1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
|
/*
* SBE 2T3E3 synchronous serial card driver for Linux
*
* Copyright (C) 2009-2010 Krzysztof Halasa <khc@pm.waw.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License
* as published by the Free Software Foundation.
*
* This code is based on a driver written by SBE Inc.
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/pci.h>
#include <linux/hdlc.h>
#include <linux/if_arp.h>
#include <linux/interrupt.h>
#include "2t3e3.h"
static void check_leds(unsigned long arg)
{
struct card *card = (struct card *)arg;
struct channel *channel0 = &card->channels[0];
static int blinker;
update_led(channel0, ++blinker);
if (has_two_ports(channel0->pdev))
update_led(&card->channels[1], blinker);
card->timer.expires = jiffies + HZ / 10;
add_timer(&card->timer);
}
static void t3e3_remove_channel(struct channel *channel)
{
struct pci_dev *pdev = channel->pdev;
struct net_device *dev = channel->dev;
/* system hangs if board asserts irq while module is unloaded */
cpld_stop_intr(channel);
free_irq(dev->irq, dev);
dc_drop_descriptor_list(channel);
unregister_hdlc_device(dev);
free_netdev(dev);
pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
}
static int __devinit t3e3_init_channel(struct channel *channel, struct pci_dev *pdev, struct card *card)
{
struct net_device *dev;
unsigned int val;
int err;
err = pci_enable_device(pdev);
if (err)
return err;
err = pci_request_regions(pdev, "SBE 2T3E3");
if (err)
goto disable;
dev = alloc_hdlcdev(channel);
if (!dev) {
printk(KERN_ERR "SBE 2T3E3" ": Out of memory\n");
goto free_regions;
}
t3e3_sc_init(channel);
dev_to_priv(dev) = channel;
channel->pdev = pdev;
channel->dev = dev;
channel->card = card;
channel->addr = pci_resource_start(pdev, 0);
if (pdev->subsystem_device == PCI_SUBDEVICE_ID_SBE_2T3E3_P1)
channel->h.slot = 1;
else
channel->h.slot = 0;
if (setup_device(dev, channel))
goto free_regions;
pci_read_config_dword(channel->pdev, 0x40, &val); /* mask sleep mode */
pci_write_config_dword(channel->pdev, 0x40, val & 0x3FFFFFFF);
pci_read_config_byte(channel->pdev, PCI_CACHE_LINE_SIZE, &channel->h.cache_size);
pci_read_config_dword(channel->pdev, PCI_COMMAND, &channel->h.command);
t3e3_init(channel);
if (request_irq(dev->irq, &t3e3_intr, IRQF_SHARED, dev->name, dev)) {
printk(KERN_WARNING "%s: could not get irq: %d\n", dev->name, dev->irq);
goto free_regions;
}
pci_set_drvdata(pdev, channel);
return 0;
free_regions:
pci_release_regions(pdev);
disable:
pci_disable_device(pdev);
return err;
}
static void __devexit t3e3_remove_card(struct pci_dev *pdev)
{
struct channel *channel0 = pci_get_drvdata(pdev);
struct card *card = channel0->card;
del_timer(&card->timer);
if (has_two_ports(channel0->pdev)) {
t3e3_remove_channel(&card->channels[1]);
pci_dev_put(card->channels[1].pdev);
}
t3e3_remove_channel(channel0);
kfree(card);
}
static int __devinit t3e3_init_card(struct pci_dev *pdev, const struct pci_device_id *ent)
{
/* pdev points to channel #0 */
struct pci_dev *pdev1 = NULL;
struct card *card;
int channels = 1, err;
if (has_two_ports(pdev)) {
while ((pdev1 = pci_get_subsys(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142,
PCI_VENDOR_ID_SBE, PCI_SUBDEVICE_ID_SBE_2T3E3_P1,
pdev1)))
if (pdev1->bus == pdev->bus &&
pdev1->devfn == pdev->devfn + 8 /* next device on the same bus */)
break; /* found the second channel */
if (!pdev1) {
printk(KERN_ERR "SBE 2T3E3" ": Can't find the second channel\n");
return -EFAULT;
}
channels = 2;
/* holds the reference for pdev1 */
}
card = kzalloc(sizeof(struct card) + channels * sizeof(struct channel), GFP_KERNEL);
if (!card) {
printk(KERN_ERR "SBE 2T3E3" ": Out of memory\n");
return -ENOBUFS;
}
spin_lock_init(&card->bootrom_lock);
card->bootrom_addr = pci_resource_start(pdev, 0);
err = t3e3_init_channel(&card->channels[0], pdev, card);
if (err)
goto free_card;
if (channels == 2) {
err = t3e3_init_channel(&card->channels[1], pdev1, card);
if (err) {
t3e3_remove_channel(&card->channels[0]);
goto free_card;
}
}
/* start LED timer */
init_timer(&card->timer);
card->timer.function = check_leds;
card->timer.expires = jiffies + HZ / 10;
card->timer.data = (unsigned long)card;
add_timer(&card->timer);
return 0;
free_card:
kfree(card);
return err;
}
static struct pci_device_id t3e3_pci_tbl[] __devinitdata = {
{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142,
PCI_VENDOR_ID_SBE, PCI_SUBDEVICE_ID_SBE_T3E3, 0, 0, 0 },
{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142,
PCI_VENDOR_ID_SBE, PCI_SUBDEVICE_ID_SBE_2T3E3_P0, 0, 0, 0 },
/* channel 1 will be initialized after channel 0 */
{ 0, }
};
static struct pci_driver t3e3_pci_driver = {
.name = "SBE T3E3",
.id_table = t3e3_pci_tbl,
.probe = t3e3_init_card,
.remove = t3e3_remove_card,
};
static int __init t3e3_init_module(void)
{
return pci_register_driver(&t3e3_pci_driver);
}
static void __exit t3e3_cleanup_module(void)
{
pci_unregister_driver(&t3e3_pci_driver);
}
module_init(t3e3_init_module);
module_exit(t3e3_cleanup_module);
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, t3e3_pci_tbl);
|
