diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h index c1d3d2da119..b3c750979aa 100644 --- a/arch/arc/include/asm/cache.h +++ b/arch/arc/include/asm/cache.h @@ -60,7 +60,7 @@ extern void read_decode_cache_bcr(void); #define ARC_REG_IC_IVIC 0x10 #define ARC_REG_IC_CTRL 0x11 #define ARC_REG_IC_IVIL 0x19 -#if defined(CONFIG_ARC_MMU_V3) || defined (CONFIG_ARC_MMU_V4) +#if defined(CONFIG_ARC_MMU_V3) #define ARC_REG_IC_PTAG 0x1E #endif @@ -74,7 +74,7 @@ extern void read_decode_cache_bcr(void); #define ARC_REG_DC_IVDL 0x4A #define ARC_REG_DC_FLSH 0x4B #define ARC_REG_DC_FLDL 0x4C -#if defined(CONFIG_ARC_MMU_V3) || defined (CONFIG_ARC_MMU_V4) +#if defined(CONFIG_ARC_MMU_V3) #define ARC_REG_DC_PTAG 0x5C #endif diff --git a/arch/arc/include/uapi/asm/ptrace.h b/arch/arc/include/uapi/asm/ptrace.h index 2618cc13ba7..76a7739aab1 100644 --- a/arch/arc/include/uapi/asm/ptrace.h +++ b/arch/arc/include/uapi/asm/ptrace.h @@ -11,6 +11,7 @@ #ifndef _UAPI__ASM_ARC_PTRACE_H #define _UAPI__ASM_ARC_PTRACE_H +#define PTRACE_GET_THREAD_AREA 25 #ifndef __ASSEMBLY__ /* diff --git a/arch/arc/kernel/ctx_sw_asm.S b/arch/arc/kernel/ctx_sw_asm.S index 2ff0347a2fd..e248594097e 100644 --- a/arch/arc/kernel/ctx_sw_asm.S +++ b/arch/arc/kernel/ctx_sw_asm.S @@ -10,9 +10,9 @@ * -This is the more "natural" hand written assembler */ +#include <linux/linkage.h> #include <asm/entry.h> /* For the SAVE_* macros */ #include <asm/asm-offsets.h> -#include <asm/linkage.h> #define KSP_WORD_OFF ((TASK_THREAD + THREAD_KSP) / 4) diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c index 0b3ef4025d8..fffdb5e41b2 100644 --- a/arch/arc/kernel/devtree.c +++ b/arch/arc/kernel/devtree.c @@ -41,7 +41,7 @@ const struct machine_desc * __init setup_machine_fdt(void *dt) { const struct machine_desc *mdesc; unsigned long dt_root; - void *clk; + const void *clk; int len; if (!early_init_dt_scan(dt)) diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S index 07a58f2d307..4d2481bd8b9 100644 --- a/arch/arc/kernel/head.S +++ b/arch/arc/kernel/head.S @@ -77,10 +77,11 @@ stext: ; Clear BSS before updating any globals ; XXX: use ZOL here mov r5, __bss_start - mov r6, __bss_stop + sub r6, __bss_stop, r5 + lsr.f lp_count, r6, 2 + lpnz 1f + st.ab 0, [r5, 4] 1: - st.ab 0, [r5,4] - brlt r5, r6, 1b ; Uboot - kernel ABI ; r0 = [0] No uboot interaction, [1] cmdline in r2, [2] DTB in r2 diff --git a/arch/arc/kernel/ptrace.c b/arch/arc/kernel/ptrace.c index 5d76706139d..13b3ffb27a3 100644 --- a/arch/arc/kernel/ptrace.c +++ b/arch/arc/kernel/ptrace.c @@ -146,6 +146,10 @@ long arch_ptrace(struct task_struct *child, long request, pr_debug("REQ=%ld: ADDR =0x%lx, DATA=0x%lx)\n", request, addr, data); switch (request) { + case PTRACE_GET_THREAD_AREA: + ret = put_user(task_thread_info(child)->thr_ptr, + (unsigned long __user *)data); + break; default: ret = ptrace_request(child, request, addr, data); break; diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c index cf90b6f4d3e..c802bb50060 100644 --- a/arch/arc/kernel/smp.c +++ b/arch/arc/kernel/smp.c @@ -337,8 +337,19 @@ irqreturn_t do_IPI(int irq, void *dev_id) * API called by platform code to hookup arch-common ISR to their IPI IRQ */ static DEFINE_PER_CPU(int, ipi_dev); + +static struct irqaction arc_ipi_irq = { + .name = "IPI Interrupt", + .flags = IRQF_PERCPU, + .handler = do_IPI, +}; + int smp_ipi_irq_setup(int cpu, int irq) { - int *dev_id = &per_cpu(ipi_dev, smp_processor_id()); - return request_percpu_irq(irq, do_IPI, "IPI Interrupt", dev_id); + if (!cpu) + return setup_irq(irq, &arc_ipi_irq); + else + arch_unmask_irq(irq); + + return 0; } diff --git a/arch/arc/kernel/vmlinux.lds.S b/arch/arc/kernel/vmlinux.lds.S index 2555f5886af..dd35bde39f6 100644 --- a/arch/arc/kernel/vmlinux.lds.S +++ b/arch/arc/kernel/vmlinux.lds.S @@ -116,7 +116,7 @@ SECTIONS _edata = .; - BSS_SECTION(0, 0, 0) + BSS_SECTION(4, 4, 4) #ifdef CONFIG_ARC_DW2_UNWIND . = ALIGN(PAGE_SIZE); diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c index 1f676c4794e..353b202c37c 100644 --- a/arch/arc/mm/cache_arc700.c +++ b/arch/arc/mm/cache_arc700.c @@ -389,7 +389,7 @@ static inline void __dc_line_op(unsigned long paddr, unsigned long vaddr, /*********************************************************** * Machine specific helper for per line I-Cache invalidate. */ -static void __ic_line_inv_vaddr(unsigned long paddr, unsigned long vaddr, +static void __ic_line_inv_vaddr_local(unsigned long paddr, unsigned long vaddr, unsigned long sz) { unsigned long flags; @@ -405,6 +405,23 @@ static inline void __ic_entire_inv(void) read_aux_reg(ARC_REG_IC_CTRL); /* blocks */ } +struct ic_line_inv_vaddr_ipi { + unsigned long paddr, vaddr; + int sz; +}; + +static void __ic_line_inv_vaddr_helper(void *info) +{ + struct ic_line_inv_vaddr_ipi *ic_inv = (struct ic_line_inv_vaddr_ipi*) info; + __ic_line_inv_vaddr_local(ic_inv->paddr, ic_inv->vaddr, ic_inv->sz); +} + +static void __ic_line_inv_vaddr(unsigned long paddr, unsigned long vaddr, + unsigned long sz) +{ + struct ic_line_inv_vaddr_ipi ic_inv = { paddr, vaddr , sz}; + on_each_cpu(__ic_line_inv_vaddr_helper, &ic_inv, 1); +} #else #define __ic_entire_inv() @@ -553,12 +570,8 @@ void flush_icache_range(unsigned long kstart, unsigned long kend) */ void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len) { - unsigned long flags; - - local_irq_save(flags); - __ic_line_inv_vaddr(paddr, vaddr, len); __dc_line_op(paddr, vaddr, len, OP_FLUSH_N_INV); - local_irq_restore(flags); + __ic_line_inv_vaddr(paddr, vaddr, len); } /* wrapper to compile time eliminate alignment checks in flush loop */ diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 87b63fde06d..245058b3b0e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -175,13 +175,6 @@ config ARCH_HAS_ILOG2_U32 config ARCH_HAS_ILOG2_U64 bool -config ARCH_HAS_CPUFREQ - bool - help - Internal node to signify that the ARCH has CPUFREQ support - and that the relevant menu configurations are displayed for - it. - config ARCH_HAS_BANDGAP bool @@ -318,7 +311,6 @@ config ARCH_MULTIPLATFORM config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" - select ARCH_HAS_CPUFREQ select ARM_AMBA select ARM_PATCH_PHYS_VIRT select AUTO_ZRELADDR @@ -538,7 +530,6 @@ config ARCH_DOVE config ARCH_KIRKWOOD bool "Marvell Kirkwood" - select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select CPU_FEROCEON select GENERIC_CLOCKEVENTS @@ -637,7 +628,6 @@ config ARCH_LPC32XX config ARCH_PXA bool "PXA2xx/PXA3xx-based" depends on MMU - select ARCH_HAS_CPUFREQ select ARCH_MTD_XIP select ARCH_REQUIRE_GPIOLIB select ARM_CPU_SUSPEND if PM @@ -707,7 +697,6 @@ config ARCH_RPC config ARCH_SA1100 bool "SA1100-based" - select ARCH_HAS_CPUFREQ select ARCH_MTD_XIP select ARCH_REQUIRE_GPIOLIB select ARCH_SPARSEMEM_ENABLE @@ -725,7 +714,6 @@ config ARCH_SA1100 config ARCH_S3C24XX bool "Samsung S3C24XX SoCs" - select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select ATAGS select CLKDEV_LOOKUP @@ -746,7 +734,6 @@ config ARCH_S3C24XX config ARCH_S3C64XX bool "Samsung S3C64XX" - select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_VIC @@ -809,7 +796,6 @@ config ARCH_S5PC100 config ARCH_S5PV210 bool "Samsung S5PV210/S5PC110" - select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_SPARSEMEM_ENABLE select ATAGS @@ -845,7 +831,6 @@ config ARCH_DAVINCI config ARCH_OMAP1 bool "TI OMAP1" depends on MMU - select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_OMAP select ARCH_REQUIRE_GPIOLIB @@ -1009,8 +994,6 @@ source "arch/arm/mach-rockchip/Kconfig" source "arch/arm/mach-sa1100/Kconfig" -source "arch/arm/plat-samsung/Kconfig" - source "arch/arm/mach-socfpga/Kconfig" source "arch/arm/mach-spear/Kconfig" @@ -1028,6 +1011,7 @@ source "arch/arm/mach-s5pc100/Kconfig" source "arch/arm/mach-s5pv210/Kconfig" source "arch/arm/mach-exynos/Kconfig" +source "arch/arm/plat-samsung/Kconfig" source "arch/arm/mach-shmobile/Kconfig" @@ -2109,9 +2093,7 @@ endmenu menu "CPU Power Management" -if ARCH_HAS_CPUFREQ source "drivers/cpufreq/Kconfig" -endif source "drivers/cpuidle/Kconfig" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5986ff63b90..adb5ed9e269 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -357,7 +357,7 @@ dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \ stih415-b2020.dtb \ stih416-b2000.dtb \ stih416-b2020.dtb \ - stih416-b2020-revE.dtb + stih416-b2020e.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-cubieboard.dtb \ diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index ecb267767cf..e2156a583de 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -529,8 +529,8 @@ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 0 0 1 2 >; - tx-num-evt = <1>; - rx-num-evt = <1>; + tx-num-evt = <32>; + rx-num-evt = <32>; }; &tps { diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index ab9a34ce524..80a3b215e7d 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -560,8 +560,8 @@ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 0 0 1 2 >; - tx-num-evt = <1>; - rx-num-evt = <1>; + tx-num-evt = <32>; + rx-num-evt = <32>; }; &tscadc { diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 8a0a72dc7dd..a1a0cc5eb35 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -105,10 +105,16 @@ &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; + phy-mode = "rmii"; }; &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; + phy-mode = "rmii"; +}; + +&phy_sel { + rmii-clock-ext; }; &elm { diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 19f1f7e8759..90098f98a5c 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -319,6 +319,10 @@ phy-mode = "rmii"; }; +&phy_sel { + rmii-clock-ext; +}; + &i2c0 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index 772fec2d26c..1e2919d43d7 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -91,6 +91,8 @@ marvell,nand-keep-config; marvell,nand-enable-arbiter; nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; partition@0 { label = "U-Boot"; diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi index e69bc6759c3..4173a8ab34e 100644 --- a/arch/arm/boot/dts/armada-380.dtsi +++ b/arch/arm/boot/dts/armada-380.dtsi @@ -16,7 +16,7 @@ / { model = "Marvell Armada 380 family SoC"; - compatible = "marvell,armada380", "marvell,armada38x"; + compatible = "marvell,armada380"; cpus { #address-cells = <1>; diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts index ff9637dd8d0..1af886f1e48 100644 --- a/arch/arm/boot/dts/armada-385-db.dts +++ b/arch/arm/boot/dts/armada-385-db.dts @@ -16,7 +16,7 @@ / { model = "Marvell Armada 385 Development Board"; - compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada38x"; + compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada380"; chosen { bootargs = "console=ttyS0,115200 earlyprintk"; @@ -98,6 +98,8 @@ marvell,nand-keep-config; marvell,nand-enable-arbiter; nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; partition@0 { label = "U-Boot"; diff --git a/arch/arm/boot/dts/armada-385-rd.dts b/arch/arm/boot/dts/armada-385-rd.dts index 40893255a3f..aaca2861dc8 100644 --- a/arch/arm/boot/dts/armada-385-rd.dts +++ b/arch/arm/boot/dts/armada-385-rd.dts @@ -17,7 +17,7 @@ / { model = "Marvell Armada 385 Reference Design"; - compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada38x"; + compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380"; chosen { bootargs = "console=ttyS0,115200 earlyprintk"; diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi index f011009bf4c..6283d7912f7 100644 --- a/arch/arm/boot/dts/armada-385.dtsi +++ b/arch/arm/boot/dts/armada-385.dtsi @@ -16,7 +16,7 @@ / { model = "Marvell Armada 385 family SoC"; - compatible = "marvell,armada385", "marvell,armada38x"; + compatible = "marvell,armada385", "marvell,armada380"; cpus { #address-cells = <1>; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 3de364e81b5..689fa1a4672 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -20,7 +20,7 @@ / { model = "Marvell Armada 38x family SoC"; - compatible = "marvell,armada38x"; + compatible = "marvell,armada380"; aliases { gpio0 = &gpio0; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index e5c6a0492ca..4e5a59ee150 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -25,7 +25,7 @@ memory { device_type = "memory"; - reg = <0 0x00000000 0 0xC0000000>; /* 3 GB */ + reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */ }; soc { diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index b309c1c6e84..04927db1d6b 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -568,24 +568,17 @@ #size-cells = <0>; #interrupt-cells = <1>; - slow_rc_osc: slow_rc_osc { - compatible = "fixed-clock"; + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; #clock-cells = <0>; - clock-frequency = <32768>; - clock-accuracy = <50000000>; - }; - - clk32k: slck { - compatible = "atmel,at91sam9260-clk-slow"; - #clock-cells = <0>; - clocks = <&slow_rc_osc &slow_xtal>; + interrupts-extended = <&pmc AT91_PMC_MOSCS>; + clocks = <&main_xtal>; }; main: mainck { compatible = "atmel,at91rm9200-clk-main"; #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&main_xtal>; + clocks = <&main_osc>; }; plla: pllack { @@ -615,7 +608,7 @@ compatible = "atmel,at91rm9200-clk-master"; #clock-cells = <0>; interrupts-extended = <&pmc AT91_PMC_MCKRDY>; - clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; + clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; atmel,clk-output-range = <0 94000000>; atmel,clk-divisors = <1 2 4 0>; }; @@ -632,7 +625,7 @@ #address-cells = <1>; #size-cells = <0>; interrupt-parent = <&pmc>; - clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; + clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; prog0: prog0 { #clock-cells = <0>; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index c6683ea8b74..aa35a7aec9a 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -20,6 +20,10 @@ reg = <0x20000000 0x4000000>; }; + slow_xtal { + clock-frequency = <32768>; + }; + main_xtal { clock-frequency = <18432000>; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index d1b82e6635d..287795985e3 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -132,8 +132,8 @@ <595000000 650000000 3 0>, <545000000 600000000 0 1>, <495000000 555000000 1 1>, - <445000000 500000000 1 2>, - <400000000 450000000 1 3>; + <445000000 500000000 2 1>, + <400000000 450000000 3 1>; }; plladiv: plladivck { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 1a57298636a..2ebc42140ea 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -140,8 +140,8 @@ 595000000 650000000 3 0 545000000 600000000 0 1 495000000 555000000 1 1 - 445000000 500000000 1 2 - 400000000 450000000 1 3>; + 445000000 500000000 2 1 + 400000000 450000000 3 1>; }; plladiv: plladivck { @@ -1045,6 +1045,8 @@ reg = <0x00500000 0x80000 0xf803c000 0x400>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&usb>, <&udphs_clk>; + clock-names = "hclk", "pclk"; status = "disabled"; ep0 { diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 4adc28039c3..83089540e32 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -240,6 +240,7 @@ regulator-name = "ldo3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; regulator-boot-on; }; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index c29945e07c5..80127638b37 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -773,7 +773,6 @@ clocks = <&qspi_gfclk_div>; clock-names = "fck"; num-cs = <4>; - interrupts = <0 343 0x4>; status = "disabled"; }; @@ -984,6 +983,17 @@ #size-cells = <1>; status = "disabled"; }; + + atl: atl@4843c000 { + compatible = "ti,dra7-atl"; + reg = <0x4843c000 0x3ff>; + ti,hwmods = "atl"; + ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>, + <&atl_clkin2_ck>, <&atl_clkin3_ck>; + clocks = <&atl_gfclk_mux>; + clock-names = "fck"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index b03cfe49d22..dc7a292fe93 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -10,26 +10,26 @@ &cm_core_aon_clocks { atl_clkin0_ck: atl_clkin0_ck { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; }; atl_clkin1_ck: atl_clkin1_ck { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; }; atl_clkin2_ck: atl_clkin2_ck { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; }; atl_clkin3_ck: atl_clkin3_ck { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; }; hdmi_clkin_ck: hdmi_clkin_ck { @@ -673,10 +673,12 @@ l3_iclk_div: l3_iclk_div { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,divider-clock"; + ti,max-div = <2>; + ti,bit-shift = <4>; + reg = <0x0100>; clocks = <&dpll_core_h12x2_ck>; - clock-mult = <1>; - clock-div = <1>; + ti,index-power-of-two; }; l4_root_clk_div: l4_root_clk_div { @@ -684,7 +686,7 @@ compatible = "fixed-factor-clock"; clocks = <&l3_iclk_div>; clock-mult = <1>; - clock-div = <1>; + clock-div = <2>; }; video1_clk2_div: video1_clk2_div { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index b8ece4be41c..17b22e9cc2a 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -113,7 +113,7 @@ compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; - reg = <0x10490000 0x1000>, <0x10480000 0x100>; + reg = <0x10490000 0x10000>, <0x10480000 0x10000>; }; combiner: interrupt-controller@10440000 { @@ -554,7 +554,7 @@ interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>; clocks = <&clock CLK_PWM>; clock-names = "timers"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index e38532271ef..15957227ffd 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -167,7 +167,7 @@ compatible = "samsung,exynos5420-audss-clock"; reg = <0x03810000 0x0C>; #clock-cells = <1>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>, + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>, <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>; clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; }; @@ -260,6 +260,9 @@ mfc_pd: power-domain@10044060 { compatible = "samsung,exynos4210-pd"; reg = <0x10044060 0x20>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>, + <&clock CLK_MOUT_USER_ACLK333>; + clock-names = "oscclk", "pclk0", "clk0"; }; disp_pd: power-domain@100440C0 { diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 6bc3243a80d..181d77fa2fa 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -315,15 +315,15 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - fsl,cd-controller; - fsl,wp-controller; + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; status = "okay"; }; &esdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc2>; - cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -468,8 +468,8 @@ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 - MX51_PAD_GPIO1_0__SD1_CD 0x20d5 - MX51_PAD_GPIO1_1__SD1_WP 0x20d5 + MX51_PAD_GPIO1_0__GPIO1_0 0x100 + MX51_PAD_GPIO1_1__GPIO1_1 0x100 >; }; diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index 75e66c9c614..31cfb7f2b02 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -107,7 +107,7 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>; - fsl,cd-controller; + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -206,7 +206,7 @@ pinctrl_esdhc1_cd: esdhc1_cd { fsl,pins = < - MX51_PAD_GPIO1_0__SD1_CD 0x20d5 + MX51_PAD_GPIO1_0__GPIO1_0 0xd5 >; }; diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index d5d146a8b14..c4956b0ffb3 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -21,27 +21,25 @@ <0xb0000000 0x20000000>; }; - soc { - display1: display@di1 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "bgr666"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu_disp1>; - - display-timings { - 800x480p60 { - native-mode; - clock-frequency = <31500000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <40>; - hback-porch = <88>; - hsync-len = <128>; - vback-porch = <33>; - vfront-porch = <9>; - vsync-len = <3>; - vsync-active = <1>; - }; + display1: display@di1 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp1>; + + display-timings { + 800x480p60 { + native-mode; + clock-frequency = <31500000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <128>; + vback-porch = <33>; + vfront-porch = <9>; + vsync-len = <3>; + vsync-active = <1>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index 5373a5f2782..c8e51dd41b8 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -143,6 +143,14 @@ fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>; }; + pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id { + /* + * Similar to pinctrl_usbotg_2, but we want it + * pulled down for a fixed host connection. + */ + fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; + }; + pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus { fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>; }; @@ -178,6 +186,8 @@ }; &usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; vbus-supply = <®_usbotg_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-gw51xx.dts b/arch/arm/boot/dts/imx6q-gw51xx.dts index af4929aee07..0e1406e58ef 100644 --- a/arch/arm/boot/dts/imx6q-gw51xx.dts +++ b/arch/arm/boot/dts/imx6q-gw51xx.dts @@ -11,7 +11,7 @@ /dts-v1/; #include "imx6q.dtsi" -#include "imx6qdl-gw54xx.dtsi" +#include "imx6qdl-gw51xx.dtsi" / { model = "Gateworks Ventana i.MX6 Quad GW51XX"; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index 25da82a0311..e8e781656b3 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -12,6 +12,19 @@ pinctrl-0 = <&pinctrl_cubox_i_ir>; }; + pwmleds { + compatible = "pwm-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_pwm1>; + + front { + active-low; + label = "imx6:red:front"; + max-brightness = <248>; + pwms = <&pwm1 0 50000>; + }; + }; + regulators { compatible = "simple-bus"; @@ -109,6 +122,10 @@ >; }; + pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led { + fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>; + }; + pinctrl_cubox_i_spdif: cubox-i-spdif { fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; }; @@ -117,6 +134,14 @@ fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>; }; + pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id { + /* + * The Cubox-i pulls this low, but as it's pointless + * leaving it as a pull-up, even if it is just 10uA. + */ + fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; + }; + pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus { fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>; }; @@ -153,6 +178,8 @@ }; &usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>; vbus-supply = <®_usbotg_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 31665adcbf3..0db15af41cb 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -161,7 +161,7 @@ status = "okay"; pmic: ltc3676@3c { - compatible = "ltc,ltc3676"; + compatible = "lltc,ltc3676"; reg = <0x3c>; regulators { diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 367af3ec943..744c8a2d81f 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -220,7 +220,7 @@ }; pmic: ltc3676@3c { - compatible = "ltc,ltc3676"; + compatible = "lltc,ltc3676"; reg = <0x3c>; regulators { @@ -288,7 +288,7 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clocks = <&clks 169>; + clocks = <&clks 201>; VDDA-supply = <®_1p8v>; VDDIO-supply = <®_3p3v>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index c91b5a6c769..adf150c1be9 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -234,7 +234,7 @@ }; pmic: ltc3676@3c { - compatible = "ltc,ltc3676"; + compatible = "lltc,ltc3676"; reg = <0x3c>; regulators { diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi index d729d0b15f2..79eac6849d4 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi @@ -10,14 +10,6 @@ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 >; }; - - pinctrl_microsom_usbotg: microsom-usbotg { - /* - * Similar to pinctrl_usbotg_2, but we want it - * pulled down for a fixed host connection. - */ - fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; - }; }; }; @@ -26,8 +18,3 @@ pinctrl-0 = <&pinctrl_microsom_uart1>; status = "okay"; }; - -&usbotg { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_microsom_usbotg>; -}; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 2d4e5285f3f..57d4abe03a9 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -686,7 +686,7 @@ compatible = "fsl,imx6sl-fec", "fsl,imx25-fec"; reg = <0x02188000 0x4000>; interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_ENET_REF>, + clocks = <&clks IMX6SL_CLK_ENET>, <&clks IMX6SL_CLK_ENET_REF>; clock-names = "ipg", "ahb"; status = "disabled"; diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts index c5a1fc75c7a..b2d9834bf45 100644 --- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts +++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts @@ -105,7 +105,6 @@ compatible = "ethernet-phy-id0141.0cb0", "ethernet-phy-ieee802.3-c22"; reg = <0>; - phy-connection-type = "rgmii-id"; }; ethphy1: ethernet-phy@1 { @@ -113,7 +112,6 @@ compatible = "ethernet-phy-id0141.0cb0", "ethernet-phy-ieee802.3-c22"; reg = <1>; - phy-connection-type = "rgmii-id"; }; }; @@ -121,6 +119,7 @@ status = "okay"; ethernet0-port@0 { phy-handle = <ðphy0>; + phy-connection-type = "rgmii-id"; }; }; @@ -128,5 +127,6 @@ status = "okay"; ethernet1-port@0 { phy-handle = <ðphy1>; + phy-connection-type = "rgmii-id"; }; }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index cf0be662297..1becefce821 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -251,6 +251,11 @@ codec { }; }; + + twl_power: power { + compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off"; + ti,use_poweroff; + }; }; }; @@ -301,6 +306,7 @@ }; &uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index 8ae8f007c8a..c8747c7f1cc 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -50,6 +50,13 @@ gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; }; +&twl { + twl_power: power { + compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle"; + ti,use_poweroff; + }; +}; + &i2c2 { clock-frequency = <400000>; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index ae8ae3f4f9b..1fe45d1f75e 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -351,6 +351,11 @@ compatible = "ti,twl4030-audio"; ti,enable-vibra = <1>; }; + + twl_power: power { + compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off"; + ti,use_poweroff; + }; }; &twl_keypad { diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 3bfda16c8b5..a4ed5498886 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -45,7 +45,6 @@ operating-points = < /* kHz uV */ - 500000 880000 1000000 1060000 1500000 1250000 >; diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi index d6f254f302f..a0f6f75fe3b 100644 --- a/arch/arm/boot/dts/stih415.dtsi +++ b/arch/arm/boot/dts/stih415.dtsi @@ -169,8 +169,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii0>; - clock-names = "stmmaceth"; - clocks = <&clk_s_a1_ls CLK_GMAC0_PHY>; + clock-names = "stmmaceth", "sti-ethclk"; + clocks = <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>; }; ethernet1: dwmac@fef08000 { @@ -192,8 +192,8 @@ reset-names = "stmmaceth"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii1>; - clock-names = "stmmaceth"; - clocks = <&clk_s_a0_ls CLK_ETH1_PHY>; + clock-names = "stmmaceth", "sti-ethclk"; + clocks = <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>; }; rc: rc@fe518000 { diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020e.dts index ba0fa2caaf1..ba0fa2caaf1 100644 --- a/arch/arm/boot/dts/stih416-b2020-revE.dts +++ b/arch/arm/boot/dts/stih416-b2020e.dts diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi |