Age | Commit message (Collapse) | Author |
|
field, which is otherwise unused after instruction selection, as an index
into the SUnit array.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52583 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
to DenseMap<SDNode*, SUnit*>, and adjust the way cloned SUnit nodes are
handled so that only the original node needs to be in the map.
This speeds up llc on 447.dealII.llvm.bc by about 2%.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52576 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
ScheduleDAG; they don't correspond to any actual instructions so they
don't need to be scheduled.
This fixes a bug where the EntryToken was being scheduled multiple
times in some cases, though it ended up not causing any trouble because
EntryToken doesn't expand into anything. With this fixed the schedulers
reliably schedule the expected number of units, so we can check this
with an assertion.
This requires a tweak to test/CodeGen/X86/loop-hoist.ll because it
ends up getting scheduled differently in a trivial way, though it was
enough to fool the prcontext+grep that the test does.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49701 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46930 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46514 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
that "machine" classes are used to represent the current state of
the code being compiled. Given this expanded name, we can start
moving other stuff into it. For now, move the UsedPhysRegs and
LiveIn/LoveOuts vectors from MachineFunction into it.
Update all the clients to match.
This also reduces some needless #includes, such as MachineModuleInfo
from MachineFunction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45467 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45418 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43017 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42442 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
physical register dependency. The BURR scheduler can now backtrace and duplicate instructions in order to avoid "expensive / impossible to copy" values (e.g. status flag EFLAGS for x86) from being clobbered.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42284 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
in tracking physical register output dependencies.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42125 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Change name of -sched option and DEBUG_TYPE to
pre-RA-sched; adjust testcases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@39816 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
speeds up isel as a whole time by 2.6%.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33810 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32698 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32320 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
is 'unsigned'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32279 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31453 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29911 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This reduces selectiondag time on kc++ from 5.43s to 4.98s (9%). More
significantly, this speeds up the default ppc scheduler from ~1571ms to 1063ms,
a 33% speedup.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29743 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29471 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
2. Added argument to instruction scheduler creators so the creators can do
special things.
3. Repaired target hazard code.
4. Misc.
More to follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29450 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29434 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29220 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28973 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
non-deterministic. Returns NULL when it's empty!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28560 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
TargetData.h. This should make recompiles a bit faster with my current
TargetData tinkering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28238 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
separate file. Added an initial implementation of top-down register pressure
reduction list scheduler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28226 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28212 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
the distance between the def and another use is much longer). This is under
option control for now "-sched-lower-defnuse".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28201 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28117 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
scheduler can go into a "vertical mode" (i.e. traversing up the two-address
chain, etc.) when the register pressure is low.
This does seem to reduce the number of spills in the cases I've looked at. But
with x86, it's no guarantee the performance of the code improves.
It can be turned on with -sched-vertically option.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28108 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
the heuristic to further reduce spills for several test cases. (Note, it may
not necessarily translate to runtime win!)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28076 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28035 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
up the schedule. This helps code that looks like this:
loads ...
computations (first set) ...
stores (first set) ...
loads
computations (seccond set) ...
stores (seccond set) ...
Without this change, the stores and computations are more likely to
interleave:
loads ...
loads ...
computations (first set) ...
computations (second set) ...
computations (first set) ...
stores (first set) ...
computations (second set) ...
stores (stores set) ...
This can increase the number of spills if we are unlucky.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28033 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28030 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
performance regressions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28029 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
instructions
to be emitted.
Don't add one to the latency of a completed instruction if the latency of the
op is 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26718 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
predecessor to finish before they can start.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26717 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
operands have all issued, but whose results are not yet available. This
allows us to compile:
int G;
int test(int A, int B, int* P) {
return (G+A)*(B+1);
}
to:
_test:
lis r2, ha16(L_G$non_lazy_ptr)
addi r4, r4, 1
lwz r2, lo16(L_G$non_lazy_ptr)(r2)
lwz r2, 0(r2)
add r2, r2, r3
mullw r3, r2, r4
blr
instead of this, which has a stall between the lis/lwz:
_test:
lis r2, ha16(L_G$non_lazy_ptr)
lwz r2, lo16(L_G$non_lazy_ptr)(r2)
addi r4, r4, 1
lwz r2, 0(r2)
add r2, r2, r3
mullw r3, r2, r4
blr
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26716 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
which cycle it lands on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26714 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26713 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
is together, and direction independent code is together.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26712 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
merge succs/chainsuccs -> succs set
This has no functionality change, simplifies the code, and reduces the size
of sunits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26711 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26690 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26687 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26686 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26684 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26683 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26682 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
keep track of a sense of "mobility", i.e. how many other nodes scheduling one
node will free up. For something like this:
float testadd(float *X, float *Y, float *Z, float *W, float *V) {
return (*X+*Y)*(*Z+*W)+*V;
}
For example, this makes us schedule *X then *Y, not *X then *Z. The former
allows us to issue the add, the later only lets us issue other loads.
This turns the above code from this:
_testadd:
lfs f0, 0(r3)
lfs f1, 0(r6)
lfs f2, 0(r4)
lfs f3, 0(r5)
fadds f0, f0, f2
fadds f1, f3, f1
lfs f2, 0(r7)
fmadds f1, f0, f1, f2
blr
into this:
_testadd:
lfs f0, 0(r6)
lfs f1, 0(r5)
fadds f0, f1, f0
lfs f1, 0(r4)
lfs f2, 0(r3)
fadds f1, f2, f1
lfs f2, 0(r7)
fmadds f1, f1, f0, f2
blr
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26680 91177308-0d34-0410-b5e6-96231b3b80d8
|