Age | Commit message (Collapse) | Author |
|
to also clean up the condition of any conditional terminator it folds to be unconditional, if that turns the condition into dead code. This just means it calls RecursivelyDeleteTriviallyDeadInstructions() in strategic spots. It defaults to the old behavior.
I also changed -simplifycfg, -jump-threading and -codegenprepare to use this to produce slightly better code without any extra cleanup passes (AFAICT this was the only place in -simplifycfg where now-dead conditions of replaced terminators weren't being cleaned up). The only other user of this function is -sccp, but I didn't read that thoroughly enough to figure out whether it might be holding pointers to instructions that could be deleted by this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131855 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131673 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131620 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131609 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131607 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131605 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131598 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131580 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131571 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131566 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131561 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131552 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131551 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131548 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131545 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131508 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131345 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@130528 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@130527 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
phi node folding
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@130526 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
instruction around, reducing work.
Greatly simplify handling of debug instructions. There is no need to
build up a vector of them and then move them into the one predecessor
if we're processing a block. Instead just rescan the block and *copy*
them into the pred. If a block gets merged into multiple preds, this
will retain more debug info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129502 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129319 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129114 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
match.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129078 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129041 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
values also.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129035 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
PHINode::Create() giving the (known or expected) number of operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128537 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128535 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
of pointers in an std::map.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127650 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
reachable uses, but there still might be uses in dead blocks. Use the
standard solution of replacing all the uses with undef. This is
a rare case because it's very sensitive to phase ordering in SimplifyCFG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127299 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
branch.
Based on a patch by Alistair Lynn.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126647 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Yes, there are other types than i8* and GEPs on them can produce an add+multiply.
We don't consider that cheap enough to be speculatively executed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126481 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126452 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
unconditionally.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126445 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
switch. If we used only one icmp, don't turn it into a switch.
Also prevent the switch-to-icmp transform from creating identity adds, noticed by Marius Wachtler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125056 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
are not sorted into sub+icmp.
This transforms another 1000 switches in gcc.c.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124826 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This makes the job of the later optzn passes easier, allowing the vast amount of
icmp transforms to chew on it.
We transform 840 switches in gcc.c, leading to a 16k byte shrink of the resulting
binary on i386-linux.
The testcase from README.txt now compiles into
decl %edi
cmpl $3, %edi
sbbl %eax, %eax
andl $1, %eax
ret
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124724 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124526 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124522 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
unconditional predecessor to enable TCE on demand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124518 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124478 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
branches. PR8575, rdar://5134905, rdar://8911460.
- Allow codegen tail duplication to dup small return blocks after register
allocation is done.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124462 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
a new helper function so it can be reused in e.g. an upcoming SimplifySwitchOnSelect.
No functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123234 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122156 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122054 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
comparisons formed by comparisons. For example,
this:
void foo(unsigned x) {
if (x == 0 || x == 1 || x == 3 || x == 4 || x == 6)
bar();
}
compiles into:
_foo: ## @foo
## BB#0: ## %entry
cmpl $6, %edi
ja LBB0_2
## BB#1: ## %entry
movl %edi, %eax
movl $91, %ecx
btq %rax, %rcx
jb LBB0_3
instead of:
_foo: ## @foo
## BB#0: ## %entry
cmpl $2, %edi
jb LBB0_4
## BB#1: ## %switch.early.test
cmpl $6, %edi
ja LBB0_3
## BB#2: ## %switch.early.test
movl %edi, %eax
movl $88, %ecx
btq %rax, %rcx
jb LBB0_4
This catches a bunch of cases in GCC, which look like this:
%804 = load i32* @which_alternative, align 4, !tbaa !0
%805 = icmp ult i32 %804, 2
%806 = icmp eq i32 %804, 3
%or.cond121 = or i1 %805, %806
%807 = icmp eq i32 %804, 4
%or.cond124 = or i1 %or.cond121, %807
br i1 %or.cond124, label %.thread, label %808
turning this into a range comparison.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122045 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121838 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
which is simpler than finding a place to insert in BB.
- Don't perform the 'if condition hoisting' xform on certain
i1 PHIs, as it interferes with switch formation.
This re-fixes "example 7", without breaking the world hopefully.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121764 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
first, it can kick in on blocks whose conditions have been
folded to a constant, even though one of the edges will be
trivially folded.
second, it doesn't clean up the "if diamond" that it just
eliminated away. This is a problem because other simplifycfg
xforms kick in depending on the order of block visitation,
causing pointless work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121762 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
breaking the selfhost builds, though I can't fathom how.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121761 91177308-0d34-0410-b5e6-96231b3b80d8
|