/*
BlueZ - Bluetooth protocol stack for Linux
Copyright (C) 2000-2001 Qualcomm Incorporated
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License version 2 as
published by the Free Software Foundation;
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
SOFTWARE IS DISCLAIMED.
*/
#ifndef __HCI_H
#define __HCI_H
#define HCI_MAX_ACL_SIZE 1024
#define HCI_MAX_SCO_SIZE 255
#define HCI_MAX_EVENT_SIZE 260
#define HCI_MAX_FRAME_SIZE (HCI_MAX_ACL_SIZE + 4)
/* HCI dev events */
#define HCI_DEV_REG 1
#define HCI_DEV_UNREG 2
#define HCI_DEV_UP 3
#define HCI_DEV_DOWN 4
#define HCI_DEV_SUSPEND 5
#define HCI_DEV_RESUME 6
/* HCI notify events */
#define HCI_NOTIFY_CONN_ADD 1
#define HCI_NOTIFY_CONN_DEL 2
#define HCI_NOTIFY_VOICE_SETTING 3
/* HCI bus types */
#define HCI_VIRTUAL 0
#define HCI_USB 1
#define HCI_PCCARD 2
#define HCI_UART 3
#define HCI_RS232 4
#define HCI_PCI 5
#define HCI_SDIO 6
/* HCI controller types */
#define HCI_BREDR 0x00
#define HCI_AMP 0x01
/* HCI device quirks */
enum {
HCI_QUIRK_NO_RESET,
HCI_QUIRK_RAW_DEVICE,
HCI_QUIRK_FIXUP_BUFFER_SIZE
};
/* HCI device flags */
enum {
HCI_UP,
HCI_INIT,
HCI_RUNNING,
HCI_PSCAN,
HCI_ISCAN,
HCI_AUTH,
HCI_ENCRYPT,
HCI_INQUIRY,
HCI_RAW,
HCI_SETUP,
HCI_AUTO_OFF,
HCI_MGMT,
HCI_PAIRABLE,
HCI_SERVICE_CACHE,
HCI_LINK_KEYS,
HCI_DEBUG_KEYS,
HCI_RESET,
};
/*
* BR/EDR and/or LE controller flags: the flags defined here should represent
* states from the controller.
*/
enum {
HCI_LE_SCAN,
};
/* HCI ioctl defines */
#define HCIDEVUP _IOW('H', 201, int)
#define HCIDEVDOWN _IOW('H', 202, int)
#define HCIDEVRESET _IOW('H', 203, int)
#define HCIDEVRESTAT _IOW('H', 204, int)
#define HCIGETDEVLIST _IOR('H', 210, int)
#define HCIGETDEVINFO _IOR('H', 211, int)
#define HCIGETCONNLIST _IOR('H', 212, int)
#define HCIGETCONNINFO _IOR('H', 213, int)
#define HCIGETAUTHINFO _IOR('H', 215, int)
#define HCISETRAW _IOW('H', 220, int)
#define HCISETSCAN _IOW('H', 221, int)
#define HCISETAUTH _IOW('H', 222, int)
#define HCISETENCRYPT _IOW('H', 223, int)
#define HCISETPTYPE _IOW('H', 224, int)
#define HCISETLINKPOL _IOW('H', 225, int)
#define HCISETLINKMODE _IOW('H', 226, int)
#define HCISETACLMTU _IOW('H', 227, int)
#define HCISETSCOMTU _IOW('H', 228, int)
#define HCIBLOCKADDR _IOW('H', 230, int)
#define HCIUNBLOCKADDR _IOW('H', 231, int)
#define HCIINQUIRY _IOR('H', 240, int)
/* HCI timeouts */
#define HCI_CONNECT_TIMEOUT (40000) /* 40 seconds */
#define HCI_DISCONN_TIMEOUT (2000) /* 2 seconds */
#define HCI_PAIRING_TIMEOUT (60000) /* 60 seconds */
#define HCI_IDLE_TIMEOUT (6000) /* 6 seconds */
#define HCI_INIT_TIMEOUT (10000) /* 10 seconds */
#define HCI_CMD_TIMEOUT (1000) /* 1 seconds */
/* HCI data types */
#define HCI_COMMAND_PKT 0x01
#define HCI_ACLDATA_PKT 0x02
#define HCI_SCODATA_PKT 0x03
#define HCI_EVENT_PKT 0x04
#define HCI_VENDOR_PKT 0xff
/* HCI packet types */
#define HCI_DM1 0x0008
#define HCI_DM3 0x0400
#define HCI_DM5 0x4000
#define HCI_DH1 0x0010
#define HCI_DH3 0x0800
#define HCI_DH5 0x8000
#define HCI_HV1 0x0020
#define HCI_HV2 0x0040
#define HCI_HV3 0x0080
#define SCO_PTYPE_MASK (HCI_HV1 | HCI_HV2 | HCI_HV3)
#define ACL_PTYPE_MASK (~SCO_PTYPE_MASK)
/* eSCO packet types */
#define ESCO_HV1 0x0001
#define ESCO_HV2 0x0002
#define ESCO_HV3 0x0004
#define ESCO_EV3 0x0008
#define ESCO_EV4 0x0010
#define ESCO_EV5 0x0020
#define ESCO_2EV3 0x0040
#define ESCO_3EV3 0x0080
#define ESCO_2EV5 0x0100
#define ESCO_3EV5 0x0200