981 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174891 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This allows llvm-dwarfdump to handle the relocations needed, at least
for LLVM-produced code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174874 91177308-0d34-0410-b5e6-96231b3b80d8
|