13 files changed, 146 insertions, 1930 deletions

diff --git a/tools/Makefile b/tools/Makefile
index 9bc74fe3fa..7f0f1df714 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -15,14 +15,11 @@ OPTIONAL_PARALLEL_DIRS := clang
 # NOTE: The tools are organized into five groups of four consisting of one
 # large and three small executables. This is done to minimize memory load
 # in parallel builds.  Please retain this ordering.
-
-# libEnhancedDisassembly must be built ahead of llvm-mc
-# because llvm-mc links against libEnhancedDisassembly
-DIRS := llvm-config edis llvm-mc
-PARALLEL_DIRS := opt llvm-as llvm-dis \
+DIRS := llvm-config 
+PARALLEL_DIRS := opt llvm-as llvm-dis edis \
                  llc llvm-ranlib llvm-ar llvm-nm \
                  llvm-ld llvm-prof llvm-link \
-                 lli llvm-extract \
+                 lli llvm-extract llvm-mc \
                  bugpoint llvm-bcanalyzer llvm-stub \
                  llvmc
 
@@ -34,6 +31,7 @@ endif
 
 include $(LEVEL)/Makefile.config
 
+
 # These libraries build as dynamic libraries (.dylib /.so), they can only be
 # built if ENABLE_PIC is set.
 ifeq ($(ENABLE_PIC),1)
@@ -46,6 +44,14 @@ ifeq ($(ENABLE_PIC),1)
     else
       PARALLEL_DIRS += lto
     endif
+
+    # The edis library is only supported if ARM and/or X86 are enabled, and if
+    # LLVM is being built PIC on platforms that support dylibs.
+    ifneq ($(DISABLE_EDIS),1)
+    ifneq ($(filter $(TARGETS_TO_BUILD), X86 ARM),)
+      PARALLEL_DIRS := $(filter-out edis, $(PARALLEL_DIRS))
+    endif
+    endif
   endif
 endif
 
diff --git a/tools/edis/EDDisassembler.cpp b/tools/edis/EDDisassembler.cpp
deleted file mode 100644
index dc2ed3e2c2..0000000000
--- a/tools/edis/EDDisassembler.cpp
+++ /dev/null
@@ -1,408 +0,0 @@
-//===-EDDisassembler.cpp - LLVM Enhanced Disassembler ---------------------===//
-//
-//                     The LLVM Compiler Infrastructure
-//
-// This file is distributed under the University of Illinois Open Source
-// License. See LICENSE.TXT for details.
-// 
-//===----------------------------------------------------------------------===//
-//
-// This file implements the Enhanced Disassembly library's  disassembler class.
-// The disassembler is responsible for vending individual instructions according
-// to a given architecture and disassembly syntax.
-//
-//===----------------------------------------------------------------------===//
-
-#include "EDDisassembler.h"
-#include "EDInst.h"
-
-#include "llvm/ADT/OwningPtr.h"
-#include "llvm/ADT/SmallVector.h"
-#include "llvm/MC/EDInstInfo.h"
-#include "llvm/MC/MCAsmInfo.h"
-#include "llvm/MC/MCContext.h"
-#include "llvm/MC/MCDisassembler.h"
-#include "llvm/MC/MCExpr.h"
-#include "llvm/MC/MCInst.h"
-#include "llvm/MC/MCInstPrinter.h"
-#include "llvm/MC/MCStreamer.h"
-#include "llvm/MC/MCParser/AsmLexer.h"
-#include "llvm/MC/MCParser/MCAsmParser.h"
-#include "llvm/MC/MCParser/MCParsedAsmOperand.h"
-#include "llvm/Support/MemoryBuffer.h"
-#include "llvm/Support/MemoryObject.h"
-#include "llvm/Support/SourceMgr.h"
-#include "llvm/Target/TargetAsmLexer.h"
-#include "llvm/Target/TargetAsmParser.h"
-#include "llvm/Target/TargetRegistry.h"
-#include "llvm/Target/TargetMachine.h"
-#include "llvm/Target/TargetRegisterInfo.h"
-#include "llvm/Target/TargetSelect.h"
-
-using namespace llvm;
-
-bool EDDisassembler::sInitialized = false;
-EDDisassembler::DisassemblerMap_t EDDisassembler::sDisassemblers;
-
-struct TripleMap {
-  Triple::ArchType Arch;
-  const char *String;
-};
-
-static struct TripleMap triplemap[] = {
-  { Triple::x86,          "i386-unknown-unknown"    },
-  { Triple::x86_64,       "x86_64-unknown-unknown"  },
-  { Triple::arm,          "arm-unknown-unknown"     },
-  { Triple::thumb,        "thumb-unknown-unknown"   },
-  { Triple::InvalidArch,  NULL,                     }
-};
-
-/// infoFromArch - Returns the TripleMap corresponding to a given architecture,
-///   or NULL if there is an error
-///
-/// @arg arch - The Triple::ArchType for the desired architecture
-static const char *tripleFromArch(Triple::ArchType arch) {
-  unsigned int infoIndex;
-  
-  for (infoIndex = 0; triplemap[infoIndex].String != NULL; ++infoIndex) {
-    if (arch == triplemap[infoIndex].Arch)
-      return triplemap[infoIndex].String;
-  }
-  
-  return NULL;
-}
-
-/// getLLVMSyntaxVariant - gets the constant to use to get an assembly printer
-///   for the desired assembly syntax, suitable for passing to 
-///   Target::createMCInstPrinter()
-///
-/// @arg arch   - The target architecture
-/// @arg syntax - The assembly syntax in sd form
-static int getLLVMSyntaxVariant(Triple::ArchType arch,
-                                EDAssemblySyntax_t syntax) {
-  switch (syntax) {
-  default:
-    return -1;
-  // Mappings below from X86AsmPrinter.cpp
-  case kEDAssemblySyntaxX86ATT:
-    if (arch == Triple::x86 || arch == Triple::x86_64)
-      return 0;
-    else
-      return -1;
-  case kEDAssemblySyntaxX86Intel:
-    if (arch == Triple::x86 || arch == Triple::x86_64)
-      return 1;
-    else
-      return -1;
-  case kEDAssemblySyntaxARMUAL:
-    if (arch == Triple::arm || arch == Triple::thumb)
-      return 0;
-    else
-      return -1;
-  }
-}
-
-void EDDisassembler::initialize() {
-  if (sInitialized)
-    return;
-  
-  sInitialized = true;
-  
-  InitializeAllTargetInfos();
-  InitializeAllTargets();
-  InitializeAllAsmPrinters();
-  InitializeAllAsmParsers();
-  InitializeAllDisassemblers();
-}
-
-#undef BRINGUP_TARGET
-
-EDDisassembler *EDDisassembler::getDisassembler(Triple::ArchType arch,
-                                                EDAssemblySyntax_t syntax) {
-  CPUKey key;
-  key.Arch = arch;
-  key.Syntax = syntax;
-  
-  EDDisassembler::DisassemblerMap_t::iterator i = sDisassemblers.find(key);
-  
-  if (i != sDisassemblers.end()) {
-    return i->second;
-  } else {
-    EDDisassembler* sdd = new EDDisassembler(key);
-    if (!sdd->valid()) {
-      delete sdd;
-      return NULL;
-    }
-    
-    sDisassemblers[key] = sdd;
-    
-    return sdd;
-  }
-  
-  return NULL;
-}
-
-EDDisassembler *EDDisassembler::getDisassembler(StringRef str,
-                                                EDAssemblySyntax_t syntax) {
-  Triple triple(str);
-  
-  return getDisassembler(triple.getArch(), syntax);
-}
-
-EDDisassembler::EDDisassembler(CPUKey &key) : 
-  Valid(false), 
-  HasSemantics(false), 
-  ErrorStream(nulls()), 
-  Key(key) {
-  const char *triple = tripleFromArch(key.Arch);
-    
-  if (!triple)
-    return;
-  
-  LLVMSyntaxVariant = getLLVMSyntaxVariant(key.Arch, key.Syntax);
-  
-  if (LLVMSyntaxVariant < 0)
-    return;
-  
-  std::string tripleString(triple);
-  std::string errorString;
-  
-  Tgt = TargetRegistry::lookupTarget(tripleString, 
-                                     errorString);
-  
-  if (!Tgt)
-    return;
-  
-  std::string featureString;
-  
-  TargetMachine.reset(Tgt->createTargetMachine(tripleString,
-                                               featureString));
-  
-  const TargetRegisterInfo *registerInfo = TargetMachine->getRegisterInfo();
-  
-  if (!registerInfo)
-    return;
-    
-  initMaps(*registerInfo);
-  
-  AsmInfo.reset(Tgt->createAsmInfo(tripleString));
-  
-  if (!AsmInfo)
-    return;
-  
-  Disassembler.reset(Tgt->createMCDisassembler());
-  
-  if (!Disassembler)
-    return;
-    
-  InstInfos = Disassembler->getEDInfo();
-  
-  InstString.reset(new std::string);
-  InstStream.reset(new raw_string_ostream(*InstString));
-  InstPrinter.reset(Tgt->createMCInstPrinter(LLVMSyntaxVariant, *AsmInfo));
-  
-  if (!InstPrinter)
-    return;
-    
-  GenericAsmLexer.reset(new AsmLexer(*AsmInfo));
-  SpecificAsmLexer.reset(Tgt->createAsmLexer(*AsmInfo));
-  SpecificAsmLexer->InstallLexer(*GenericAsmLexer);
-  
-  initMaps(*TargetMachine->getRegisterInfo());
-    
-  Valid = true;
-}
-
-EDDisassembler::~EDDisassembler() {
-  if (!valid())
-    return;
-}
-
-namespace {
-  /// EDMemoryObject - a subclass of MemoryObject that allows use of a callback
-  ///   as provided by the sd interface.  See MemoryObject.
-  class EDMemoryObject : public llvm::MemoryObject {
-  private:
-    EDByteReaderCallback Callback;
-    void *Arg;
-  public:
-    EDMemoryObject(EDByteReaderCallback callback,
-                   void *arg) : Callback(callback), Arg(arg) { }
-    ~EDMemoryObject() { }
-    uint64_t getBase() const { return 0x0; }
-    uint64_t getExtent() const { return (uint64_t)-1; }
-    int readByte(uint64_t address, uint8_t *ptr) const {
-      if (!Callback)
-        return -1;
-      
-      if (Callback(ptr, address, Arg))
-        return -1;
-      
-      return 0;
-    }
-  };
-}
-
-EDInst *EDDisassembler::createInst(EDByteReaderCallback byteReader, 
-                                   uint64_t address, 
-                                   void *arg) {
-  EDMemoryObject memoryObject(byteReader, arg);
-  
-  MCInst* inst = new MCInst;
-  uint64_t byteSize;
-  
-  if (!Disassembler->getInstruction(*inst,
-                                    byteSize,
-                                    memoryObject,
-                                    address,
-                                    ErrorStream)) {
-    delete inst;
-    return NULL;
-  } else {
-    const llvm::EDInstInfo *thisInstInfo;
-
-    thisInstInfo = &InstInfos[inst->getOpcode()];
-    
-    EDInst* sdInst = new EDInst(inst, byteSize, *this, thisInstInfo);
-    return sdInst;
-  }
-}
-
-void EDDisassembler::initMaps(const TargetRegisterInfo &registerInfo) {
-  unsigned numRegisters = registerInfo.getNumRegs();
-  unsigned registerIndex;
-  
-  for (registerIndex = 0; registerIndex < numRegisters; ++registerIndex) {
-    const char* registerName = registerInfo.get(registerIndex).Name;
-    
-    RegVec.push_back(registerName);
-    RegRMap[registerName] = registerIndex;
-  }
-  
-  switch (Key.Arch) {
-  default:
-    break;
-  case Triple::x86:
-  case Triple::x86_64:
-    stackPointers.insert(registerIDWithName("SP"));
-    stackPointers.insert(registerIDWithName("ESP"));
-    stackPointers.insert(registerIDWithName("RSP"));
-    
-    programCounters.insert(registerIDWithName("IP"));
-    programCounters.insert(registerIDWithName("EIP"));
-    programCounters.insert(registerIDWithName("RIP"));
-    break;
-  case Triple::arm:
-  case Triple::thumb:
-    stackPointers.insert(registerIDWithName("SP"));
-    
-    programCounters.insert(registerIDWithName("PC"));
-    break;  
-  }
-}
-
-const char *EDDisassembler::nameWithRegisterID(unsigned registerID) const {
-  if (registerID >= RegVec.size())
-    return NULL;
-  else
-    return RegVec[registerID].c_str();
-}
-
-unsigned EDDisassembler::registerIDWithName(const char *name) const {
-  regrmap_t::const_iterator iter = RegRMap.find(std::string(name));
-  if (iter == RegRMap.end())
-    return 0;
-  else
-    return (*iter).second;
-}
-
-bool EDDisassembler::registerIsStackPointer(unsigned registerID) {
-  return (stackPointers.find(registerID) != stackPointers.end());
-}
-
-bool EDDisassembler::registerIsProgramCounter(unsigned registerID) {
-  return (programCounters.find(registerID) != programCounters.end());
-}
-
-int EDDisassembler::printInst(std::string &str, MCInst &inst) {
-  PrinterMutex.acquire();
-  
-  InstPrinter->printInst(&inst, *InstStream);
-  InstStream->flush();
-  str = *InstString;
-  InstString->clear();
-  
-  PrinterMutex.release();
-  
-  return 0;
-}
-
-int EDDisassembler::parseInst(SmallVectorImpl<MCParsedAsmOperand*> &operands,
-                              SmallVectorImpl<AsmToken> &tokens,
-                              const std::string &str) {
-  int ret = 0;
-  
-  switch (Key.Arch) {
-  default:
-    return -1;
-  case Triple::x86:
-  case Triple::x86_64:
-  case Triple::arm:
-  case Triple::thumb:
-    break;
-  }
-  
-  const char *cStr = str.c_str();
-  MemoryBuffer *buf = MemoryBuffer::getMemBuffer(cStr, cStr + strlen(cStr));
-  
-  StringRef instName;
-  SMLoc instLoc;
-  
-  SourceMgr sourceMgr;
-  sourceMgr.AddNewSourceBuffer(buf, SMLoc()); // ownership of buf handed over
-  MCContext context(*AsmInfo);
-  OwningPtr<MCStreamer> streamer(createNullStreamer(context));
-  OwningPtr<MCAsmParser> genericParser(createMCAsmParser(*Tgt, sourceMgr,
-                                                         context, *streamer,
-                                                         *AsmInfo));
-  OwningPtr<TargetAsmParser> TargetParser(Tgt->createAsmParser(*genericParser,
-                                                               *TargetMachine));
-  
-  AsmToken OpcodeToken = genericParser->Lex();
-  AsmToken NextToken = genericParser->Lex();  // consume next token, because specificParser expects us to
-    
-  if (OpcodeToken.is(AsmToken::Identifier)) {
-    instName = OpcodeToken.getString();
-    instLoc = OpcodeToken.getLoc();
-    
-    if (NextToken.isNot(AsmToken::Eof) &&
-        TargetParser->ParseInstruction(instName, instLoc, operands))
-      ret = -1;
-  } else {
-    ret = -1;
-  }
-  
-  ParserMutex.acquire();
-  
-  if (!ret) {
-    GenericAsmLexer->setBuffer(buf);
-  
-    while (SpecificAsmLexer->Lex(),
-           SpecificAsmLexer->isNot(AsmToken::Eof) &&
-           SpecificAsmLexer->isNot(AsmToken::EndOfStatement)) {
-      if (SpecificAsmLexer->is(AsmToken::Error)) {
-        ret = -1;
-        break;
-      }
-      tokens.push_back(SpecificAsmLexer->getTok());
-    }
-  }
-
-  ParserMutex.release();
-  
-  return ret;
-}
-
-int EDDisassembler::llvmSyntaxVariant() const {
-  return LLVMSyntaxVariant;
-}
diff --git a/tools/edis/EDDisassembler.h b/tools/edis/EDDisassembler.h
deleted file mode 100644
index 913ae842bf..0000000000
--- a/tools/edis/EDDisassembler.h
+++ /dev/null
@@ -1,259 +0,0 @@
-//===-EDDisassembler.h - LLVM Enhanced Disassembler -------------*- C++ -*-===//
-//
-//                     The LLVM Compiler Infrastructure
-//
-// This file is distributed under the University of Illinois Open Source
-// License. See LICENSE.TXT for details.
-// 
-//===----------------------------------------------------------------------===//
-//
-// This file defines the interface for the Enhanced Disassembly library's
-// disassembler class.  The disassembler is responsible for vending individual
-// instructions according to a given architecture and disassembly syntax.
-//
-//===----------------------------------------------------------------------===//
-
-#ifndef EDDisassembler_
-#define EDDisassembler_
-
-#include "EDInfo.inc"
-
-#include "llvm-c/EnhancedDisassembly.h"
-
-#include "llvm/ADT/OwningPtr.h"
-#include "llvm/ADT/Triple.h"
-#include "llvm/Support/raw_ostream.h"
-#include "llvm/System/Mutex.h"
-
-#include <map>
-#include <set>
-#include <string>
-#include <vector>
-
-namespace llvm {
-class AsmLexer;
-class AsmToken;
-class MCContext;
-class MCAsmInfo;
-class MCAsmLexer;
-class AsmParser;
-class TargetAsmLexer;
-class TargetAsmParser;
-class MCDisassembler;
-class MCInstPrinter;
-class MCInst;
-class MCParsedAsmOperand;
-class MCStreamer;
-template <typename T> class SmallVectorImpl;
-class SourceMgr;
-class Target;
-class TargetMachine;
-class TargetRegisterInfo;
-
-struct EDInstInfo;
-}
-
-/// EDDisassembler - Encapsulates a disassembler for a single architecture and
-///   disassembly syntax.  Also manages the static disassembler registry.
-struct EDDisassembler {
-  ////////////////////
-  // Static members //
-  ////////////////////
-  
-  /// CPUKey - Encapsulates the descriptor of an architecture/disassembly-syntax
-  ///   pair
-  struct CPUKey {
-    /// The architecture type
-    llvm::Triple::ArchType Arch;
-    
-    /// The assembly syntax
-    EDAssemblySyntax_t Syntax;
-    
-    /// operator== - Equality operator
-    bool operator==(const CPUKey &key) const {
-      return (Arch == key.Arch &&
-              Syntax == key.Syntax);
-    }
-    
-    /// operator< - Less-than operator
-    bool operator<(const CPUKey &key) const {
-      if(Arch > key.Arch)
-        return false;
-      if(Syntax >= key.Syntax)
-        return false;
-      return true;
-    }
-  };
-  
-  typedef std::map<CPUKey, EDDisassembler*> DisassemblerMap_t;
-  
-  /// True if the disassembler registry has been initialized; false if not
-  static bool sInitialized;
-  /// A map from disassembler specifications to disassemblers.  Populated
-  ///   lazily.
-  static DisassemblerMap_t sDisassemblers;
-
-  /// getDisassembler - Returns the specified disassemble, or NULL on failure
-  ///
-  /// @arg arch   - The desired architecture
-  /// @arg syntax - The desired disassembly syntax
-  static EDDisassembler *getDisassembler(llvm::Triple::ArchType arch,
-                                         EDAssemblySyntax_t syntax);
-  
-  /// getDisassembler - Returns the disassembler for a given combination of
-  ///   CPU type, CPU subtype, and assembly syntax, or NULL on failure
-  ///
-  /// @arg str    - The string representation of the architecture triple, e.g.,
-  ///               "x86_64-apple-darwin"
-  /// @arg syntax - The disassembly syntax for the required disassembler
-  static EDDisassembler *getDisassembler(llvm::StringRef str,
-                                         EDAssemblySyntax_t syntax);
-  
-  /// initialize - Initializes the disassembler registry and the LLVM backend
-  static void initialize();
-  
-  ////////////////////////
-  // Per-object members //
-  ////////////////////////
-  
-  /// True only if the object has been successfully initialized
-  bool Valid;
-  /// True if the disassembler can provide semantic information
-  bool HasSemantics;
-  
-  /// The stream to write errors to
-  llvm::raw_ostream &ErrorStream;
-
-  /// The architecture/syntax pair for the current architecture
-  CPUKey Key;
-  /// The LLVM target corresponding to the disassembler
-  const llvm::Target *Tgt;
-  /// The target machien instance.
-  llvm::OwningPtr<llvm::TargetMachine> TargetMachine;
-  /// The assembly information for the target architecture
-  llvm::OwningPtr<const llvm::MCAsmInfo> AsmInfo;
-  /// The disassembler for the target architecture
-  llvm::OwningPtr<const llvm::MCDisassembler> Disassembler;
-  /// The output string for the instruction printer; must be guarded with 
-  ///   PrinterMutex
-  llvm::OwningPtr<std::string> InstString;
-  /// The output stream for the disassembler; must be guarded with
-  ///   PrinterMutex
-  llvm::OwningPtr<llvm::raw_string_ostream> InstStream;
-  /// The instruction printer for the target architecture; must be guarded with
-  ///   PrinterMutex when printing
-  llvm::OwningPtr<llvm::MCInstPrinter> InstPrinter;
-  /// The mutex that guards the instruction printer's printing functions, which
-  ///   use a shared stream
-  llvm::sys::Mutex PrinterMutex;
-  /// The array of instruction information provided by the TableGen backend for
-  ///   the target architecture
-  const llvm::EDInstInfo *InstInfos;
-  /// The target-specific lexer for use in tokenizing strings, in
-  ///   target-independent and target-specific portions
-  llvm::OwningPtr<llvm::AsmLexer> GenericAsmLexer;
-  llvm::OwningPtr<llvm::TargetAsmLexer> SpecificAsmLexer;
-  /// The guard for the above
-  llvm::sys::Mutex ParserMutex;
-  /// The LLVM number used for the target disassembly syntax variant
-  int LLVMSyntaxVariant;
-    
-  typedef std::vector<std::string> regvec_t;
-  typedef std::map<std::string, unsigned> regrmap_t;
-  
-  /// A vector of registers for quick mapping from LLVM register IDs to names
-  regvec_t RegVec;
-  /// A map of registers for quick mapping from register names to LLVM IDs
-  regrmap_t RegRMap;
-  
-  /// A set of register IDs for aliases of the stack pointer for the current
-  ///   architecture
-  std::set<unsigned> stackPointers;
-  /// A set of register IDs for aliases of the program counter for the current
-  ///   architecture
-  std::set<unsigned> programCounters;
-  
-  /// Constructor - initializes a disassembler with all the necessary objects,
-  ///   which come pre-allocated from the registry accessor function
-  ///
-  /// @arg key                - the architecture and disassembly syntax for the 
-  ///                           disassembler
-  EDDisassembler(CPUKey& key);
-  
-  /// valid - reports whether there was a failure in the constructor.
-  bool valid() {
-    return Valid;
-  }
-  
-  /// hasSemantics - reports whether the disassembler can provide operands and
-  ///   tokens.
-  bool hasSemantics() {
-    return HasSemantics;
-  }
-  
-  ~EDDisassembler();
-  
-  /// createInst - creates and returns an instruction given a callback and
-  ///   memory address, or NULL on failure
-  ///
-  /// @arg byteReader - A callback function that provides machine code bytes
-  /// @arg address    - The address of the first byte of the instruction,
-  ///                   suitable for passing to byteReader
-  /// @arg arg        - An opaque argument for byteReader
-  EDInst *createInst(EDByteReaderCallback byteReader, 
-                     uint64_t address, 
-                     void *arg);
-
-  /// initMaps - initializes regVec and regRMap using the provided register
-  ///   info
-  ///
-  /// @arg registerInfo - the register information to use as a source
-  void initMaps(const llvm::TargetRegisterInfo &registerInfo);
-  /// nameWithRegisterID - Returns the name (owned by the EDDisassembler) of a 
-  ///   register for a given register ID, or NULL on failure
-  ///
-  /// @arg registerID - the ID of the register to be queried
-  const char *nameWithRegisterID(unsigned registerID) const;
-  /// registerIDWithName - Returns the ID of a register for a given register
-  ///   name, or (unsigned)-1 on failure
-  ///
-  /// @arg name - The name of the register
-  unsigned registerIDWithName(const char *name) const;
-  
-  /// registerIsStackPointer - reports whether a register ID is an alias for the
-  ///   stack pointer register
-  ///
-  /// @arg registerID - The LLVM register ID
-  bool registerIsStackPointer(unsigned registerID);
-  /// registerIsStackPointer - reports whether a register ID is an alias for the
-  ///   stack pointer register
-  ///
-  /// @arg registerID - The LLVM register ID
-  bool registerIsProgramCounter(unsigned registerID);
-  
-  /// printInst - prints an MCInst to a string, returning 0 on success, or -1
-  ///   otherwise
-  ///
-  /// @arg str  - A reference to a string which is filled in with the string
-  ///             representation of the instruction
-  /// @arg inst - A reference to the MCInst to be printed
-  int printInst(std::string& str,
-                llvm::MCInst& inst);
-  
-  /// parseInst - extracts operands and tokens from a string for use in
-  ///   tokenizing the string.  Returns 0 on success, or -1 otherwise.
-  ///
-  /// @arg operands - A reference to a vector that will be filled in with the
-  ///                 parsed operands
-  /// @arg tokens   - A reference to a vector that will be filled in with the
-  ///                 tokens
-  /// @arg str      - The string representation of the instruction
-  int parseInst(llvm::SmallVectorImpl<llvm::MCParsedAsmOperand*> &operands,
-                llvm::SmallVectorImpl<llvm::AsmToken> &tokens,
-                const std::string &str);
-  
-  /// llvmSyntaxVariant - returns the LLVM syntax variant for this disassembler
-  int llvmSyntaxVariant() const;  
-};
-
-#endif
diff --git a/tools/edis/EDInst.cpp b/tools/edis/EDInst.cpp
deleted file mode 100644
index c009f0f868..0000000000
--- a/tools/edis/EDInst.cpp
+++ /dev/null
@@ -1,207 +0,0 @@
-//===-EDInst.cpp - LLVM Enhanced Disassembler -----------------------------===//
-//
-//                     The LLVM Compiler Infrastructure
-//
-// This file is distributed under the University of Illinois Open Source
-// License. See LICENSE.TXT for details.
-// 
-//===----------------------------------------------------------------------===//
-//
-// This file implements the Enhanced Disassembly library's instruction class.
-// The instruction is responsible for vending the string representation, 
-// individual tokens, and operands for a single instruction.
-//
-//===----------------------------------------------------------------------===//
-
-#include "EDDisassembler.h"
-#include "EDInst.h"
-#include "EDOperand.h"
-#include "EDToken.h"
-
-#include "llvm/MC/EDInstInfo.h"
-#include "llvm/MC/MCInst.h"
-
-using namespace llvm;
-
-EDInst::EDInst(llvm::MCInst *inst,
-               uint64_t byteSize, 
-               EDDisassembler &disassembler,
-               const llvm::EDInstInfo *info) :
-  Disassembler(disassembler),
-  Inst(inst),
-  ThisInstInfo(info),
-  ByteSize(byteSize),
-  BranchTarget(-1),
-  MoveSource(-1),
-  MoveTarget(-1) {
-  OperandOrder = ThisInstInfo->operandOrders[Disassembler.llvmSyntaxVariant()];
-}
-
-EDInst::~EDInst() {
-  unsigned int index;
-  unsigned int numOperands = Operands.size();
-  
-  for (index = 0; index < numOperands; ++index)
-    delete Operands[index];
-  
-  unsigned int numTokens = Tokens.size();
-  
-  for (index = 0; index < numTokens; ++index)
-    delete Tokens[index];
-  
-  delete Inst;
-}
-
-uint64_t EDInst::byteSize() {
-  return ByteSize;
-}
-
-int EDInst::stringify() {
-  if (StringifyResult.valid())
-    return StringifyResult.result();
-  
-  if (Disassembler.printInst(String, *Inst))
-    return StringifyResult.setResult(-1);
-  
-  return StringifyResult.setResult(0);
-}
-
-int EDInst::getString(const char*& str) {
-  if (stringify())
-    return -1;
-  
-  str = String.c_str();
-  
-  return 0;
-}
-
-unsigned EDInst::instID() {
-  return Inst->getOpcode();
-}
-
-bool EDInst::isBranch() {
-  if (ThisInstInfo)
-    return 
-      ThisInstInfo->instructionType == kInstructionTypeBranch ||
-      ThisInstInfo->instructionType == kInstructionTypeCall;
-  else
-    return false;
-}
-
-bool EDInst::isMove() {
-  if (ThisInstInfo)
-    return ThisInstInfo->instructionType == kInstructionTypeMove;
-  else
-    return false;
-}
-
-int EDInst::parseOperands() {
-  if (ParseResult.valid())
-    return ParseResult.result();
-  
-  if (!ThisInstInfo)
-    return ParseResult.setResult(-1);
-  
-  unsigned int opIndex;
-  unsigned int mcOpIndex = 0;
-  
-  for (opIndex = 0; opIndex < ThisInstInfo->numOperands; ++opIndex) {
-    if (isBranch() &&
-        (ThisInstInfo->operandFlags[opIndex] & kOperandFlagTarget)) {
-      BranchTarget = opIndex;
-    }
-    else if (isMove()) {
-      if (ThisInstInfo->operandFlags[opIndex] & kOperandFlagSource)
-        MoveSource = opIndex;
-      else if (ThisInstInfo->operandFlags[opIndex] & kOperandFlagTarget)
-        MoveTarget = opIndex;
-    }
-    
-    EDOperand *operand = new EDOperand(Disassembler, *this, opIndex, mcOpIndex);
-    
-    Operands.push_back(operand);
-  }
-  
-  return ParseResult.setResult(0);
-}
-
-int EDInst::branchTargetID() {
-  if (parseOperands())
-    return -1;
-  return BranchTarget;
-}
-
-int EDInst::moveSourceID() {
-  if (parseOperands())
-    return -1;
-  return MoveSource;
-}
-
-int EDInst::moveTargetID() {
-  if (parseOperands())
-    return -1;
-  return MoveTarget;
-}
-
-int EDInst::numOperands() {
-  if (parseOperands())
-    return -1;
-  return Operands.size();
-}
-
-int EDInst::getOperand(EDOperand *&operand, unsigned int index) {
-  if (parseOperands())
-    return -1;
-  
-  if (index >= Operands.size())
-    return -1;
-  
-  operand = Operands[index];
-  return 0;
-}
-
-int EDInst::tokenize() {
-  if (TokenizeResult.valid())
-    return TokenizeResult.result();
-  
-  if (stringify())
-    return TokenizeResult.setResult(-1);
-    
-  return TokenizeResult.setResult(EDToken::tokenize(Tokens,
-                                                    String,
-                                                    OperandOrder,
-                                                    Disassembler));
-    
-}
-
-int EDInst::numTokens() {
-  if (tokenize())
-    return -1;
-  return Tokens.size();
-}
-
-int EDInst::getToken(EDToken *&token, unsigned int index) {
-  if (tokenize())
-    return -1;
-  token = Tokens[index];
-  return 0;
-}
-
-#ifdef __BLOCKS__
-int EDInst::visitTokens(EDTokenVisitor_t visitor) {
-  if (tokenize())
-    return -1;
-  
-  tokvec_t::iterator iter;
-  
-  for (iter = Tokens.begin(); iter != Tokens.end(); ++iter) {
-    int ret = visitor(*iter);
-    if (ret == 1)
-      return 0;
-    if (ret != 0)
-      return -1;
-  }
-  
-  return 0;
-}
-#endif
diff --git a/tools/edis/EDInst.h b/tools/edis/EDInst.h
deleted file mode 100644
index c8a747ff99..0000000000
--- a/tools/edis/EDInst.h
+++ /dev/null
@@ -1,175 +0,0 @@
-//===-EDInst.h - LLVM Enhanced Disassembler ---------------------*- C++ -*-===//
-//
-//                     The LLVM Compiler Infrastructure
-//
-// This file is distributed under the University of Illinois Open Source
-// License. See LICENSE.TXT for details.
-// 
-//===----------------------------------------------------------------------===//
-//
-// This file defines the interface for the Enhanced Disassembly library's
-// instruction class.  The instruction is responsible for vending the string
-// representation, individual tokens and operands for a single instruction.
-//
-//===----------------------------------------------------------------------===//
-
-#ifndef EDInst_
-#define EDInst_
-
-#include "llvm-c/EnhancedDisassembly.h"
-
-#include "llvm/ADT/SmallVector.h"
-
-#include <string>
-#include <vector>
-
-namespace llvm {
-  struct EDInstInfo;
-}
-
-/// CachedResult - Encapsulates the result of a function along with the validity
-///   of that result, so that slow functions don't need to run twice
-struct CachedResult {
-  /// True if the result has been obtained by executing the function
-  bool Valid;
-  /// The result last obtained from the function
-  int Result;
-  
-  /// Constructor - Initializes an invalid result
-  CachedResult() : Valid(false) { }
-  /// valid - Returns true if the result has been obtained by executing the
-  ///   function and false otherwise
-  bool valid() { return Valid; }
-  /// result - Returns the result of the function or an undefined value if
-  ///   valid() is false
-  int result() { return Result; }
-  /// setResult - Sets the result of the function and declares it valid
-  ///   returning the result (so that setResult() can be called from inside a
-  ///   return statement)
-  /// @arg