Age | Commit message (Collapse) | Author |
|
specific backends.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152537 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152301 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151318 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The tied source operand of tMUL is the second source operand, not the
first like every other two-address thumb instruction. Special case it
in the size reduction pass to make sure we create the tMUL instruction
properly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151315 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146805 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
to finalize MI bundles (i.e. add BUNDLE instruction and computing register def
and use lists of the BUNDLE instruction) and a pass to unpack bundles.
- Teach more of MachineBasic and MachineInstr methods to be bundle aware.
- Switch Thumb2 IT block to MI bundles and delete the hazard recognizer hack to
prevent IT blocks from being broken apart.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146542 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
generator to it. For non-bundle instructions, these behave exactly the same
as the MC layer API.
For properties like mayLoad / mayStore, look into the bundle and if any of the
bundled instructions has the property it would return true.
For properties like isPredicable, only return true if *all* of the bundled
instructions have the property.
For properties like canFoldAsLoad, isCompare, conservatively return false for
bundles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146026 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143145 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Add the predicate operand to the instructions. Update the back end
accordingly where the instructions are used. Restrict the SP operands
to actually only be SP, as otherwise these break assembly parsing for the
normal instruction variants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138445 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Refactor the SXTB, SXTH, SXTB16, UXTB, UXTH, and UXTB16 instructions to not
have an 'r' and an 'r_rot' version, but just a single version with a rotate
that can be zero. Use plain Pat<>'s for the ISel of the non-rotated version.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136225 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
ARM MC code from target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135636 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
(low two bits always zero, so off by one bit of encoded value).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134247 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
t2MOVCC[ri] are just t2MOV[ri] instructions, so properly pseudo-ize them.
The Thumb1 versions, tMOVCC[ri] were only present for use by the size-
reduction pass, so they're no longer necessary at all and can be deleted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134242 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Merge the tMOVr, tMOVgpr2tgpr, tMOVtgpr2gpr, and tMOVgpr2gpr instructions
into tMOVr. There's no need to keep them separate. Giving the tMOVr
instruction the proper GPR register class for its operands is sufficient
to give the register allocator enough information to do the right thing
directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134204 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
tADDrSPi is not predicable, so we can't size-reduce a t2ADDri to it if the
predicate is anything other than "always."
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134130 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Unlike Thumb1, Thumb2 does not have dedicated encodings for adjusting the
stack pointer. It can just use the normal add-register-immediate encoding
since it can use all registers as a source, not just R0-R7. The extra
instruction definitions are just duplicates of the normal instructions with
the (not well enforced) constraint that the source register was SP.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134114 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
sink them into MC layer.
- Added MCInstrInfo, which captures the tablegen generated static data. Chang
TargetInstrInfo so it's based off MCInstrInfo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134021 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
There are probably more instances of this floating around.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@130474 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
(and add false dependency) when it isn't dependent on last CPSR defining
instruction. rdar://8928208
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129773 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127102 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
(which worked around it). This should get us back to the old, correct behavior, though it will make the integrated assembler unhappy for the time being.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125127 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
t2LDRpci with t2LDRi12.
There are a couple of problems with this.
1. The encoding for the literal and immediate constant are different.
Note bit 7 of the literal case is 'U' so it can be negative.
2. t2LDRi12 is now narrowed to tLDRpci before constant island pass is run.
So we end up never using the Thumb2 instruction, which ends up creating a
lot more constant islands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125074 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
instruction based on the t_addrmode_s# mode and what it returned. There is some
obvious badness to this. In particular, it's hard to do MC-encoding when the
instruction may change out from underneath you after the t_addrmode_s# variable
is finally resolved.
The solution is to revert a long-ago change that merged the reg/reg and reg/imm
versions. There is the addition of several new addressing modes. They no longer
have extraneous operands associated with them. I.e., if it's reg/reg we don't
have to have a dummy zero immediate tacked on to the SDNode.
There are some obvious cleanups here, which will happen shortly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121747 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
possible. They were duplicates for everything exception the source pattern
before.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121179 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
gazillion places that need to know about it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121082 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Check for that and try narrowing it to tADDspi instead. Radar 8724703.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120892 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
tCMPzhir has undefined behavior when both source registers are low registers.
rdar://8728577
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120858 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
immediate offset.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120833 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120822 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
'db', 'ib', 'da') instead of having that mode as a separate field in the
instruction. It's more convenient for the asm parser and much more readable for
humans.
<rdar://problem/8654088>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119310 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113846 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
register must be one of the destination registers for the load. Otherwise,
the tLDM instruction will write-back to the base register, which isn't what's
desired (otherwise, we'd have a t2LDM_UPD instead).
rdar://8394087
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113297 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110460 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110410 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
address of the static
ID member as the sole unique type identifier. Clean up APIs related to this change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110396 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
form so they can be narrowed to 16-bit instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106762 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105634 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@101144 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98430 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
writebacks to the address register. This gets rid of the hack that the
first register on the list was the magic writeback register operand. There
was an implicit constraint that if that operand was not reg0 it had to match
the base register operand. The post-RA scheduler's antidependency breaker
did not understand that constraint and sometimes changed one without the
other. This also fixes Radar 7495976 and should help the verifier work
better for ARM code.
There are now new ld/st instructions explicit writeback operands and explicit
constraints that tie those registers together.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98409 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
tMOVCCi pattern only valid for low registers, as the Thumb1 mov immediate to
register instruction only works with low registers. Allowing high registers
for the instruction resulted in the assembler choosing the wide (32-bit)
encoding for the mov, but LLVM though the instruction was only 16 bits wide,
so offset calculations for constant pools became incorrect, leading to
out of range constant pool entries.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95686 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
cannot be directly interchanged for comparisons against negated values.
Disable the CMN instructions for the time being.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94119 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Patch by Howard Hinnant!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@90365 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
than doing the same via constpool:
1. Load from constpool costs 3 cycles on A9, movt/movw pair - just 2.
2. Load from constpool might stall up to 300 cycles due to cache miss.
3. Movt/movw does not use load/store unit.
4. Less constpool entries => better compiler performance.
This is only enabled on ELF systems, since darwin does not have needed
relocations (yet).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89720 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89326 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
VISIBILITY_HIDDEN removal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85043 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Chris claims we should never have visibility_hidden inside any .cpp file but
that's still not true even after this commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85042 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
instruction. This makes it re-materializable.
Thumb2 will split it back out into two instructions so IT pass will generate the
right mask. Also, this expose opportunies to optimize the movw to a 16-bit move.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82982 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81318 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
about by icc (#593, partial). Patch by Erick Tryzelaar.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81115 91177308-0d34-0410-b5e6-96231b3b80d8
|