7604 files changed, 774471 insertions, 400738 deletions

diff --git a/.gitignore b/.gitignore
index 51bd99d6a26..cecb3b040cc 100644
--- a/.gitignore
+++ b/.gitignore
@@ -3,7 +3,7 @@
 # subdirectories here. Add them in the ".gitignore" file
 # in that subdirectory instead.
 #
-# NOTE! Please use 'git-ls-files -i --exclude-standard'
+# NOTE! Please use 'git ls-files -i --exclude-standard'
 # command after changing this file, to see if there are
 # any tracked files which get ignored after the change.
 #
@@ -25,6 +25,8 @@
 *.elf
 *.bin
 *.gz
+*.lzma
+*.patch
 
 #
 # Top-level generic files
@@ -62,6 +64,12 @@ series
 cscope.*
 ncscope.*
 
+# gnu global files
+GPATH
+GRTAGS
+GSYMS
+GTAGS
+
 *.orig
 *~
 \#*#
diff --git a/CREDITS b/CREDITS
index 2520ba620ff..2b88fb37ad5 100644
--- a/CREDITS
+++ b/CREDITS
@@ -1253,6 +1253,10 @@ S: 8124 Constitution Apt. 7
 S: Sterling Heights, Michigan 48313
 S: USA
 
+N: Wolfgang Grandegger
+E: wg@grandegger.com
+D: Controller Area Network (device drivers)
+
 N: William Greathouse
 E: wgreathouse@smva.com
 E: wgreathouse@myfavoritei.com
diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block
index 44f52a4f590..cbbd3e06994 100644
--- a/Documentation/ABI/testing/sysfs-block
+++ b/Documentation/ABI/testing/sysfs-block
@@ -60,3 +60,62 @@ Description:
 		Indicates whether the block layer should automatically
 		generate checksums for write requests bound for
 		devices that support receiving integrity metadata.
+
+What:		/sys/block/<disk>/alignment_offset
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Storage devices may report a physical block size that is
+		bigger than the logical block size (for instance a drive
+		with 4KB physical sectors exposing 512-byte logical
+		blocks to the operating system).  This parameter
+		indicates how many bytes the beginning of the device is
+		offset from the disk's natural alignment.
+
+What:		/sys/block/<disk>/<partition>/alignment_offset
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Storage devices may report a physical block size that is
+		bigger than the logical block size (for instance a drive
+		with 4KB physical sectors exposing 512-byte logical
+		blocks to the operating system).  This parameter
+		indicates how many bytes the beginning of the partition
+		is offset from the disk's natural alignment.
+
+What:		/sys/block/<disk>/queue/logical_block_size
+Date:		May 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		This is the smallest unit the storage device can
+		address.  It is typically 512 bytes.
+
+What:		/sys/block/<disk>/queue/physical_block_size
+Date:		May 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		This is the smallest unit the storage device can write
+		without resorting to read-modify-write operation.  It is
+		usually the same as the logical block size but may be
+		bigger.  One example is SATA drives with 4KB sectors
+		that expose a 512-byte logical block size to the
+		operating system.
+
+What:		/sys/block/<disk>/queue/minimum_io_size
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Storage devices may report a preferred minimum I/O size,
+		which is the smallest request the device can perform
+		without incurring a read-modify-write penalty.  For disk
+		drives this is often the physical block size.  For RAID
+		arrays it is often the stripe chunk size.
+
+What:		/sys/block/<disk>/queue/optimal_io_size
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Storage devices may report an optimal I/O size, which is
+		the device's preferred unit of receiving I/O.  This is
+		rarely reported for disk drives.  For RAID devices it is
+		usually the stripe width or the internal block size.
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index 97ad190e13a..6bf68053e4b 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -122,3 +122,10 @@ Description:
 		This symbolic link appears when a device is a Virtual Function.
 		The symbolic link points to the PCI device sysfs entry of the
 		Physical Function this device associates with.
+
+What:		/sys/bus/pci/slots/.../module
+Date:		June 2009
+Contact:	linux-pci@vger.kernel.org
+Description:
+		This symbolic link points to the PCI hotplug controller driver
+		module that manages the hotplug slot.
diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
new file mode 100644
index 00000000000..0a92a7c93a6
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
@@ -0,0 +1,33 @@
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/model
+Date:		March 2009
+Kernel Version: 2.6.30
+Contact:	iss_storagedev@hp.com
+Description:	Displays the SCSI INQUIRY page 0 model for logical drive
+		Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/rev
+Date:		March 2009
+Kernel Version: 2.6.30
+Contact:	iss_storagedev@hp.com
+Description:	Displays the SCSI INQUIRY page 0 revision for logical
+		drive Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/unique_id
+Date:		March 2009
+Kernel Version: 2.6.30
+Contact:	iss_storagedev@hp.com
+Description:	Displays the SCSI INQUIRY page 83 serial number for logical
+		drive Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/vendor
+Date:		March 2009
+Kernel Version: 2.6.30
+Contact:	iss_storagedev@hp.com
+Description:	Displays the SCSI INQUIRY page 0 vendor for logical drive
+		Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/block:cciss!cXdY
+Date:		March 2009
+Kernel Version: 2.6.30
+Contact:	iss_storagedev@hp.com
+Description:	A symbolic link to /sys/block/cciss!cXdY
diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd
new file mode 100644
index 00000000000..4d55a188898
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-mtd
@@ -0,0 +1,125 @@
+What:		/sys/class/mtd/
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		The mtd/ class subdirectory belongs to the MTD subsystem
+		(MTD core).
+
+What:		/sys/class/mtd/mtdX/
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		The /sys/class/mtd/mtd{0,1,2,3,...} directories correspond
+		to each /dev/mtdX character device.  These may represent
+		physical/simulated flash devices, partitions on a flash
+		device, or concatenated flash devices.  They exist regardless
+		of whether CONFIG_MTD_CHAR is actually enabled.
+
+What:		/sys/class/mtd/mtdXro/
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		These directories provide the corresponding read-only device
+		nodes for /sys/class/mtd/mtdX/ .  They are only created
+		(for the benefit of udev) if CONFIG_MTD_CHAR is enabled.
+
+What:		/sys/class/mtd/mtdX/dev
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Major and minor numbers of the character device corresponding
+		to this MTD device (in <major>:<minor> format).  This is the
+		read-write device so <minor> will be even.
+
+What:		/sys/class/mtd/mtdXro/dev
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Major and minor numbers of the character device corresponding
+		to the read-only variant of thie MTD device (in
+		<major>:<minor> format).  In this case <minor> will be odd.
+
+What:		/sys/class/mtd/mtdX/erasesize
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		"Major" erase size for the device.  If numeraseregions is
+		zero, this is the eraseblock size for the entire device.
+		Otherwise, the MEMGETREGIONCOUNT/MEMGETREGIONINFO ioctls
+		can be used to determine the actual eraseblock layout.
+
+What:		/sys/class/mtd/mtdX/flags
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		A hexadecimal value representing the device flags, ORed
+		together:
+
+		0x0400: MTD_WRITEABLE - device is writable
+		0x0800: MTD_BIT_WRITEABLE - single bits can be flipped
+		0x1000: MTD_NO_ERASE - no erase necessary
+		0x2000: MTD_POWERUP_LOCK - always locked after reset
+
+What:		/sys/class/mtd/mtdX/name
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		A human-readable ASCII name for the device or partition.
+		This will match the name in /proc/mtd .
+
+What:		/sys/class/mtd/mtdX/numeraseregions
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		For devices that have variable eraseblock sizes, this
+		provides the total number of erase regions.  Otherwise,
+		it will read back as zero.
+
+What:		/sys/class/mtd/mtdX/oobsize
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Number of OOB bytes per page.
+
+What:		/sys/class/mtd/mtdX/size
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Total size of the device/partition, in bytes.
+
+What:		/sys/class/mtd/mtdX/type
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		One of the following ASCII strings, representing the device
+		type:
+
+		absent, ram, rom, nor, nand, dataflash, ubi, unknown
+
+What:		/sys/class/mtd/mtdX/writesize
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Minimal writable flash unit size.  This will always be
+		a positive integer.
+
+		In the case of NOR flash it is 1 (even though individual
+		bits can be cleared).
+
+		In the case of NAND flash it is one NAND page (or a
+		half page, or a quarter page).
+
+		In the case of ECC NOR, it is the ECC block size.
diff --git a/Documentation/ABI/testing/sysfs-devices-cache_disable b/Documentation/ABI/testing/sysfs-devices-cache_disable
new file mode 100644
index 00000000000..175bb4f7051
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-cache_disable
@@ -0,0 +1,18 @@
+What:      /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X
+Date:      August 2008
+KernelVersion:	2.6.27
+Contact:	mark.langsdorf@amd.com
+Description:	These files exist in every cpu's cache index directories.
+		There are currently 2 cache_disable_# files in each
+		directory.  Reading from these files on a supported
+		processor will return that cache disable index value
+		for that processor and node.  Writing to one of these
+		files will cause the specificed cache index to be disabled.
+
+		Currently, only AMD Family 10h Processors support cache index
+		disable, and only for their L3 caches.  See the BIOS and
+		Kernel Developer's Guide at
+		http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf
+		for formatting information and other details on the
+		cache index disable.
+Users:    joachim.deguara@amd.com
diff --git a/Documentation/ABI/testing/sysfs-fs-ext4 b/Documentation/ABI/testing/sysfs-fs-ext4
index 4e79074de28..5fb709997d9 100644
--- a/Documentation/ABI/testing/sysfs-fs-ext4
+++ b/Documentation/ABI/testing/sysfs-fs-ext4
@@ -79,3 +79,13 @@ Description:
 		This file is read-only and shows the number of
 		kilobytes of data that have been written to this
 		filesystem since it was mounted.
+
+What:		/sys/fs/ext4/<disk>/inode_goal
+Date:		June 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		Tuning parameter which (if non-zero) controls the goal
+		inode used by the inode allocator in p0reference to
+		all other allocation hueristics.  This is intended for
+		debugging use only, and should be 0 on production
+		systems.
diff --git a/Documentation/ABI/testing/sysfs-pps b/Documentation/ABI/testing/sysfs-pps
new file mode 100644
index 00000000000..25028c7bc37
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-pps
@@ -0,0 +1,73 @@
+What:		/sys/class/pps/
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ directory will contain files and
+		directories that will provide a unified interface to
+		the PPS sources.
+
+What:		/sys/class/pps/ppsX/
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/ directory is related to X-th
+		PPS source into the system. Each directory will
+		contain files to manage and control its PPS source.
+
+What:		/sys/class/pps/ppsX/assert
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/assert file reports the assert events
+		and the assert sequence number of the X-th source in the form:
+
+			<secs>.<nsec>#<sequence>
+
+		If the source has no assert events the content of this file
+		is empty.
+
+What:		/sys/class/pps/ppsX/clear
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/clear file reports the clear events
+		and the clear sequence number of the X-th source in the form:
+
+			<secs>.<nsec>#<sequence>
+
+		If the source has no clear events the content of this file
+		is empty.
+
+What:		/sys/class/pps/ppsX/mode
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/mode file reports the functioning
+		mode of the X-th source in hexadecimal encoding.
+
+		Please, refer to linux/include/linux/pps.h for further
+		info.
+
+What:		/sys/class/pps/ppsX/echo
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/echo file reports if the X-th does
+		or does not support an "echo" function.
+
+What:		/sys/class/pps/ppsX/name
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/name file reports the name of the
+		X-th source.
+
+What:		/sys/class/pps/ppsX/path
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/path file reports the path name of
+		the device connected with the X-th source.
+
+		If the source is not connected with any device the content
+		of this file is empty.
diff --git a/Documentation/Changes b/Documentation/Changes
index b95082be4d5..6d0f1efc5bf 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -29,7 +29,7 @@ hardware, for example, you probably needn't concern yourself with
 isdn4k-utils.
 
 o  Gnu C                  3.2                     # gcc --version
-o  Gnu make               3.79.1                  # make --version
+o  Gnu make               3.80                    # make --version
 o  binutils               2.12                    # ld -v
 o  util-linux             2.10o                   # fdformat --version
 o  module-init-tools      0.9.10                  # depmod -V
@@ -48,6 +48,7 @@ o  procps                 3.2.0                   # ps --version
 o  oprofile               0.9                     # oprofiled --version
 o  udev                   081                     # udevinfo -V
 o  grub                   0.93                    # grub --version
+o  mcelog		  0.6
 
 Kernel compilation
 ==================
@@ -61,7 +62,7 @@ computer.
 Make
 ----
 
-You will need Gnu make 3.79.1 or later to build the kernel.
+You will need Gnu make 3.80 or later to build the kernel.
 
 Binutils
 --------
@@ -71,6 +72,13 @@ assembling the 16-bit boot code, removing the need for as86 to compile
 your kernel.  This change does, however, mean that you need a recent
 release of binutils.
 
+Perl
+----
+
+You will need perl 5 and the following modules: Getopt::Long, Getopt::Std,
+File::Basename, and File::Find to build the kernel.
+
+
 System utilities
 ================
 
@@ -276,6 +284,16 @@ before running exportfs or mountd.  It is recommended that all NFS
 services be protected from the internet-at-large by a firewall where
 that is possible.
 
+mcelog
+------
+
+In Linux 2.6.31+ the i386 kernel needs to run the mcelog utility
+as a regular cronjob similar to the x86-64 kernel to process and log
+machine check events when CONFIG_X86_NEW_MCE is enabled. Machine check
+events are errors reported by the CPU. Processing them is strongly encouraged.
+All x86-64 kernels since 2.6.4 require the mcelog utility to
+process machine checks.
+
 Getting updated software
 ========================
 
@@ -365,6 +383,10 @@ FUSE
 ----
 o <http://sourceforge.net/projects/fuse>
 
+mcelog
+------
+o <ftp://ftp.kernel.org/pub/linux/utils/cpu/mce/mcelog/>
+
 Networking
 **********
 
diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle
index 72968cd5eaf..8bb37237ebd 100644
--- a/Documentation/CodingStyle
+++ b/Documentation/CodingStyle
@@ -698,8 +698,8 @@ very often is not. Abundant use of the inline keyword leads to a much bigger
 kernel, which in turn slows the system as a whole down, due to a bigger
 icache footprint for the CPU and simply because there is less memory
 available for the pagecache. Just think about it; a pagecache miss causes a
-disk seek, which easily takes 5 miliseconds. There are a LOT of cpu cycles
-that can go into these 5 miliseconds.
+disk seek, which easily takes 5 milliseconds. There are a LOT of cpu cycles
+that can go into these 5 milliseconds.
 
 A reasonable rule of thumb is to not put inline at functions that have more
 than 3 lines of code in them. An exception to this rule are the cases where
diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index d9aa43d78bc..5aceb88b3f8 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -676,8 +676,8 @@ this directory the following files can currently be found:
 	dma-api/all_errors	This file contains a numeric value. If this
 				value is not equal to zero the debugging code
 				will print a warning for every error it finds
-				into the kernel log. Be carefull with this
-				option. It can easily flood your logs.
+				into the kernel log. Be careful with this
+				option, as it can easily flood your logs.
 
 	dma-api/disabled	This read-only file contains the character 'Y'
 				if the debugging code is disabled. This can
@@ -704,12 +704,24 @@ this directory the following files can currently be found:
 				The current number of free dma_debug_entries
 				in the allocator.
 
+	dma-api/driver-filter
+				You can write a name of a driver into this file
+				to limit the debug output to requests from that
+				particular driver. Write an empty string to
+				that file to disable the filter and see
+				all errors again.
+
 If you have this code compiled into your kernel it will be enabled by default.
 If you want to boot without the bookkeeping anyway you can provide
 'dma_debug=off' as a boot parameter. This will disable DMA-API debugging.
 Notice that you can not enable it again at runtime. You have to reboot to do
 so.
 
+If you want to see debug messages only for a special device driver you can
+specify the dma_debug_driver=<drivername> parameter. This will enable the
+driver filter at boot time. The debug code will only print errors for that
+driver afterwards. This filter can be disabled or changed later using debugfs.
+
 When the code disables itself at runtime this is most likely because it ran
 out of dma_debug_entries. These entries are preallocated at boot. The number
 of preallocated entries is defined per architecture. If it is too low for you
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index b1eb661e630..9632444f6c6 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -13,7 +13,8 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
 	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
 	    mac80211.xml debugobjects.xml sh.xml regulator.xml \
-	    alsa-driver-api.xml writing-an-alsa-driver.xml
+	    alsa-driver-api.xml writing-an-alsa-driver.xml \
+	    tracepoint.xml
 
 ###
 # The build process is as follows (targets):
diff --git a/Documentation/DocBook/debugobjects.tmpl b/Documentation/DocBook/debugobjects.tmpl
index 7f5f218015f..08ff908aa7a 100644
--- a/Documentation/DocBook/debugobjects.tmpl
+++ b/Documentation/DocBook/debugobjects.tmpl
@@ -106,7 +106,7 @@
       number of errors are printk'ed including a full stack trace.
     </para>
     <para>
-      The statistics are available via debugfs/debug_objects/stats.
+      The statistics are available via /sys/kernel/debug/debug_objects/stats.
       They provide information about the number of warnings and the
       number of successful fixups along with information about the
       usage of the internal tracking objects and the state of the
diff --git a/Documentation/DocBook/mac80211.tmpl b/Documentation/DocBook/mac80211.tmpl
index fbeaffc1dcc..e3698666357 100644
--- a/Documentation/DocBook/mac80211.tmpl
+++ b/Documentation/DocBook/mac80211.tmpl
@@ -145,7 +145,6 @@ usage should require reading the full document.
         interface in STA mode at first!
       </para>
 !Finclude/net/mac80211.h ieee80211_if_init_conf
-!Finclude/net/mac80211.h ieee80211_if_conf
     </chapter>
 
     <chapter id="rx-tx">
diff --git a/Documentation/DocBook/tracepoint.tmpl b/Documentation/DocBook/tracepoint.tmpl
new file mode 100644
index 00000000000..b0756d0fd57
--- /dev/null
+++ b/Documentation/DocBook/tracepoint.tmpl
@@ -0,0 +1,89 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="Tracepoints">
+ <bookinfo>
+  <title>The Linux Kernel Tracepoint API</title>
+
+  <authorgroup>
+   <author>
+    <firstname>Jason</firstname>
+    <surname>Baron</surname>
+    <affiliation>
+     <address>
+      <email>jbaron@redhat.com</email>
+     </address>
+    </affiliation>
+   </author>
+  </authorgroup>
+
+  <legalnotice>
+   <para>
+     This documentation is free software; you can redistribute
+     it and/or modify it under the terms of the GNU General Public
+     License as published by the Free Software Foundation; either
+     version 2 of the License, or (at your option) any later
+     version.
+   </para>
+
+   <para>
+     This program is distributed in the hope that it will be
+     useful, but WITHOUT ANY WARRANTY; without even the implied
+     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+     See the GNU General Public License for more details.
+   </para>
+
+   <para>
+     You should have received a copy of the GNU General Public
+     License along with this program; if not, write to the Free
+     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+     MA 02111-1307 USA
+   </para>
+
+   <para>
+     For more details see the file COPYING in the source
+     distribution of Linux.
+   </para>
+  </legalnotice>
+ </bookinfo>
+
+ <toc></toc>
+  <chapter id="intro">
+   <title>Introduction</title>
+   <para>
+     Tracepoints are static probe points that are located in strategic points
+     throughout the kernel. 'Probes' register/unregister with tracepoints
+     via a callback mechanism. The 'probes' are strictly typed functions that
+     are passed a unique set of parameters defined by each tracepoint.
+   </para>
+
+   <para>
+     From this simple callback mechanism, 'probes' can be used to profile, debug,
+     and understand kernel behavior. There are a number of tools that provide a
+     framework for using 'probes'. These tools include Systemtap, ftrace, and
+     LTTng.
+   </para>
+
+   <para>
+     Tracepoints are defined in a number of header files via various macros. Thus,
+     the purpose of this document is to provide a clear accounting of the available
+     tracepoints. The intention is to understand not only what tracepoints are
+     available but also to understand where future tracepoints might be added.
+   </para>
+
+   <para>
+     The API presented has functions of the form:
+     <function>trace_tracepointname(function parameters)</function>. These are the
+     tracepoints callbacks that are found throughout the code. Registering and
+     unregistering probes with these callback sites is covered in the
+     <filename>Documentation/trace/*</filename> directory.
+   </para>
+  </chapter>
+
+  <chapter id="irq">
+   <title>IRQ</title>
+!Iinclude/trace/events/irq.h
+  </chapter>
+
+</book>
diff --git a/Documentation/PCI/pcieaer-howto.txt b/Documentation/PCI/pcieaer-howto.txt
index ddeb14beacc..be21001ab14 100644
--- a/Documentation/PCI/pcieaer-howto.txt
+++ b/Documentation/PCI/pcieaer-howto.txt
@@ -61,6 +61,10 @@ be initiated although firmwares have no _OSC support. To enable the
 walkaround, pls. add aerdriver.forceload=y to kernel boot parameter line
 when booting kernel. Note that forceload=n by default.
 
+nosourceid, another parameter of type bool, can be used when broken
+hardware (mostly chipsets) has root ports that cannot obtain the reporting
+source ID. nosourceid=n by default.
+
 2.3 AER error output
 When a PCI-E AER error is captured, an error message will be outputed to
 console. If it's a correctable error, it is outputed as a warning.
@@ -246,3 +250,24 @@ with the PCI Express AER Root driver?
 A: It could call the helper functions to enable AER in devices and
 cleanup uncorrectable status register. Pls. refer to section 3.3.
 
+
+4. Software error injection
+
+Debugging PCIE AER error recovery code is quite difficult because it
+is hard to trigger real hardware errors. Software based error
+injection can be used to fake various kinds of PCIE errors.
+
+First you should enable PCIE AER software error injection in kernel
+configuration, that is, following item should be in your .config.
+
+CONFIG_PCIEAER_INJECT=y or CONFIG_PCIEAER_INJECT=m
+
+After reboot with new kernel or insert the module, a device file named
+/dev/aer_inject should be created.
+
+Then, you need a user space tool named aer-inject, which can be gotten
+from:
+    http://www.kernel.org/pub/linux/utils/pci/aer-inject/
+
+More information about aer-inject can be found in the document comes
+with its source code.
diff --git a/Documentation/RCU/rculist_nulls.txt b/Documentation/RCU/rculist_nulls.txt
index 6389dec3345..93cb28d05dc 100644
--- a/Documentation/RCU/rculist_nulls.txt
+++ b/Documentation/RCU/rculist_nulls.txt
@@ -118,7 +118,7 @@ to another chain) checking the final 'nulls' value if
 the lookup met the end of chain. If final 'nulls' value
 is not the slot number, then we must restart the lookup at
 the beginning. If the object was moved to the same chain,
-then the reader doesnt care : It might eventually
+then the reader doesn't care : It might eventually
 scan the list again without harm.
 
 
diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt
index 068848240a8..02cced183b2 100644
--- a/Documentation/RCU/trace.txt
+++ b/Documentation/RCU/trace.txt
@@ -192,23 +192,24 @@ rcu/rcuhier (which displays the struct rcu_node hierarchy).
 The output of "cat rcu/rcudata" looks as follows:
 
 rcu:
-  0 c=4011 g=4012 pq=1 pqc=4011 qp=0 rpfq=1 rp=3c2a dt=23301/73 dn=2 df=1882 of=0 ri=2126 ql=2 b=10
-  1 c=4011 g=4012 pq=1 pqc=4011 qp=0 rpfq=3 rp=39a6 dt=78073/1 dn=2 df=1402 of=0 ri=1875 ql=46 b=10
-  2 c=4010 g=4010 pq=1 pqc=4010 qp=0 rpfq=-5 rp=1d12 dt=16646/0 dn=2 df=3140 of=0 ri=2080 ql=0 b=10
-  3 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=2b50 dt=21159/1 dn=2 df=2230 of=0 ri=1923 ql=72 b=10
-  4 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=1644 dt=5783/1 dn=2 df=3348 of=0 ri=2805 ql=7 b=10
-  5 c=4012 g=4013 pq=0 pqc=4011 qp=1 rpfq=3 rp=1aac dt=5879/1 dn=2 df=3140 of=0 ri=2066 ql=10 b=10
-  6 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=ed8 dt=5847/1 dn=2 df=3797 of=0 ri=1266 ql=10 b=10
-  7 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=1fa2 dt=6199/1 dn=2 df=2795 of=0 ri=2162 ql=28 b=10
+rcu:
+  0 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=10951/1 dn=0 df=1101 of=0 ri=36 ql=0 b=10
+  1 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=16117/1 dn=0 df=1015 of=0 ri=0 ql=0 b=10
+  2 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1445/1 dn=0 df=1839 of=0 ri=0 ql=0 b=10
+  3 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=6681/1 dn=0 df=1545 of=0 ri=0 ql=0 b=10
+  4 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1003/1 dn=0 df=1992 of=0 ri=0 ql=0 b=10
+  5 c=17829 g=17830 pq=1 pqc=17829 qp=1 dt=3887/1 dn=0 df=3331 of=0 ri=4 ql=2 b=10
+  6 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=859/1 dn=0 df=3224 of=0 ri=0 ql=0 b=10
+  7 c=17829 g=17830 pq=0 pqc=17829 qp=1 dt=3761/1 dn=0 df=1818 of=0 ri=0 ql=2 b=10
 rcu_bh:
-  0 c=-268 g=-268 pq=1 pqc=-268 qp=0 rpfq=-145 rp=21d6 dt=23301/73 dn=2 df=0 of=0 ri=0 ql=0 b=10
-  1 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-170 rp=20ce dt=78073/1 dn=2 df=26 of=0 ri=5 ql=0 b=10
-  2 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-83 rp=fbd dt=16646/0 dn=2 df=28 of=0 ri=4 ql=0 b=10
-  3 c=-268 g=-268 pq=1 pqc=-268 qp=0 rpfq=-105 rp=178c dt=21159/1 dn=2 df=28 of=0 ri=2 ql=0 b=10
-  4 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-30 rp=b54 dt=5783/1 dn=2 df=32 of=0 ri=0 ql=0 b=10
-  5 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-29 rp=df5 dt=5879/1 dn=2 df=30 of=0 ri=3 ql=0 b=10
-  6 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-28 rp=788 dt=5847/1 dn=2 df=32 of=0 ri=0 ql=0 b=10
-  7 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-53 rp=1098 dt=6199/1 dn=2 df=30 of=0 ri=3 ql=0 b=10
+  0 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=10951/1 dn=0 df=0 of=0 ri=0 ql=0 b=10
+  1 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=16117/1 dn=0 df=13 of=0 ri=0 ql=0 b=10
+  2 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1445/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
+  3 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=6681/1 dn=0 df=9 of=0 ri=0 ql=0 b=10
+  4 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1003/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
+  5 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3887/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
+  6 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=859/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
+  7 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3761/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
 
 The first section lists the rcu_data structures for rcu, the second for
 rcu_bh.  Each section has one line per CPU, or eight for this 8-CPU system.
@@ -253,12 +254,6 @@ o	"pqc" indicates which grace period the last-observed quiescent
 o	"qp" indicates that RCU still expects a quiescent state from
 	this CPU.
 
-o	"rpfq" is the number of rcu_pending() calls on this CPU required
-	to induce this CPU to invoke force_quiescent_state().
-
-o	"rp" is low-order four hex digits of the count of how many times
-	rcu_pending() has been invoked on this CPU.
-
 o	"dt" is the current value of the dyntick counter that is incremented
 	when entering or leaving dynticks idle state, either by the
 	scheduler or by irq.  The number after the "/" is the interrupt
@@ -305,6 +300,9 @@ o	"b" is the batch limit for this CPU.  If more than this number
 	of RCU callbacks is ready to invoke, then the remainder will
 	be deferred.
 
+There is also an rcu/rcudata.csv file with the same information in
+comma-separated-variable spreadsheet format.
+
 
 The output of "cat rcu/rcugp" looks as follows:
 
@@ -411,3 +409,63 @@ o	Each element of the form "1/1 0:127 ^0" represents one struct
 		For example, the first entry at the lowest level shows
 		"^0", indicating that it corresponds to bit zero in
 		the first entry at the middle level.
+
+
+The output of "cat rcu/rcu_pending" looks as follows:
+
+rcu:
+  0 np=255892 qsp=53936 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741
+  1 np=261224 qsp=54638 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792
+  2 np=237496 qsp=49664 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629
+  3 np=236249 qsp=48766 cbr=0 cng=286 gpc=48049 gps=1218 nf=207 nn=137723
+  4 np=221310 qsp=46850 cbr=0 cng=26 gpc=43161 gps=4634 nf=3529 nn=123110
+  5 np=237332 qsp=48449 cbr=0 cng=54 gpc=47920 gps=3252 nf=201 nn=137456
+  6 np=219995 qsp=46718 cbr=0 cng=50 gpc=42098 gps=6093 nf=4202 nn=120834
+  7 np=249893 qsp=49390 cbr=0 cng=72 gpc=38400 gps=17102 nf=41 nn=144888
+rcu_bh:
+  0 np=146741 qsp=1419 cbr=0 cng=6 gpc=0 gps=0 nf=2 nn=145314
+  1 np=155792 qsp=12597 cbr=0 cng=0 gpc=4 gps=8 nf=3 nn=143180
+  2 np=136629 qsp=18680 cbr=0 cng=0 gpc=7 gps=6 nf=0 nn=117936
+  3 np=137723 qsp=2843 cbr=0 cng=0 gpc=10 gps=7 nf=0 nn=134863
+  4 np=123110 qsp=12433 cbr=0 cng=0 gpc=4 gps=2 nf=0 nn=110671
+  5 np=137456 qsp=4210 cbr=0 cng=0 gpc=6 gps=5 nf=0 nn=133235
+  6 np=120834 qsp=9902 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921
+  7 np=144888 qsp=26336 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542
+
+As always, this is once again split into "rcu" and "rcu_bh" portions.
+The fields are as follows:
+
+o	"np" is the number of times that __rcu_pending() has been invoked
+	for the corresponding flavor of RCU.
+
+o	"qsp" is the number of times that the RCU was waiting for a
+	quiescent state from this CPU.
+
+o	"cbr" is the number of times that this CPU had RCU callbacks
+	that had passed through a grace period, and were thus ready
+	to be invoked.
+
+o	"cng" is the number of times that this CPU needed another
+	grace period while RCU was idle.
+
+o	"gpc" is the number of times that an old grace period had
+	completed, but this CPU was not yet aware of it.
+
+o	"gps" is the number of times that a new grace period had started,
+	but this CPU was not yet aware of it.
+
+o	"nf" is the number of times that this CPU suspected that the
+	current grace period had run for too long, and thus needed to
+	be forced.
+
+	Please note that "forcing" consists of sending resched IPIs
+	to holdout CPUs.  If that CPU really still is in an old RCU
+	read-side critical section, then we really do have to wait for it.
+	The assumption behing "forcing" is that the CPU is not still in
+	an old RCU read-side critical section, but has not yet responded
+	for some other reason.
+
+o	"nn" is the number of times that this CPU needed nothing.  Alert
+	readers will note that the rcu "nn" number for a given CPU very
+	closely matches the rcu_bh "np" number for that same CPU.  This
+	is due to short-circuit evaluation in rcu_pending().
diff --git a/Documentation/SM501.txt b/Documentation/SM501.txt
index 6fc65603592..561826f8209 100644
--- a/Documentation/SM501.txt
+++ b/Documentation/SM501.txt
@@ -5,7 +5,7 @@ Copyright 2006, 2007 Simtec Electronics
 
 The Silicon Motion SM501 multimedia companion chip is a multifunction device
 which may provide numerous interfaces including USB host controller USB gadget,
-Asyncronous Serial ports, Audio functions and a dual display video interface.
+asynchronous serial ports, audio functions, and a dual display video interface.
 The device may be connected by PCI or local bus with varying functions enabled.
 
 Core
diff --git a/Documentation/Smack.txt b/Documentation/Smack.txt
index 629c92e9978..34614b4c708 100644
--- a/Documentation/Smack.txt
+++ b/Documentation/Smack.txt
@@ -184,8 +184,9 @@ length. Single character labels using special characters, that being anything
 other than a letter or digit, are reserved for use by the Smack development
 team. Smack labels are unstructured, case sensitive, and the only operation
 ever performed on them is comparison for equality. Smack labels cannot
-contain unprintable characters or the "/" (slash) character. Smack labels
-cannot begin with a '-', which is reserved for special options.
+contain unprintable characters, the "/" (slash), the "\" (backslash), the "'"
+(quote) and '"' (double-quote) characters.
+Smack labels cannot begin with a '-', which is reserved for special options.
 
 There are some predefined labels:
 
@@ -523,3 +524,18 @@ Smack supports some mount options:
 
 These mount options apply to all file system types.
 
+Smack auditing
+
+If you want Smack auditing of security events, you need to set CONFIG_AUDIT
+in your kernel configuration.
+By default, all denied events will be audited. You can change this behavior by
+writing a single character to the /smack/logging file :
+0 : no logging
+1 : log denied (default)
+2 : log accepted
+3 : log denied & accepted
+
+Events are logged as 'key=value' pairs, for each event you at least will get
+the subjet, the object, the rights requested, the action, the kernel function
+that triggered the event, plus other pairs depending on the type of event
+audited.
diff --git a/Documentation/SubmitChecklist b/Documentation/SubmitChecklist
index ac5e0b2f109..78a9168ff37 100644
--- a/Documentation/SubmitChecklist
+++ b/Documentation/SubmitChecklist
@@ -54,7 +54,7 @@ kernel patches.
     CONFIG_PREEMPT.
 
 14: If the patch affects IO/Disk, etc: has been tested with and without
-    CONFIG_LBD.
+    CONFIG_LBDAF.
 
 15: All codepaths have been exercised with all lockdep features enabled.
 
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index f309d3c6221..5c555a8b39e 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -91,6 +91,10 @@ Be as specific as possible.  The WORST descriptions possible include
 things like "update driver X", "bug fix for driver X", or "this patch
 includes updates for subsystem X.  Please apply."
 
+The maintainer will thank you if you write your patch description in a
+form which can be easily pulled into Linux's source code management
+system, git, as a "commit log".  See #15, below.
+
 If your description starts to get long, that's a sign that you probably
 need to split up your patch.  See #3, next.
 
@@ -183,8 +187,9 @@ Even if the maintainer did not respond in step #4, make sure to ALWAYS
 copy the maintainer when you change their code.
 
 For small patches you may want to CC the Trivial Patch Monkey
-trivial@kernel.org managed by Jesper Juhl; which collects "trivial"
-patches. Trivial patches must qualify for one of the following rules:
+trivial@kernel.org which collects "trivial" patches. Have a look
+into the MAINTAINERS file for its current manager.
+Trivial patches must qualify for one of the following rules:
  Spelling fixes in documentation
  Spelling fixes which could break grep(1)
  Warning fixes (cluttering with useless warnings is bad)
@@ -196,7 +201,6 @@ patches. Trivial patches must qualify for one of the following rules:
  since people copy, as long as it's trivial)
  Any fix by the author/maintainer of the file (ie. patch monkey
  in re-transmission mode)
-URL: <http://www.kernel.org/pub/linux/kernel/people/juhl/trivial/>
 
 
 
@@ -405,7 +409,14 @@ person it names.  This tag documents that potentially interested parties
 have been included in the discussion
 
 
-14) Using Tested-by: and Reviewed-by:
+14) Using Reported-by:, Tested-by: and Reviewed-by:
+
+If this patch fixes a problem reported by somebody else, consider adding a
+Reported-by: tag to credit the reporter for their contribution.  Please
+note that this tag should not be added without the reporter's permission,
+especially if the problem was not reported in a public forum.  That said,
+if we diligently credit our bug reporters, they will, hopefully, be
+inspired to help us again in the future.
 
 A Tested-by: tag indicates that the patch has been successfully tested (in
 some environment) by the person named.  This tag informs maintainers that
@@ -444,7 +455,7 @@ offer a Reviewed-by tag for a patch.  This tag serves to give credit to
 reviewers and to inform maintainers of the degree of review which has been
 done on the patch.  Reviewed-by: tags, when supplied by reviewers known to
 understand the subject area and to perform thorough reviews, will normally
-increase the liklihood of your patch getting into the kernel.
+increase the likelihood of your patch getting into the kernel.
 
 
 15) The canonical patch format
@@ -485,12 +496,33 @@ phrase" should not be a filename.  Do not use the same "summary
 phrase" for every patch in a whole patch series (where a "patch
 series" is an ordered sequence of multiple, related patches).
 
-Bear in mind that the "summary phrase" of your email becomes
-a globally-unique identifier for that patch.  It propagates
-all the way into the git changelog.  The "summary phrase" may
-later be used in developer discussions which refer to the patch.
-People will want to google for the "summary phrase" to read
-discussion regarding that patch.
+Bear in mind that the "summary phrase" of your email becomes a
+globally-unique identifier for that patch.  It propagates all the way
+into the git changelog.  The "summary phrase" may later be used in
+developer discussions which refer to the patch.  People will want to
+google for the "summary phrase" to read discussion regarding that
+patch.  It will also be the only thing that people may quickly see
+when, two or three months later, they are going through perhaps
+thousands of patches using tools such as "gitk" or "git log
+--oneline".
+
+For these reasons, the "summary" must be no more than 70-75
+characters, and it must describe both what the patch changes, as well
+as why the patch might be necessary.  It is challenging to be both
+succinct and descriptive, but that is what a well-written summary
+should do.
+
+The "summary phrase" may be prefixed by tags enclosed in square
+brackets: "Subject: [PATCH tag] <summary phrase>".  The tags are not
+considered part of the summary phrase, but describe how the patch
+should be treated.  Common tags might include a version descriptor if
+the multiple versions of the patch have been sent out in response to
+comments (i.e., "v1, v2, v3"), or "RFC" to indicate a request for
+comments.  If there are four patches in a patch series the individual
+patches may be numbered like this: 1/4, 2/4, 3/4, 4/4.  This assures
+that developers understand the order in which the patches should be
+applied and that they have reviewed or applied all of the patches in
+the patch series.
 
 A couple of example Subjects:
 
@@ -510,19 +542,31 @@ the patch author in the changelog.
 The explanation body will be committed to the permanent source
 changelog, so should make sense to a competent reader who has long
 since forgotten the immediate details of the discussion that might
-have led to this patch.
+have led to this patch.  Including symptoms of the failure which the
+patch addresses (kernel log messages, oops messages, etc.) is
+especially useful for people who might be searching the commit logs
+looking for the applicable patch.  If a patch fixes a compile failure,
+it may not be necessary to include _all_ of the compile failures; just
+enough that it is likely that someone searching for the patch can find
+it.  As in the "summary phrase", it is important to be both succinct as
+well as descriptive.
 
 The "---" marker line serves the essential purpose of marking for patch
 handling tools where the changelog message ends.
 
 One good use for the additional comments after the "---" marker is for
-a diffstat, to show what files have changed, and the number of inserted
-and deleted lines per file.  A diffstat is especially useful on bigger
-patches.  Other comments relevant only to the moment or the maintainer,
-not suitable for the permanent changelog, should also go here.
-Use diffstat options "-p 1 -w 70" so that filenames are listed from the
-top of the kernel source tree and don't use too much horizontal space
-(easily fit in 80 columns, maybe with some indentation).
+a diffstat, to show what files have changed, and the number of
+inserted and deleted lines per file.  A diffstat is especially useful
+on bigger patches.  Other comments relevant only to the moment or the
+maintainer, not suitable for the permanent changelog, should also go
+here.  A good example of such comments might be "patch changelogs"
+which describe what has changed between the v1 and v2 version of the
+patch.
+
+If you are going to include a diffstat after the "---" marker, please
+use diffstat options "-p 1 -w 70" so that filenames are listed from
+the top of the kernel source tree and don't use too much horizontal
+space (easily fit in 80 columns, maybe with some indentation).
 
 See more details on the proper patch format in the following
 references.
diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c
index 7ea231172c8..aa73e72fd79 100644
--- a/Documentation/accounting/getdelays.c
+++ b/Documentation/accounting/getdelays.c
@@ -246,7 +246,8 @@ void print_ioacct(struct taskstats *t)
 
 int main(int argc, char *argv[])
 {
-	int c, rc, rep_len, aggr_len, len2, cmd_type;
+	int c, rc, rep_len, aggr_len, len2;
+	int cmd_type = TASKSTATS_CMD_ATTR_UNSPEC;
 	__u16 id;
 	__u32 mypid;
 
diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
index ea7ccfc4b27..948c8718d96 100644
--- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt
+++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
@@ -51,7 +51,7 @@ PIN Numbers
 -----------
 
   Each pin has an unique number associated with it in regs-gpio.h,
-  eg S3C2410_GPA0 or S3C2410_GPF1. These defines are used to tell
+  eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
   the GPIO functions which pin is to be used.
 
 
@@ -65,11 +65,11 @@ Configuring a pin
 
   Eg:
 
-     s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
-     s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
+     s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
+     s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
 
-   which would turn GPA0 into the lowest Address line A0, and set
-   GPE8 to be connected to the SDIO/MMC controller's SDDAT1 line.
+   which would turn GPA(0) into the lowest Address line A0, and set
+   GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
 
 
 Reading the current configuration
diff --git a/Documentation/atomic_ops.txt b/Documentation/atomic_ops.txt
index 4ef24501045..396bec3b74e 100644
--- a/Documentation/atomic_ops.txt
+++ b/Documentation/atomic_ops.txt
@@ -229,10 +229,10 @@ kernel.  It is the use of atomic counters to implement reference
 counting, and it works such that once the counter falls to zero it can
 be guaranteed that no other entity can be accessing the object:
 
-static void obj_list_add(struct obj *obj)
+static void obj_list_add(struct obj *obj, struct list_head *head)
 {
 	obj->active = 1;
-	list_add(&obj->list);
+	list_add(&obj->list, head);
 }
 
 static void obj_list_del(struct obj *obj)
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index 6fab97ea7e6..8d2158a1c6a 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -186,7 +186,7 @@ a virtual address mapping (unlike the earlier scheme of virtual address
 do not have a corresponding kernel virtual address space mapping) and
 low-memory pages.
 
-Note: Please refer to Documentation/PCI/PCI-DMA-mapping.txt for a discussion
+Note: Please refer to Documentation/DMA-mapping.txt for a discussion
 on PCI high mem DMA aspects and mapping of scatter gather lists, and support
 for 64 bit PCI.
 
diff --git a/Documentation/block/deadline-iosched.txt b/Documentation/block/deadline-iosched.txt
index 72576769e0f..2d82c80322c 100644
--- a/Documentation/block/deadline-iosched.txt
+++ b/Documentation/block/deadline-iosched.txt
@@ -58,7 +58,7 @@ same criteria as reads.
 front_merges	(bool)
 ------------
 
-Sometimes it happens that a request enters the io scheduler that is contigious
+Sometimes it happens that a request enters the io scheduler that is contiguous
 with a request that is already on the queue. Either it fits in the back of that
 request, or it fits at the front. That is called either a back merge candidate
 or a front merge candidate. Due to the way files are typically laid out,
diff --git a/Documentation/braille-console.txt b/Documentation/braille-console.txt
index 000b0fbdc10..d0d042c2fd5 100644
--- a/Documentation/braille-console.txt
+++ b/Documentation/braille-console.txt
@@ -27,7 +27,7 @@ parameter.
 
 For simplicity, only one braille console can be enabled, other uses of
 console=brl,... will be discarded.  Also note that it does not interfere with
-the console selection mecanism described in serial-console.txt
+the console selection mechanism described in serial-console.txt
 
 For now, only the VisioBraille device is supported.
 
diff --git a/Documentation/cdrom/packet-writing.txt b/Documentation/cdrom/packet-writing.txt
index cf1f8126991..1c407778c8b 100644
--- a/Documentation/cdrom/packet-writing.txt
+++ b/Documentation/cdrom/packet-writing.txt
@@ -117,7 +117,7 @@ Using the pktcdvd debugfs interface
 
 To read pktcdvd device infos in human readable form, do:
 
-	# cat /debug/pktcdvd/pktcdvd[0-7]/info
+	# cat /sys/kernel/debug/pktcdvd/pktcdvd[0-7]/info
 
 For a description of the debugfs interface look into the file:
 
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index 1a608877b14..23d1262c077 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -152,14 +152,19 @@ When swap is accounted, following files are added.
 
 usage of mem+swap is limited by memsw.limit_in_bytes.
 
-Note: why 'mem+swap' rather than swap.
+* why 'mem+swap' rather than swap.
 The global LRU(kswapd) can swap out arbitrary pages. Swap-out means
 to move account from memory to swap...there is no change in usage of
-mem+swap.
+mem+swap. In other words, when we want to limit the usage of swap without
+affecting global LRU, mem+swap limit is better than just limiting swap from
+OS point of view.
 
-In other words, when we want to limit the usage of swap without affecting
-global LRU, mem+swap limit is better than just limiting swap from OS point
-of view.
+* What happens when a cgroup hits memory.memsw.limit_in_bytes
+When a cgroup his memory.memsw.limit_in_bytes, it's useless to do swap-out
+in this cgroup. Then, swap-out will not be done by cgroup routine and file
+caches are dropped. But as mentioned above, global LRU can do swapout memory
+from it for sanity of the system's memory management state. You can't forbid
+it by cgroup.
 
 2.5 Reclaim
 
@@ -204,6 +209,7 @@ We can alter the memory limit:
 
 NOTE: We can use a suffix (k, K, m, M, g or G) to indicate values in kilo,
 mega or gigabytes.
+NOTE: We can write "-1" to reset the *.limit_in_bytes(unlimited).
 
 # cat /cgroups/0/memory.limit_in_bytes
 4194304
diff --git a/Documentation/connector/cn_test.c b/Documentation/connector/cn_test.c
index 6977c178729..f688eba8770 100644
--- a/Documentation/connector/cn_test.c
+++ b/Documentation/connector/cn_test.c
@@ -41,6 +41,12 @@ void cn_test_callback(void *data)
 	       msg->seq, msg->ack, msg->len, (char *)msg->data);
 }
 
+/*
+ * Do not remove this function even if no one is using it as
+ * this is an example of how to get notifications about new
+ * connector user registration
+ */
+#if 0
 static int cn_test_want_notify(void)
 {
 	struct cn_ctl_msg *ctl;
@@ -117,6 +123,7 @@ nlmsg_failure:
 	kfree_skb(skb);
 	return -EINVAL;
 }
+#endif
 
 static u32 cn_test_timer_counter;
 static void cn_test_timer_func(unsigned long __data)
diff --git a/Documentation/cpu-freq/cpu-drivers.txt b/Documentation/cpu-freq/cpu-drivers.txt
index 43c743903dd..75a58d14d3c 100644
--- a/Documentation/cpu-freq/cpu-drivers.txt
+++ b/Documentation/cpu-freq/cpu-drivers.txt
@@ -155,7 +155,7 @@ actual frequency must be determined using the following rules:
 - if relation==CPUFREQ_REL_H, try to select a new_freq lower than or equal
   target_freq. ("H for highest, but no higher than")
 
-Here again the frequency table helper might assist you - see section 3
+Here again the frequency table helper might assist you - see section 2
 for details.
 
 
diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt
index ce73f3eb5dd..aed082f49d0 100644
--- a/Documentation/cpu-freq/governors.txt
+++ b/Documentation/cpu-freq/governors.txt
@@ -119,10 +119,6 @@ want the kernel to look at the CPU usage and to make decisions on
 what to do about the frequency.  Typically this is set to values of
 around '10000' or more. It's default value is (cmp. with users-guide.txt):
 transition_latency * 1000
-The lowest value you can set is:
-transition_latency * 100 or it may get restricted to a value where it
-makes not sense for the kernel anymore to poll that often which depends
-on your HZ config variable (HZ=1000: max=20000us, HZ=250: max=5000).
 Be aware that transition latency is in ns and sampling_rate is in us, so you
 get the same sysfs value by default.
 Sampling rate should always get adjusted considering the transition latency
@@ -131,14 +127,20 @@ in the bash (as said, 1000 is default), do:
 echo `$(($(cat cpuinfo_transition_latency) * 750 / 1000)) \
     >ondemand/sampling_rate
 
-show_sampling_rate_(min|max): THIS INTERFACE IS DEPRECATED, DON'T USE IT.
-You can use wider ranges now and the general
-cpuinfo_transition_latency variable (cmp. with user-guide.txt) can be
-used to obtain exactly the same info:
-show_sampling_rate_min = transtition_latency * 500    / 1000
-show_sampling_rate_max = transtition_latency * 500000 / 1000
-(divided by 1000 is to illustrate that sampling rate is in us and
-transition latency is exported ns).
+show_sampling_rate_min:
+The sampling rate is limited by the HW transition latency:
+transition_latency * 100
+Or by kernel restrictions:
+If CONFIG_NO_HZ is set, the limit is 10ms fixed.
+If CONFIG_NO_HZ is not set or no_hz=off boot parameter is used, the
+limits depend on the CONFIG_HZ option:
+HZ=1000: min=20000us  (20ms)
+HZ=250:  min=80000us  (80ms)
+HZ=100:  min=200000us (200ms)
+The highest value of kernel and HW latency restrictions is shown and
+used as the minimum sampling rate.
+
+show_sampling_rate_max: THIS INTERFACE IS DEPRECATED, DON'T USE IT.
 
 up_threshold: defines what the average CPU usage between the samplings
 of 'sampling_rate' needs to be for the kernel to make a decision on
diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt
index 75f41193f3e..5d5f5fadd1c 100644
--- a/Documentation/cpu-freq/user-guide.txt
+++ b/Documentation/cpu-freq/user-guide.txt
@@ -31,7 +31,6 @@ Contents:
 
 3. How to change the CPU cpufreq policy and/or speed
 3.1 Preferred interface: sysfs
-3.2 Deprecated interfaces
 
 
 
diff --git a/Documentation/dell_rbu.txt b/Documentation/dell_rbu.txt
index c11b931f8f9..15174985ad0 100644
--- a/Documentation/dell_rbu.txt
+++ b/Documentation/dell_rbu.txt
@@ -76,9 +76,9 @@ Do the steps below to download the BIOS image.
 
 The /sys/class/firmware/dell_rbu/ entries will remain till the following is
 done.
-echo -1 > /sys/class/firmware/dell_rbu/loading.
+echo -1 > /sys/class/firmware/dell_rbu/loading
 Until this step is completed the driver cannot be unloaded.
-Also echoing either mono ,packet or init in to image_type will free up the
+Also echoing either mono, packet or init in to image_type will free up the
 memory allocated by the driver.
 
 If a user by accident executes steps 1 and 3 above without executing step 2;
diff --git a/Documentation/development-process/5.Posting b/Documentation/development-process/5.Posting
index dd48132a74d..f622c1e9f0f 100644
--- a/Documentation/development-process/5.Posting
+++ b/Documentation/development-process/5.Posting
@@ -119,7 +119,7 @@ which takes quite a bit of time and thought after the "real work" has been
 done.  When done properly, though, it is time well spent.
 
 
-5.4: PATCH FORMATTING
+5.4: PATCH FORMATTING AND CHANGELOGS
 
 So now you have a perfect series of patches for posting, but the work is
 not done quite yet.  Each patch needs to be formatted into a message which
@@ -146,8 +146,33 @@ that end, each patch will be composed of the following:
  - One or more tag lines, with, at a minimum, one Signed-off-by: line from
    the author of the patch.  Tags will be described in more detail below.
 
-The above three items should, normally, be the text used when committing
-the change to a revision control system.  They are followed by:
+The items above, together, form the changelog for the patch.  Writing good
+changelogs is a crucial but often-neglected art; it's worth spending
+another moment discussing this issue.  When writing a changelog, you should
+bear in mind that a number of different people will be reading your words.
+These include subsystem maintainers and reviewers who need to decide
+whether the patch should be included, distributors and other maintainers
+trying to decide whether a patch should be backported to other kernels, bug
+hunters wondering whether the patch is responsible for a problem they are
+chasing, users who want to know how the kernel has changed, and more.  A
+good changelog conveys the needed information to all of these people in the
+most direct and concise way possible.
+
+To that end, the summary line should describe the effects of and motivation
+for the change as well as possible given the one-line constraint.  The
+detailed description can then amplify on those topics and provide any
+needed additional information.  If the patch fixes a bug, cite the commit
+which introduced the bug if possible.  If a problem is associated with
+specific log or compiler output, include that output to help others
+searching for a solution to the same problem.  If the change is meant to
+support other changes coming in later patch, say so.  If internal APIs are
+changed, detail those changes and how other developers should respond.  In
+general, the more you can put yourself into the shoes of everybody who will
+be reading your changelog, the better that changelog (and the kernel as a
+whole) will be.
+
+Needless to say, the changelog should be the text used when committing the
+change to a revision control system.  It will be followed by:
 
  - The patch itself, in the unified ("-u") patch format.  Using the "-p"
    option to diff will associate function names with changes, making the
diff --git a/Documentation/driver-model/device.txt b/Documentation/driver-model/device.txt
index a7cbfff40d0..a124f3126b0 100644
--- a/Documentation/driver-model/device.txt
+++ b/Documentation/driver-model/device.txt
@@ -162,3 +162,35 @@ device_remove_file(dev,&dev_attr_power);
 
 The file name will be 'power' with a mode of 0644 (-rw-r--r--).
 
+Word of warning:  While the kernel allows device_create_file() and
+device_remove_file() to be called on a device at any time, userspace has
+strict expectations on when attributes get created.  When a new device is
+registered in the kernel, a uevent is generated to notify userspace (like
+udev) that a new device is available.  If attributes are added after the
+device is registered, then userspace won't get notified and userspace will
+not know about the new attributes.
+
+This is important for device driver that need to publish additional
+attributes for a device at driver probe time.  If the device driver simply
+calls device_create_file() on the device structure passed to it, then
+userspace will never be notified of the new attributes.  Instead, it should
+probably use class_create() and class->dev_attrs to set up a list of
+desired attributes in the modules_init function, and then in the .probe()
+hook, and then use device_create() to create a new device as a child
+of the probed device.  The new device will generate a new uevent and
+properly advertise the new attributes to userspace.
+
+For example, if a driver wanted to add the following attributes:
+struct device_attribute mydriver_attribs[] = {
+	__ATTR(port_count, 0444, port_count_show),
+	__ATTR(serial_number, 0444, serial_number_show),
+	NULL
+};
+
+Then in the module init function is would do:
+	mydriver_class = class_create(THIS_MODULE, "my_attrs");
+	mydriver_class.dev_attr = mydriver_attribs;
+
+And assuming 'dev' is the struct device passed into the probe hook, the driver
+probe function would do something like:
+	create_device(&mydriver_class, dev, chrdev, &private_data, "my_name");
diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt
index 387b8a720f4..d79aead9418 100644
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@@ -188,7 +188,7 @@ For example, you can do something like the following.
 
   void my_midlayer_destroy_something()
   {
-	devres_release_group(dev, my_midlayer_create_soemthing);
+	devres_release_group(dev, my_midlayer_create_something);
   }
 
 
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index 2f21ecd4c20..a52adfc9a57 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -112,7 +112,7 @@ sub tda10045 {
 
 sub tda10046 {
 	my $sourcefile = "TT_PCI_2.19h_28_11_2006.zip";
-	my $url = "http://technotrend-online.com/download/software/219/$sourcefile";
+	my $url = "http://www.tt-download.com/download/updates/219/$sourcefile";
 	my $hash = "6a7e1e2f2644b162ff0502367553c72d";
 	my $outfile = "dvb-fe-tda10046.fw";
 	my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
@@ -129,8 +129,8 @@ sub tda10046 {
 }
 
 sub tda10046lifeview {
-    my $sourcefile = "Drv_2.11.02.zip";
-    my $url = "http://www.lifeview.com.tw/drivers/pci_card/FlyDVB-T/$sourcefile";
+    my $sourcefile = "7%5Cdrv_2.11.02.zip";
+    my $url = "http://www.lifeview.hk/dbimages/document/$sourcefile";
     my $hash = "1ea24dee4eea8fe971686981f34fd2e0";
     my $outfile = "dvb-fe-tda10046.fw";
     my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
@@ -317,7 +317,7 @@ sub nxt2002 {
 
 sub nxt2004 {
     my $sourcefile = "AVerTVHD_MCE_A180_Drv_v1.2.2.16.zip";
-    my $url = "http://www.aver.com/support/Drivers/$sourcefile";
+    my $url = "http://www.avermedia-usa.com/support/Drivers/$sourcefile";
     my $hash = "111cb885b1e009188346d72acfed024c";
     my $outfile = "dvb-fe-nxt2004.fw";
     my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
diff --git a/Documentation/edac.txt b/Documentation/edac.txt
index 8eda3fb6641..06f8f46692d 100644
--- a/Documentation/edac.txt
+++ b/Documentation/edac.txt
@@ -23,8 +23,8 @@ first time, it was renamed to 'EDAC'.
 The bluesmoke project at sourceforge.net is now utilized as a 'staging area'
 for EDAC development, before it is sent upstream to kernel.org
 
-At the bluesmoke/EDAC project site, is a series of quilt patches against
-recent kernels, stored in a SVN respository. For easier downloading, there
+At the bluesmoke/EDAC project site is a series of quilt patches against
+recent kernels, stored in a SVN repository. For easier downloading, there
 is also a tarball snapshot available.
 
 ============================================================================
@@ -73,9 +73,9 @@ the vendor should tie the parity status bits to 0 if they do not intend
 to generate parity.  Some vendors do not do this, and thus the parity bit
 can "float" giving false positives.
 
-In the kernel there is a pci device attribute located in sysfs that is
+In the kernel there is a PCI device attribute located in sysfs that is
 checked by the EDAC PCI scanning code. If that attribute is set,
-PCI parity/error scannining is skipped for that device. The attribute
+PCI parity/error scanning is skipped for that device. The attribute
 is:
 
 	broken_parity_status
diff --git a/Documentation/fault-injection/fault-injection.txt b/Documentation/fault-injection/fault-injection.txt
index 4bc374a1434..07930564079 100644
--- a/Documentation/fault-injection/fault-injection.txt
+++ b/Documentation/fault-injection/fault-injection.txt
@@ -29,16 +29,16 @@ o debugfs entries
 fault-inject-debugfs kernel module provides some debugfs entries for runtime
 configuration of fault-injection capabilities.
 
-- /debug/fail*/probability:
+- /sys/kernel/debug/fail*/probability:
 
 	likelihood of failure injection, in percent.
 	Format: <percent>
 
 	Note that one-failure-per-hundred is a very high error rate
 	for some testcases.  Consider setting probability=100 and configure
-	/debug/fail*/interval for such testcases.
+	/sys/kernel/debug/fail*/interval for such testcases.
 
-- /debug/fail*/interval:
+- /sys/kernel/debug/fail*/interval:
 
 	specifies the interval between failures, for calls to
 	should_fail() that pass all the other tests.
@@ -46,18 +46,18 @@ configuration of fault-injection capabilities.
 	Note that if you enable this, by setting interval>1, you will
 	probably want to set probability=100.
 
-- /debug/fail*/times:
+- /sys/kernel/debug/fail*/times:
 
 	specifies how many times failures may happen at most.
 	A value of -1 means "no limit".
 
-- /debug/fail*/space:
+- /sys/kernel/debug/fail*/space:
 
 	specifies an initial resource "budget", decremented by "size"
 	on each call to should_fail(,size).  Failure injection is
 	suppressed until "space" reaches zero.
 
-- /debug/fail*/verbose
+- /sys/kernel/debug/fail*/verbose
 
 	Format: { 0 | 1 | 2 }
 	specifies the verbosity of the messages when failure is
@@ -65,17 +65,17 @@ configuration of fault-injection capabilities.
 	log line per failure; '2' will print a call trace too -- useful
 	to debug the problems revealed by fault injection.
 
-- /debug/fail*/task-filter:
+- /sys/kernel/debug/fail*/task-filter:
 
 	Format: { 'Y' | 'N' }
 	A value of 'N' disables filtering by process (default).
 	Any positive value limits failures to only processes indicated by
 	/proc/<pid>/make-it-fail==1.
 
-- /debug/fail*/require-start:
-- /debug/fail*/require-end:
-- /debug/fail*/reject-start:
-- /debug/fail*/reject-end:
+- /sys/kernel/debug/fail*/require-start:
+- /sys/kernel/debug/fail*/require-end:
+- /sys/kernel/debug/fail*/reject-start:
+- /sys/kernel/debug/fail*/reject-end:
 
 	specifies the range of virtual addresses tested during
 	stacktrace walking.  Failure is injected only if some caller
@@ -84,26 +84,26 @@ configuration of fault-injection capabilities.
 	Default required range is [0,ULONG_MAX) (whole of virtual address space).
 	Default rejected range is [0,0).
 
-- /debug/fail*/stacktrace-depth:
+- /sys/kernel/debug/fail*/stacktrace-depth:
 
 	specifies the maximum stacktrace depth walked during search
 	for a caller within [require-start,require-end) OR
 	[reject-start,reject-end).
 
-- /debug/fail_page_alloc/ignore-gfp-highmem:
+- /sys/kernel/debug/fail_page_alloc/ignore-gfp-highmem:
 
 	Format: { 'Y' | 'N' }
 	default is 'N', setting it to 'Y' won't inject failures into
 	highmem/user allocations.
 
-- /debug/failslab/ignore-gfp-wait:
-- /debug/fail_page_alloc/ignore-gfp-wait:
+- /sys/kernel/debug/failslab/ignore-gfp-wait:
+- /sys/kernel/debug/fail_page_alloc/ignore-gfp-wait:
 
 	Format: { 'Y' | 'N' }
 	default is 'N', setting it to 'Y' will inject failures
 	only into non-sleep allocations (GFP_ATOMIC allocations).
 
-- /debug/fail_page_alloc/min-order:
+- /sys/kernel/debug/fail_page_alloc/min-order:
 
 	specifies the minimum page allocation order to be injected
 	failures.
@@ -166,13 +166,13 @@ o Inject slab allocation failures into module init/exit code
 #!/bin/bash
 
 FAILTYPE=failslab
-echo Y > /debug/$FAILTYPE/task-filter
-echo 10 > /debug/$FAILTYPE/probability
-echo 100 > /debug/$FAILTYPE/interval
-echo -1 > /debug/$FAILTYPE/times
-echo 0 > /debug/$FAILTYPE/space
-echo 2 > /debug/$FAILTYPE/verbose
-echo 1 > /debug/$FAILTYPE/ignore-gfp-wait
+echo Y > /sys/kernel/debug/$FAILTYPE/task-filter
+echo 10 > /sys/kernel/debug/$FAILTYPE/probability
+echo 100 > /sys/kernel/debug/$FAILTYPE/interval
+echo -1 > /sys/kernel/debug/$FAILTYPE/times
+echo 0 > /sys/kernel/debug/$FAILTYPE/space
+echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
+echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
 
 faulty_system()
 {
@@ -217,20 +217,20 @@ then
 	exit 1
 fi
 
-cat /sys/module/$module/sections/.text > /debug/$FAILTYPE/require-start
-cat /sys/module/$module/sections/.data > /debug/$FAILTYPE/require-end
+cat /sys/module/$module/sections/.text > /sys/kernel/debug/$FAILTYPE/require-start
+cat /sys/module/$module/sections/.data > /sys/kernel/debug/$FAILTYPE/require-end
 
-echo N > /debug/$FAILTYPE/task-filter
-echo 10 > /debug/$FAILTYPE/probability
-echo 100 > /debug/$FAILTYPE/interval
-echo -1 > /debug/$FAILTYPE/times
-echo 0 > /debug/$FAILTYPE/space
-echo 2 > /debug/$FAILTYPE/verbose
-echo 1 > /debug/$FAILTYPE/ignore-gfp-wait
-echo 1 > /debug/$FAILTYPE/ignore-gfp-highmem
-echo 10 > /debug/$FAILTYPE/stacktrace-depth
+echo N > /sys/kernel/debug/$FAILTYPE/task-filter
+echo 10 > /sys/kernel/debug/$FAILTYPE/probability
+echo 100 > /sys/kernel/debug/$FAILTYPE/interval
+echo -1 > /sys/kernel/debug/$FAILTYPE/times
+echo 0 > /sys/kernel/debug/$FAILTYPE/space
+echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
+echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
+echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-highmem
+echo 10 > /sys/kernel/debug/$FAILTYPE/stacktrace-depth
 
-trap "echo 0 > /debug/$FAILTYPE/probability" SIGINT SIGTERM EXIT
+trap "echo 0 > /sys/kernel/debug/$FAILTYPE/probability" SIGINT SIGTERM EXIT
 
 echo "Injecting errors into the module $module... (interrupt to stop)"
 sleep 1000000
diff --git a/Documentation/fb/sh7760fb.txt b/Documentation/fb/sh7760fb.txt
index c87bfe5c630..b994c3b1054 100644
--- a/Documentation/fb/sh7760fb.txt
+++ b/Documentation/fb/sh7760fb.txt
@@ -1,7 +1,7 @@
 SH7760/SH7763 integrated LCDC Framebuffer driver
 ================================================
 
-0. Overwiew
+0. Overview
 -----------
 The SH7760/SH7763 have an integrated LCD Display controller (LCDC) which
 supports (in theory) resolutions ranging from 1x1 to 1024x1024,
diff --git a/Documentation/fb/vesafb.txt b/Documentation/fb/vesafb.txt
index ee277dd204b..950d5a658cb 100644
--- a/Documentation/fb/vesafb.txt
+++ b/Documentation/fb/vesafb.txt
@@ -95,7 +95,7 @@ There is no way to change the vesafb video mode and/or timings after
 booting linux.  If you are not happy with the 60 Hz refresh rate, you
 have these options:
 
- * configure and load the DOS-Tools for your the graphics board (if
+ * configure and load the DOS-Tools for the graphics board (if
    available) and boot linux with loadlin.
  * use a native driver (matroxfb/atyfb) instead if vesafb.  If none
    is available, write a new one!
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index de491a3e231..f8cd450be9a 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -6,6 +6,20 @@ be removed from this file.
 
 ---------------------------
 
+What:	IRQF_SAMPLE_RANDOM
+Check:	IRQF_SAMPLE_RANDOM
+When:	July 2009
+
+Why:	Many of IRQF_SAMPLE_RANDOM users are technically bogus as entropy
+	sources in the kernel's current entropy model. To resolve this, every
+	input point to the kernel's entropy pool needs to better document the
+	type of entropy source it actually is. This will be replaced with
+	additional add_*_randomness functions in drivers/char/random.c
+
+Who:	Robin Getz <rgetz@blackfin.uclinux.org> & Matt Mackall <mpm@selenic.com>
+
+---------------------------
+
 What:	The ieee80211_regdom module parameter
 When:	March 2010 / desktop catchup
 
@@ -354,16 +368,6 @@ Who:  Krzysztof Piotr Oledzki <ole@ans.pl>
 
 ---------------------------
 
-What:	i2c_attach_client(), i2c_detach_client(), i2c_driver->detach_client(),
-	i2c_adapter->client_register(), i2c_adapter->client_unregister
-When:	2.6.30
-Check:	i2c_attach_client i2c_detach_client
-Why:	Deprecated by the new (standard) device driver binding model. Use
-	i2c_driver->probe() and ->remove() instead.
-Who:	Jean Delvare <khali@linux-fr.org>
-
----------------------------
-
 What:	fscher and fscpos drivers
 When:	June 2009
 Why:	Deprecated by the new fschmd driver.
@@ -437,3 +441,20 @@ Why:	Superseded by tdfxfb. I2C/DDC support used to live in a separate
 	driver but this caused driver conflicts.
 Who:	Jean Delvare <khali@linux-fr.org>
 	Krzysztof Helt <krzysztof.h1@wp.pl>
+
+---------------------------
+
+What:	CONFIG_RFKILL_INPUT
+When:	2.6.33
+Why:	Should be implemented in userspace, policy daemon.
+Who:	Johannes Berg <johannes@sipsolutions.net>
+
+----------------------------
+
+What:	CONFIG_X86_OLD_MCE
+When:	2.6.32
+Why:	Remove the old legacy 32bit machine check code. This has been
+	superseded by the newer machine check code from the 64bit port,
+	but the old version has been kept around for easier testing. Note this
+	doesn't impact the old P5 and WinChip machine check handlers.
+Who:	Andi Kleen <andi@firstfloor.org>
diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX
index 8dd6db76171..f15621ee559 100644
--- a/Documentation/filesystems/00-INDEX
+++ b/Documentation/filesystems/00-INDEX
@@ -66,6 +66,10 @@ mandatory-locking.txt
 	- info on the Linux implementation of Sys V mandatory file locking.
 ncpfs.txt
 	- info on Novell Netware(tm) filesystem using NCP protocol.
+nfs41-server.txt
+	- info on the Linux server implementation of NFSv4 minor version 1.
+nfs-rdma.txt
+	- how to install and setup the Linux NFS/RDMA client and server software.
 nfsroot.txt
 	- short guide on setting up a diskless box with NFS root filesystem.
 nilfs2.txt
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index 3120f8dd2c3..229d7b7c50a 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -187,7 +187,7 @@ readpages:		no
 write_begin:		no	locks the page		yes
 write_end:		no	yes, unlocks		yes
 perform_write:		no	n/a			yes
-bmap:			yes
+bmap:			no
 invalidatepage:		no	yes
 releasepage:		no	yes
 direct_IO:		no
diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt
index c6341745df3..8f78ded4b64 100644
--- a/Documentation/filesystems/autofs4-mount-control.txt
+++ b/Documentation/filesystems/autofs4-mount-control.txt
@@ -369,7 +369,7 @@ The call requires an initialized struct autofs_dev_ioctl. There are two
 possible variations. Both use the path field set to the path of the mount
 point to check and the size field adjusted appropriately. One uses the
 ioctlfd field to identify a specific mount point to check while the other
-variation uses the path and optionaly arg1 set to an autofs mount type.
+variation uses the path and optionally arg1 set to an autofs mount type.
 The call returns 1 if this is a mount point and sets arg1 to the device
 number of the mount and field arg2 to the relevant super block magic
 number (described below) or 0 if it isn't a mountpoint. In both cases
diff --git a/Documentation/filesystems/caching/netfs-api.txt b/Documentation/filesystems/caching/netfs-api.txt
index 4db125b3a5c..2666b1ed5e9 100644
--- a/Documentation/filesystems/caching/netfs-api.txt
+++ b/Documentation/filesystems/caching/netfs-api.txt
@@ -184,7 +184,7 @@ This has the following fields:
      have index children.
 
      If this function is not supplied or if it returns NULL then the first
-     cache in the parent's list will be chosed, or failing that, the first
+     cache in the parent's list will be chosen, or failing that, the first
      cache in the master list.
 
  (4) A function to retrieve an object's key from the netfs [mandatory].
diff --git a/Documentation/filesystems/debugfs.txt b/Documentation/filesystems/debugfs.txt
new file mode 100644