docs: Nuke the old release notes.

This change also removes a bunch of boilerplate and stuffing which made
it unnecessarily hard to navigate and see the comparatively miniscule
actual content that was added to this document during the 3.2
development period (or maybe even sticking around from earlier
releases...).

The new organization (a flat list) optimizes for making it easy for
people who know about changes to add them to the document.  It's
completely trivial for anyone with basic knowledge of LLVM to come in
later (such as when preparing for the actual release) and cluster any
changes into logical groups. However, I have left some comments
indicating how to add larger descriptions, if someone is feeling
adventurous ;)

Hopefully this organization will highlight how little effort is being
put into producing accurate, high-quality release notes, prompting a
corresponding improvement for the 3.3 release.

I have preserved the changes to this document that are not present
in the 3.2 release notes. There were only two... I'm pretty sure we've
been busier than that... (version control shows +213347/-173656 raw
lines just in the LLVM repo since the 3.2 release).

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172954 91177308-0d34-0410-b5e6-96231b3b80d8

1 files changed, 26 insertions, 505 deletions

diff --git a/docs/ReleaseNotes.rst b/docs/ReleaseNotes.rst
index f69308e1b5..bc23185703 100644
--- a/docs/ReleaseNotes.rst
+++ b/docs/ReleaseNotes.rst
@@ -1,27 +1,21 @@
-.. raw:: html
-
-    <style> .red {color:red} </style>
-
-.. role:: red
-
 ======================
-LLVM 3.2 Release Notes
+LLVM 3.3 Release Notes
 ======================
 
 .. contents::
     :local:
 
-Written by the `LLVM Team <http://llvm.org/>`_
+.. warning::
+   These are in-progress notes for the upcoming LLVM 3.3 release.  You may
+   prefer the `LLVM 3.2 Release Notes <http://llvm.org/releases/3.2/docs
+   /ReleaseNotes.html>`_.
 
-:red:`These are in-progress notes for the upcoming LLVM 3.2 release.  You may
-prefer the` `LLVM 3.1 Release Notes <http://llvm.org/releases/3.1/docs
-/ReleaseNotes.html>`_.
 
 Introduction
 ============
 
 This document contains the release notes for the LLVM Compiler Infrastructure,
-release 3.2.  Here we describe the status of LLVM, including major improvements
+release 3.3.  Here we describe the status of LLVM, including major improvements
 from the previous release, improvements in various subprojects of LLVM, and
 some of the current users of the code.  All LLVM releases may be downloaded
 from the `LLVM releases web site <http://llvm.org/releases/>`_.
@@ -37,506 +31,33 @@ LLVM web page, this document applies to the *next* release, not the current
 one.  To see the release notes for a specific release, please see the `releases
 page <http://llvm.org/releases/>`_.
 
-Sub-project Status Update
-=========================
-
-The LLVM 3.2 distribution currently consists of code from the core LLVM
-repository, which roughly includes the LLVM optimizers, code generators and
-supporting tools, and the Clang repository.  In addition to this code, the LLVM
-Project includes other sub-projects that are in development.  Here we include
-updates on these subprojects.
-
-Clang: C/C++/Objective-C Frontend Toolkit
------------------------------------------
-
-`Clang <http://clang.llvm.org/>`_ is an LLVM front end for the C, C++, and
-Objective-C languages.  Clang aims to provide a better user experience through
-expressive diagnostics, a high level of conformance to language standards, fast
-compilation, and low memory use.  Like LLVM, Clang provides a modular,
-library-based architecture that makes it suitable for creating or integrating
-with other development tools.  Clang is considered a production-quality
-compiler for C, Objective-C, C++ and Objective-C++ on x86 (32- and 64-bit), and
-for Darwin/ARM targets.
-
-In the LLVM 3.2 time-frame, the Clang team has made many improvements.
-Highlights include:
-
-#. More powerful warnings, especially `-Wuninitialized`
-#. Template type diffing in diagnostic messages
-#. Higher quality and more efficient debug info generation
-
-For more details about the changes to Clang since the 3.1 release, see the
-`Clang release notes. <http://clang.llvm.org/docs/ReleaseNotes.html>`_
-
-If Clang rejects your code but another compiler accepts it, please take a look
-at the `language compatibility <http://clang.llvm.org/compatibility.html>`_
-guide to make sure this is not intentional or a known issue.
-
-DragonEgg: GCC front-ends, LLVM back-end
-----------------------------------------
-
-`DragonEgg <http://dragonegg.llvm.org/>`_ is a `gcc plugin
-<http://gcc.gnu.org/wiki/plugins>`_ that replaces GCC's optimizers and code
-generators with LLVM's.  It works with gcc-4.5 and gcc-4.6 (and partially with
-gcc-4.7), can target the x86-32/x86-64 and ARM processor families, and has been
-successfully used on the Darwin, FreeBSD, KFreeBSD, Linux and OpenBSD
-platforms.  It fully supports Ada, C, C++ and Fortran.  It has partial support
-for Go, Java, Obj-C and Obj-C++.
-
-The 3.2 release has the following notable changes:
-
-#. Able to load LLVM plugins such as Polly.
-#. Supports thread-local storage models.
-#. Passes knowledge of variable lifetimes to the LLVM optimizers.
-#. No longer requires GCC to be built with LTO support.
-
-compiler-rt: Compiler Runtime Library
--------------------------------------
-
-The new LLVM `compiler-rt project <http://compiler-rt.llvm.org/>`_ is a simple
-library that provides an implementation of the low-level target-specific hooks
-required by code generation and other runtime components.  For example, when
-compiling for a 32-bit target, converting a double to a 64-bit unsigned integer
-is compiled into a runtime call to the ``__fixunsdfdi`` function.  The
-``compiler-rt`` library provides highly optimized implementations of this and
-other low-level routines (some are 3x faster than the equivalent libgcc
-routines).
-
-The 3.2 release has the following notable changes:
-
-#. ...
-
-LLDB: Low Level Debugger
-------------------------
-
-`LLDB <http://lldb.llvm.org>`_ is a ground-up implementation of a command line
-debugger, as well as a debugger API that can be used from other applications.
-LLDB makes use of the Clang parser to provide high-fidelity expression parsing
-(particularly for C++) and uses the LLVM JIT for target support.
-
-The 3.2 release has the following notable changes:
-
-#. ...
-
-libc++: C++ Standard Library
-----------------------------
-
-Like compiler_rt, libc++ is now :ref:`dual licensed
-<copyright-license-patents>` under the MIT and UIUC license, allowing it to be
-used more permissively.
-
-Within the LLVM 3.2 time-frame there were the following highlights:
-
-#. ...
-
-VMKit
------
-
-The `VMKit project <http://vmkit.llvm.org/>`_ is an implementation of a Java
-Virtual Machine (Java VM or JVM) that uses LLVM for static and just-in-time
-compilation.
-
-The 3.2 release has the following notable changes:
-
-#. ...
-
-Polly: Polyhedral Optimizer
----------------------------
-
-`Polly <http://polly.llvm.org/>`_ is an *experimental* optimizer for data
-locality and parallelism.  It provides high-level loop optimizations and
-automatic parallelisation.
-
-Within the LLVM 3.2 time-frame there were the following highlights:
-
-#. isl, the integer set library used by Polly, was relicensed to the MIT license
-#. isl based code generation
-#. MIT licensed replacement for CLooG (LGPLv2)
-#. Fine grained option handling (separation of core and border computations,
-   control overhead vs. code size)
-#. Support for FORTRAN and dragonegg
-#. OpenMP code generation fixes
-
-External Open Source Projects Using LLVM 3.2
-============================================
-
-An exciting aspect of LLVM is that it is used as an enabling technology for a
-lot of other language and tools projects.  This section lists some of the
-projects that have already been updated to work with LLVM 3.2.
-
-Crack
------
-
-`Crack <http://code.google.com/p/crack-language/>`_ aims to provide the ease of
-development of a scripting language with the performance of a compiled
-language.  The language derives concepts from C++, Java and Python,
-incorporating object-oriented programming, operator overloading and strong
-typing.
-
-FAUST
------
-
-`FAUST <http://faust.grame.fr/>`_ is a compiled language for real-time audio
-signal processing.  The name FAUST stands for Functional AUdio STream.  Its
-programming model combines two approaches: functional programming and block
-diagram composition.  In addition with the C, C++, Java, JavaScript output
-formats, the Faust compiler can generate LLVM bitcode, and works with LLVM
-2.7-3.1.
-
-Glasgow Haskell Compiler (GHC)
-------------------------------
-
-`GHC <http://www.haskell.org/ghc/>`_ is an open source compiler and programming
-suite for Haskell, a lazy functional programming language.  It includes an
-optimizing static compiler generating good code for a variety of platforms,
-together with an interactive system for convenient, quick development.
-
-GHC 7.0 and onwards include an LLVM code generator, supporting LLVM 2.8 and
-later.
-
-Julia
------
-
-`Julia <https://github.com/JuliaLang/julia>`_ is a high-level, high-performance
-dynamic language for technical computing.  It provides a sophisticated
-compiler, distributed parallel execution, numerical accuracy, and an extensive
-mathematical function library.  The compiler uses type inference to generate
-fast code without any type declarations, and uses LLVM's optimization passes
-and JIT compiler.  The `Julia Language <http://julialang.org/>`_ is designed
-around multiple dispatch, giving programs a large degree of flexibility.  It is
-ready for use on many kinds of problems.
-
-LLVM D Compiler
----------------
-
-`LLVM D Compiler <https://github.com/ldc-developers/ldc>`_ (LDC) is a compiler
-for the D programming Language.  It is based on the DMD frontend and uses LLVM
-as backend.
-
-Open Shading Language
----------------------
-
-`Open Shading Language (OSL)
-<https://github.com/imageworks/OpenShadingLanguage/>`_ is a small but rich
-language for programmable shading in advanced global illumination renderers and
-other applications, ideal for describing materials, lights, displacement, and
-pattern generation.  It uses LLVM to JIT complex shader networks to x86 code at
-runtime.
-
-OSL was developed by Sony Pictures Imageworks for use in its in-house renderer
-used for feature film animation and visual effects, and is distributed as open
-source software with the "New BSD" license.
-
-Portable OpenCL (pocl)
-----------------------
-
-In addition to producing an easily portable open source OpenCL implementation,
-another major goal of `pocl <http://pocl.sourceforge.net/>`_ is improving
-performance portability of OpenCL programs with compiler optimizations,
-reducing the need for target-dependent manual optimizations.  An important part
-of pocl is a set of LLVM passes used to statically parallelize multiple
-work-items with the kernel compiler, even in the presence of work-group
-barriers.  This enables static parallelization of the fine-grained static
-concurrency in the work groups in multiple ways (SIMD, VLIW, superscalar, ...).
-
-Pure
-----
-
-`Pure <http://pure-lang.googlecode.com/>`_ is an algebraic/functional
-programming language based on term rewriting.  Programs are collections of
-equations which are used to evaluate expressions in a symbolic fashion.  The
-interpreter uses LLVM as a backend to JIT-compile Pure programs to fast native
-code.  Pure offers dynamic typing, eager and lazy evaluation, lexical closures,
-a hygienic macro system (also based on term rewriting), built-in list and
-matrix support (including list and matrix comprehensions) and an easy-to-use
-interface to C and other programming languages (including the ability to load
-LLVM bitcode modules, and inline C, C++, Fortran and Faust code in Pure
-programs if the corresponding LLVM-enabled compilers are installed).
-
-Pure version 0.54 has been tested and is known to work with LLVM 3.1 (and
-continues to work with older LLVM releases >= 2.5).
-
-TTA-based Co-design Environment (TCE)
--------------------------------------
-
-`TCE <http://tce.cs.tut.fi/>`_ is a toolset for designing application-specific
-processors (ASP) based on the Transport triggered architecture (TTA).  The
-toolset provides a complete co-design flow from C/C++ programs down to
-synthesizable VHDL/Verilog and parallel program binaries.  Processor
-customization points include the register files, function units, supported
-operations, and the interconnection network.
-
-TCE uses Clang and LLVM for C/C++ language support, target independent
-optimizations and also for parts of code generation.  It generates new
-LLVM-based code generators "on the fly" for the designed TTA processors and
-loads them in to the compiler backend as runtime libraries to avoid per-target
-recompilation of larger parts of the compiler chain.
-
-Installation Instructions
-=========================
-
-See :doc:`GettingStarted`.
-
-What's New in LLVM 3.2?
-=======================
-
-This release includes a huge number of bug fixes, performance tweaks and minor
-improvements.  Some of the major improvements and new features are listed in
-this section.
-
-Major New Features
-------------------
-
-..
-
-  Features that need text if they're finished for 3.2:
-   ARM EHABI
-   combiner-aa?
-   strong phi elim
-   loop dependence analysis
-   CorrelatedValuePropagation
-   Integrated assembler on by default for arm/thumb?
-
-  Near dead:
-   Analysis/RegionInfo.h + Dom Frontiers
-   SparseBitVector: used in LiveVar.
-   llvm/lib/Archive - replace with lib object?
-
-
-LLVM 3.2 includes several major changes and big features:
-
-#. New NVPTX back-end (replacing existing PTX back-end) based on NVIDIA sources
-#. ...
-
-LLVM IR and Core Improvements
------------------------------
-
-LLVM IR has several new features for better support of new targets and that
-expose new optimization opportunities:
-
-#. Thread local variables may have a specified TLS model.  See the :ref:`Language
-   Reference Manual <globalvars>`.
-#. ...
-
-Optimizer Improvements
-----------------------
-
-In addition to many minor performance tweaks and bug fixes, this release
-includes a few major enhancements and additions to the optimizers:
-
-Loop Vectorizer - We've added a loop vectorizer and we are now able to
-vectorize small loops.  The loop vectorizer is disabled by default and can be
-enabled using the ``-mllvm -vectorize-loops`` flag.  The SIMD vector width can
-be specified using the flag ``-mllvm -force-vector-width=4``.  The default
-value is ``0`` which means auto-select.
-
-We can now vectorize this function:
-
-.. code-block:: c++
-
-  unsigned sum_arrays(int *A, int *B, int start, int end) {
-    unsigned sum = 0;
-    for (int i = start; i < end; ++i)
-      sum += A[i] + B[i] + i;
-    return sum;
-  }
-
-We vectorize under the following loops:
-
-#. The inner most loops must have a single basic block.
-#. The number of iterations are known before the loop starts to execute.
-#. The loop counter needs to be incremented by one.
-#. The loop trip count **can** be a variable.
-#. Loops do **not** need to start at zero.
-#. The induction variable can be used inside the loop.
-#. Loop reductions are supported.
-#. Arrays with affine access pattern do **not** need to be marked as
-   '``noalias``' and are checked at runtime.
-#. ...
-
-SROA - We've re-written SROA to be significantly more powerful and generate
-code which is much more friendly to the rest of the optimization pipeline.
-Previously this pass had scaling problems that required it to only operate on
-relatively small aggregates, and at times it would mistakenly replace a large
-aggregate with a single very large integer in order to make it a scalar SSA
-value. The result was a large number of i1024 and i2048 values representing any
-small stack buffer. These in turn slowed down many subsequent optimization
-paths.
-
-The new SROA pass uses a different algorithm that allows it to only promote to
-scalars the pieces of the aggregate actively in use. Because of this it doesn't
-require any thresholds. It also always deduces the scalar values from the uses
-of the aggregate rather than the specific LLVM type of the aggregate. These
-features combine to both optimize more code with the pass but to improve the
-compile time of many functions dramatically.
-
-#. Branch weight metadata is preseved through more of the optimizer.
-#. ...
-
-MC Level Improvements
----------------------
-
-The LLVM Machine Code (aka MC) subsystem was created to solve a number of
-problems in the realm of assembly, disassembly, object file format handling,
-and a number of other related areas that CPU instruction-set level tools work
-in.  For more information, please see the `Intro to the LLVM MC Project Blog
-Post <http://blog.llvm.org/2010/04/intro-to-llvm-mc-project.html>`_.
-
-#. ...
-
-.. _codegen:
-
-Target Independent Code Generator Improvements
-----------------------------------------------
-
-We have put a significant amount of work into the code generator
-infrastructure, which allows us to implement more aggressive algorithms and
-make it run faster:
-
-#. ...
-
-Stack Coloring - We have implemented a new optimization pass to merge stack
-objects which are used in disjoin areas of the code.  This optimization reduces
-the required stack space significantly, in cases where it is clear to the
-optimizer that the stack slot is not shared.  We use the lifetime markers to
-tell the codegen that a certain alloca is used within a region.
-
-We now merge consecutive loads and stores.
-
-X86-32 and X86-64 Target Improvements
--------------------------------------
-
-New features and major changes in the X86 target include:
-
-#. ...
-
-.. _ARM:
-
-ARM Target Improvements
------------------------
-
-New features of the ARM target include:
-
-#. ...
-
-.. _armintegratedassembler:
-
-MIPS Target Improvements
-------------------------
-
-New features and major changes in the MIPS target include:
-
-#. ...
-
-PowerPC Target Improvements
----------------------------
-
-Many fixes and changes across LLVM (and Clang) for better compliance with the
-64-bit PowerPC ELF Application Binary Interface, interoperability with GCC, and
-overall 64-bit PowerPC support.  Some highlights include:
-
-#. MCJIT support added.
-#. PPC64 relocation support and (small code model) TOC handling added.
-#. Parameter passing and return value fixes (alignment issues, padding, varargs
-   support, proper register usage, odd-sized structure support, float support,
-   extension of return values for i32 return values).
-#. Fixes in spill and reload code for vector registers.
-#. C++ exception handling enabled.
-#. Changes to remediate double-rounding compatibility issues with respect to
-   GCC behavior.
-#. Refactoring to disentangle ``ppc64-elf-linux`` ABI from Darwin ppc64 ABI
-   support.
-#. Assorted new test cases and test case fixes (endian and word size issues).
-#. Fixes for big-endian codegen bugs, instruction encodings, and instruction
-   constraints.
-#. Implemented ``-integrated-as`` support.
-#. Additional support for Altivec compare operations.
-#. IBM long double support.
-
-There have also been code generation improvements for both 32- and 64-bit code.
-Instruction scheduling support for the Freescale e500mc and e5500 cores has
-been added.
-
-PTX/NVPTX Target Improvements
------------------------------
-
-The PTX back-end has been replaced by the NVPTX back-end, which is based on the
-LLVM back-end used by NVIDIA in their CUDA (nvcc) and OpenCL compiler.  Some
-highlights include:
-
-#. Compatibility with PTX 3.1 and SM 3.5.
-#. Support for NVVM intrinsics as defined in the NVIDIA Compiler SDK.
-#. Full compatibility with old PTX back-end, with much greater coverage of LLVM
-   SIR.
-
-Please submit any back-end bugs to the LLVM Bugzilla site.
-
-Other Target Specific Improvements
-----------------------------------
-
-#. ...
-
-Major Changes and Removed Features
-----------------------------------
-
-If you're already an LLVM user or developer with out-of-tree changes based on
-LLVM 3.2, this section lists some "gotchas" that you may run into upgrading
-from the previous release.
-
-#. The CellSPU port has been removed.  It can still be found in older versions.
-#. ...
-
-Internal API Changes
---------------------
-
-In addition, many APIs have changed in this release.  Some of the major LLVM
-API changes are:
-
-We've added a new interface for allowing IR-level passes to access
-target-specific information.  A new IR-level pass, called
-``TargetTransformInfo`` provides a number of low-level interfaces.  LSR and
-LowerInvoke already use the new interface.
-
-The ``TargetData`` structure has been renamed to ``DataLayout`` and moved to
-``VMCore`` to remove a dependency on ``Target``.
-
-#. The IR-level extended linker APIs (for example, to link bitcode files out of
-   archives) have been removed. Any existing clients of these features should
-   move to using a linker with integrated LTO support.
-
-Tools Changes
--------------
-
-In addition, some tools have changed in this release.  Some of the changes are:
-
-#. ...
-
-Python Bindings
----------------
+Non-comprehensive list of changes in this release
+=================================================
 
-Officially supported Python bindings have been added!  Feature support is far
-from complete.  The current bindings support interfaces to:
+.. NOTE
+   For small 1-3 sentence descriptions, just add an entry at the end of
+   this list. If your description won't fit comfortably in one bullet
+   point (e.g. maybe you would like to give an example of the
+   functionality, or simply have a lot to talk about), see the `NOTE` below
+   for adding a new subsection.
 
-#. ...
+* The CellSPU port has been removed.  It can still be found in older versions.
 
-Known Problems
-==============
+* The IR-level extended linker APIs (for example, to link bitcode files out of
+  archives) have been removed. Any existing clients of these features should
+  move to using a linker with integrated LTO support.
 
-LLVM is generally a production quality compiler, and is used by a broad range
-of applications and shipping in many products.  That said, not every subsystem
-is as mature as the aggregate, particularly the more obscure1 targets.  If you
-run into a problem, please check the `LLVM bug database
-<http://llvm.org/bugs/>`_ and submit a bug if there isn't already one or ask on
-the `LLVMdev list <http://lists.cs.uiuc.edu/mailman/listinfo/llvmdev>`_.
+* ... next change ...
 
-Known problem areas include:
+.. NOTE
+   If you would like to document a larger change, then you can add a
+   subsection about it right here. You can copy the following boilerplate
+   and un-indent it (the indentation causes it to be inside this comment).
 
-#. The MSP430 and XCore backends are experimental.
+   Special New Feature
+   -------------------
 
-#. The integrated assembler, disassembler, and JIT is not supported by several
-   targets.  If an integrated assembler is not supported, then a system
-   assembler is required.  For more details, see the
-   :ref:`target-feature-matrix`.
+   Makes programs 10x faster by doing Special New Thing.
 
 Additional Information
 ======================