Age | Commit message (Collapse) | Author |
|
This implements SJLJ lowering on PPC, making the Clang functions
__builtin_{setjmp/longjmp} functional on PPC platforms. The implementation
strategy is similar to that on X86, with the exception that a branch-and-link
variant is used to get the right jump address. Credit goes to Bill Schmidt for
suggesting the use of the unconditional bcl form (instead of the regular bl
instruction) to limit return-address-cache pollution.
Benchmarking the speed at -O3 of:
static jmp_buf env_sigill;
void foo() {
__builtin_longjmp(env_sigill,1);
}
main() {
...
for (int i = 0; i < c; ++i) {
if (__builtin_setjmp(env_sigill)) {
goto done;
} else {
foo();
}
done:;
}
...
}
vs. the same code using the libc setjmp/longjmp functions on a P7 shows that
this builtin implementation is ~4x faster with Altivec enabled and ~7.25x
faster with Altivec disabled. This comparison is somewhat unfair because the
libc version must also save/restore the VSX registers which we don't yet
support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177666 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177661 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Although there is only one Altivec VRSAVE register, it is a member of
a register class, and we need the ability to spill it. Because this
register is normally callee-preserved and handled by special code this
has never before been necessary. However, this capability will be required by
a forthcoming commit adding SjLj support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177654 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The old code used to lower FRAMEADDR tried to replicate the logic in the real
frame-lowering code that determines whether or not the frame pointer (r31) will
be used. When it seemed as through the frame pointer would not be used, the
stack pointer (r1) was used instead. Unfortunately, because the stack size is
not yet known, this does not work. Instead, this change introduces new
always-reserved pseudo-registers (FP and FP8) that are replaced during prologue
insertion with the real frame-pointer register (either r1 or r31).
It is important that this intrinsic always return a valid frame address because
it is used by Clang to store the frame address as part of code generation for
__builtin_setjmp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177653 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
NEON is not IEEE 754 compliant, so we should avoid lowering single-precision
floating point operations with NEON unless unsafe-math is turned on. The
equivalent VFP instructions are IEEE 754 compliant, but in some cores they're
much slower, so some archs/OSs might still request it to be on by default,
such as Swift and Darwin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177651 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
header.
This method is called in the hot path for *many* passes, SROA is what
caught my interest. A common pattern is that which branch of the switch
should be taken is known in the callsite and so it is a very good
candidate for inlining and simplification. Moving it into the header
allows the optimizer to fold a lot of boring, repeatitive code in
callers of this routine.
I'm seeing pretty significant speedups in parts of SROA and I suspect
other passes will see similar speedups if they end up working with type
sizes frequently. I've not seen any significant growth of the binaries
as a consequence, but let me know if you see anything suspicious here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177632 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The key part of this is ensuring that name prefixes remain in a Twine
form until we get to a point where we can nuke them under NDEBUG. This
is tricky using the old APIs as they played fast and loose with Twine,
which is prone to serious error. The inserter is much cleaner as it is
actually in the call stack leading to the setName call, and so has
a good opportunity to prepend the prefix.
This matters more than you might imagine because most runs over an
alloca find a single partition, and rewrite 3 or 4 instructions
referring to it. As a consequence doing this lazily and exclusively with
Twine allows the optimizer to delete more of it and shaves another 2% to
3% off of the release build's SROA run time for PR15412. I also think
the APIs are cleaner, and the use of Twine is more reliable, so
I consider it a win-win despite the churn required to reach this state.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177631 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177630 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The 'Modified' variable should have been removed from SimplifyLibCalls
in r177619, but was missed. This commit removes it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177622 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177620 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The simplify-libcalls pass implemented a doInitialization hook to infer
function prototype attributes for well-known functions. Given that the
simplify-libcalls pass is going away *and* that the functionattrs pass
is already in place to deduce function attributes, I am moving this logic
to the functionattrs pass. This approach was discussed during patch
review:
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20121126/157465.html.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177619 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177611 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
file/directory pair
This removes the DICompileUnit special case from DIScope.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177610 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
They are generally faster (at least not slower) than post-inc, post-dec.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177608 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177607 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
SDNodeOrdering
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177600 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
It's not yet clear if these instructions need a more careful model.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177599 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This is used for all the expensive system instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177598 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
looking at the loaded-value operand and not the ptr result (in case of pre-inc loads).
rdar://13348420
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177596 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
common DIScope prefix
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177595 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177592 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177591 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177590 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- After moving logic recognizing vector shift with scalar amount from
DAG combining into DAG lowering, we declare to customize all vector
shifts even vector shift on AVX is legal. As a result, the cost model
needs special tuning to identify these legal cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177586 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177584 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Use the new `llvm_gcov_init' function to register the writeout and flush
functions. The initialization function will also call `atexit' for some cleanups
and final writout calls. But it does this only once. This is better than
checking for the `main' function, because in a library that function may not
exist.
<rdar://problem/12439551>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177579 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177576 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
member variable.
Patch by Kai <kai@redstar.de>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177575 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This makes it possible to report multiple errors in one invocation.
There are already calls to PrintError in CodeGenDAGPatterns.cpp which
previously would not cause TableGen to fail.
<rdar://problem/13463339>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177573 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
the pair rather than the DIFile
(paired to a Clang test - excuse the buildbot skew/fallout)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177566 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Patch by Kai Nacke (kai@redstar.de)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177547 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177543 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177540 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177539 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This reverts commit 06091513c283c863296f01cc7c2e86b56bb50d02.
The code is obviously wrong, but the trivial fix causes
inefficient code generation on X86. Somebody with more
knowledge of the code needs to take a look here.
Signed-off-by: Christian König <christian.koenig@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177529 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
case of order propagation during isel.
Thanks Owen for the suggestion!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177525 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
TargetOpcodes need to be treaded as Machine- and not ISD-Opcodes.
Signed-off-by: Christian König <christian.koenig@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177518 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
non-release builds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177498 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This is espcially important because the new SROA pass goes to great
lengths to provide helpful names for debugging, and as a consequence
they can become very slow to render.
Good for between 5% and 15% of the SROA runtime on some slow test cases
such as the one in PR15412.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177495 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
unused statistics variables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177494 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
new SROA pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177493 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Moving the DIFile parameter to immediately proceed the tag so that it will be a
common prefix with other DIScopes (once the DIFile is replaced with the raw
file/directory pair).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177492 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Sorry for the version skew - I should've committed this before the
corresponding Clang test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177486 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- Move SRA/SRL/SHL lowering support from DAG combination to DAG lowering
to support extended 256-bit integer in AVX but not AVX2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177478 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- Prepare moving logic from DAG combining into DAG lowering. There's no
functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177477 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- no functionality change
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177476 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177472 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
a raw directory/file pair
This makes DIType's first non-tag parameter the same as DIFile's, allowing them
to both share the common implementation of getFilename/getDirectory in DIScope.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177467 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
A node's ordering is only propagated during legalization if (a) the new node does
not have an ordering (is not a CSE'd node), or (b) the new node has an ordering
that is higher than the node being legalized.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177465 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Patch by Stepan Dyatkovskiy <stpworld@narod.ru>
rdar://13457826
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177463 91177308-0d34-0410-b5e6-96231b3b80d8
|