| Age | Commit message (Collapse) | Author |
|---|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166053 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
We use the enums to query whether an Attributes object has that attribute. The
opaque layer is responsible for knowing where that specific attribute is stored.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165488 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The hasFnAttr method has been replaced by querying the Attributes explicitly. No
intended functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164725 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
LoopUnswitch. Fixes PR12887.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157140 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Allow the "SplitCriticalEdge" function to split the edge to a landing pad. If
the pass is *sure* that it thinks it knows what it's doing, then it may go ahead
and specify that the landing pad can have its critical edge split. The loop
unswitch pass is one of these passes. It will split the critical edges of all
edges coming from a loop to a landing pad not within the loop. Doing so will
retain important loop analysis information, such as loop simplify.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155817 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
even a good hack.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155813 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155166 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
If the loop contains invoke instructions, whose unwind edge escapes the loop,
then don't try to unswitch the loop. Doing so may cause the unwind edge to be
split, which not only is non-trivial but doesn't preserve loop simplify
information.
Fixes PR12573
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154987 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Take this opportunity to generalize the indirectbr bailout logic for
loop transformations. CFG transformations will never get indirectbr
right, and there's no point trying.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154386 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154385 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
http://llvm.org/bugs/show_bug.cgi?id=12343
We have not trivial way for splitting edges that are goes from indirect branch. We can do it with some tricks, but it should be additionally discussed. And it is still dangerous due to difficulty of indirect branches controlling.
Fix forbids this case for unswitching.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153879 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
metrics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152760 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Renamed methods caseBegin, caseEnd and caseDefault with case_begin, case_end, and case_default.
Added some notes relative to case iterators.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152532 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20120130/136146.html
Implemented CaseIterator and it solves almost all described issues: we don't need to mix operand/case/successor indexing anymore. Base iterator class is implemented as a template since it may be initialized either from "const SwitchInst*" or from "SwitchInst*".
ConstCaseIt is just a read-only iterator.
CaseIt is read-write iterator; it allows to change case successor and case value.
Usage of iterator allows totally remove resolveXXXX methods. All indexing convertions done automatically inside the iterator's getters.
Main way of iterator usage looks like this:
SwitchInst *SI = ... // intialize it somehow
for (SwitchInst::CaseIt i = SI->caseBegin(), e = SI->caseEnd(); i != e; ++i) {
BasicBlock *BB = i.getCaseSuccessor();
ConstantInt *V = i.getCaseValue();
// Do something.
}
If you want to convert case number to TerminatorInst successor index, just use getSuccessorIndex iterator's method.
If you want initialize iterator from TerminatorInst successor index, use CaseIt::fromSuccessorIndex(...) method.
There are also related changes in llvm-clients: klee and clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152297 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The purpose of refactoring is to hide operand roles from SwitchInst user (programmer). If you want to play with operands directly, probably you will need lower level methods than SwitchInst ones (TerminatorInst or may be User). After this patch we can reorganize SwitchInst operands and successors as we want.
What was done:
1. Changed semantics of index inside the getCaseValue method:
getCaseValue(0) means "get first case", not a condition. Use getCondition() if you want to resolve the condition. I propose don't mix SwitchInst case indexing with low level indexing (TI successors indexing, User's operands indexing), since it may be dangerous.
2. By the same reason findCaseValue(ConstantInt*) returns actual number of case value. 0 means first case, not default. If there is no case with given value, ErrorIndex will returned.
3. Added getCaseSuccessor method. I propose to avoid usage of TerminatorInst::getSuccessor if you want to resolve case successor BB. Use getCaseSuccessor instead, since internal SwitchInst organization of operands/successors is hidden and may be changed in any moment.
4. Added resolveSuccessorIndex and resolveCaseIndex. The main purpose of these methods is to see how case successors are really mapped in TerminatorInst.
4.1 "resolveSuccessorIndex" was created if you need to level down from SwitchInst to TerminatorInst. It returns TerminatorInst's successor index for given case successor.
4.2 "resolveCaseIndex" converts low level successors index to case index that curresponds to the given successor.
Note: There are also related compatability fix patches for dragonegg, klee, llvm-gcc-4.0, llvm-gcc-4.2, safecode, clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149481 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148252 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148216 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
std::map, since we need to keep a valid pointer to properties of current loop.
Message for r148132:
LoopUnswitch: All helper data that is collected during loop-unswitch iterations was moved to separated class (LUAnalysisCache).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148215 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148149 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148133 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
iterations was moved to separated class (LUAnalysisCache).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148132 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
1. Size heuristics changed. Now we calculate number of unswitching
branches only once per loop.
2. Some checks was moved from UnswitchIfProfitable to
processCurrentLoop, since it is not changed during processCurrentLoop
iteration. It allows decide to skip some loops at an early stage.
Extended statistics:
- Added total number of instructions analyzed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147935 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147226 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147176 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
performance regressions (both execution-time and compile-time) on our
nightly testers.
Original commit message:
Fix for bug #11429: Wrong behaviour for switches. Small improvement for code
size heuristics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147131 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
size heuristics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146578 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146277 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
InstructionSimplify.cpp. Other fixups as needed.
Part of rdar://10500969
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145559 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
not be changed inside the uses enumeration loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145432 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
to be uniqued, without any benefit.
If someone prefers %tmp42 to %42, run instnamer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140634 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
split landingpad instructions into a PHI node.
PR11016
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140592 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
-Wshorten-64-to-32 warning in Instructions.h.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133708 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
"Reinstate r133435 and r133449 (reverted in r133499) now that the clang
self-hosted build failure has been fixed (r133512)."
Due to some additional warnings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133700 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
self-hosted build failure has been fixed (r133512).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133513 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133499 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Change PHINodes to store simple pointers to their incoming basic blocks,
instead of full-blown Uses.
Note that this loses an optimization in SplitCriticalEdge(), because we
can no longer walk the use list of a BasicBlock to find phi nodes. See
the comment I removed starting "However, the foreach loop is slow for
blocks with lots of predecessors".
Extend replaceAllUsesWith() on a BasicBlock to also update any phi
nodes in the block's successors. This mimics what would have happened
when PHINodes were proper Users of their incoming blocks. (Note that
this only works if OldBB->replaceAllUsesWith(NewBB) is called when
OldBB still has a terminator instruction, so it still has some
successors.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133435 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
which edge to split by pred/succ pair, which means that we can end up splitting
the wrong edge (by case value) in the switch statement entirely. Fixes PR10031!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132535 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132071 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132025 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
case of a switch instruction. Back off this optimization when this would
eliminate all of the predecessors to the latch.
Sorry, I am unable to reduce a reasonably sized test case.
rdar://9486843
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132022 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
a loop when unswitching it. It only does this in the complex case, because
everything should be fine already in the simple case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125369 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
1. Take a flags argument instead of a bool. This makes
it more clear to the reader what it is used for.
2. Add a flag that says that "remapping a value not in the
map is ok".
3. Reimplement MapValue to share a bunch of code and be a lot
more efficient. For lookup failures, don't drop null values
into the map.
4. Using the new flag a bunch of code can vaporize in LinkModules
and LoopUnswitch, kill it.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123058 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
(which does constant folding and more) is called a few lines
later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120042 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
preserves LCSSA form out of ScalarEvolution and into the LoopInfo
class. Use it to check that SimplifyInstruction simplifications
are not breaking LCSSA form. Fixes PR8622.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119727 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
it to get better phi node simplification.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119055 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
they do not also require them. This allows us to reduce inter-pass linkage
dependencies.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116854 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
exposes an initializeMyPassFunction(), which
must be called in the pass's constructor. This function uses static dependency declarations to recursively initialize
the pass's dependencies.
Clients that only create passes through the createFooPass() APIs will require no changes. Clients that want to use the
CommandLine options for passes will need to manually call the appropriate initialization functions in PassInitialization.h
before parsing commandline arguments.
I have tested this with all standard configurations of clang and llvm-gcc on Darwin. It is possible that there are problems
with the static dependencies that will only be visible with non-standard options. If you encounter any crash in pass
registration/creation, please send the testcase to me directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116820 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116387 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
perform initialization without static constructors AND without explicit initialization
by the client. For the moment, passes are required to initialize both their
(potential) dependencies and any passes they preserve. I hope to be able to relax
the latter requirement in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116334 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115996 91177308-0d34-0410-b5e6-96231b3b80d8
|
