Age | Commit message (Collapse) | Author |
|
Note that these are distinct from TargetInstrInfo::INSERT_SUBREG
and TargetInstrInfo::EXTRACT_SUBREG, which are used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68355 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
explicitly flush it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67526 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
unnecessary paddings between constant pool entries, larger than necessary alignments (e.g. 8 byte alignment for .literal4 sections), and potentially other issues.
1. ConstantPoolSDNode alignment field is log2 value of the alignment requirement. This is not consistent with other SDNode variants.
2. MachineConstantPool alignment field is also a log2 value.
3. However, some places are creating ConstantPoolSDNode with alignment value rather than log2 values. This creates entries with artificially large alignments, e.g. 256 for SSE vector values.
4. Constant pool entry offsets are computed when they are created. However, asm printer group them by sections. That means the offsets are no longer valid. However, asm printer uses them to determine size of padding between entries.
5. Asm printer uses expensive data structure multimap to track constant pool entries by sections.
6. Asm printer iterate over SmallPtrSet when it's emitting constant pool entries. This is non-deterministic.
Solutions:
1. ConstantPoolSDNode alignment field is changed to keep non-log2 value.
2. MachineConstantPool alignment field is also changed to keep non-log2 value.
3. Functions that create ConstantPool nodes are passing in non-log2 alignments.
4. MachineConstantPoolEntry no longer keeps an offset field. It's replaced with an alignment field. Offsets are not computed when constant pool entries are created. They are computed on the fly in asm printer and JIT.
5. Asm printer uses cheaper data structure to group constant pool entries.
6. Asm printer compute entry offsets after grouping is done.
7. Change JIT code to compute entry offsets on the fly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66875 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66867 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66866 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
It is an error to call APInt::zext with a size that is equal to the value's
current size, so use zextOrTrunc instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66039 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
arbitrary vector sizes. Add an optional MinSplatBits parameter to specify
a minimum for the splat element size. Update the PPC target to use the
revised interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65899 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
method in a BuildVectorSDNode "pseudo-class".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65747 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65482 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65427 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
results via reference parameters.
This patch also appears to fix Evan's reported problem supplied as a
reduced bugpoint test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65426 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
ashr instcombine to help expose this code. And apply the fix to
SelectionDAG's copy of this code too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65364 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
instruction. The class also consolidates the code for detecting constant
splats that's shared across PowerPC and the CellSPU backends (and might be
useful for other backends.) Also introduces SelectionDAG::getBUID_VECTOR() for
generating new BUILD_VECTOR nodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65296 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
(Note: Eventually, commits like this will be handled via a pre-commit hook that
does this automagically, as well as expand tabs to spaces and look for 80-col
violations.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64827 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
No functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64026 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Adjust derived classes to pass UnknownLoc where
a DebugLoc does not make sense. Pick one of
DebugLoc and non-DebugLoc variants to survive
for all such classes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64000 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63995 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Many targets build placeholder nodes for special operands, e.g.
GlobalBaseReg on X86 and PPC for the PIC base. There's no
sensible way to associate debug info with these. I've left
them built with getNode calls with explicit DebugLoc::getUnknownLoc operands.
I'm not too happy about this but don't see a good improvement;
I considered adding a getPseudoOperand or something, but it
seems to me that'll just make it harder to read.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63992 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
getCALLSEQ_{END,START} to permit passing no DebugLoc
there. UNDEF doesn't logically have DebugLoc; add
getUNDEF to encapsulate this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63978 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63969 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63951 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63909 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
its corresponding getTargetNode. Lots of
caller changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63904 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63889 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63886 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
between a unsigned integer and signed integer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63831 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63808 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63800 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Adjust callers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63789 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63768 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Adjust the many callers of those versions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63767 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
support GraphViz, I've been using the foo->dump() facility. This
patch is a minor rewrite to the SelectionDAG dump() stuff to make it a
little more helpful. The existing foo->dump() functionality does not
change; this patch adds foo->dumpr(). All of this is only useful when
running LLVM under a debugger.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63736 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
of Lod and Sto; patch uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63716 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
functions, with callers adjusted to fit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63705 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
functions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63703 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
from SelectionDagBuild.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63680 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
have it yet. More coming.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63673 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Duncan spotted this. Thanks!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63641 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63595 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
into SimplifySetCC which gets called elsewhere.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63583 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
information. This eliminates the need for the Flags field in MemSDNode,
so this makes LoadSDNode and StoreSDNode smaller. Also, it makes
FoldingSetNodeIDs for loads and stores two AddIntegers smaller.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63577 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63545 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
crashes or wrong code with codegen of large integers:
eliminate the legacy getIntegerVTBitMask and
getIntegerVTSignBit methods, which returned their
value as a uint64_t, so couldn't handle huge types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63494 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
returned by getShiftAmountTy may be too small
to hold shift values (it is an i8 on x86-32).
Before and during type legalization, use a large
but legal type for shift amounts: getPointerTy;
afterwards use getShiftAmountTy, fixing up any
shift amounts with a big type during operation
legalization. Thanks to Dan for writing the
original patch (which I shamelessly pillaged).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63482 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
when A==B, -0.0 != +0.0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63474 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
argument. Adjust all callers and overloaded versions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63444 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63442 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63434 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63433 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
the element indices may be equal if either one is not a
constant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63311 91177308-0d34-0410-b5e6-96231b3b80d8
|