1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
|
/* ZD1211 USB-WLAN driver for Linux
*
* Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de>
* Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include "zd_rf.h"
#include "zd_usb.h"
#include "zd_chip.h"
static const u32 rf2959_table[][2] = {
RF_CHANNEL( 1) = { 0x181979, 0x1e6666 },
RF_CHANNEL( 2) = { 0x181989, 0x1e6666 },
RF_CHANNEL( 3) = { 0x181999, 0x1e6666 },
RF_CHANNEL( 4) = { 0x1819a9, 0x1e6666 },
RF_CHANNEL( 5) = { 0x1819b9, 0x1e6666 },
RF_CHANNEL( 6) = { 0x1819c9, 0x1e6666 },
RF_CHANNEL( 7) = { 0x1819d9, 0x1e6666 },
RF_CHANNEL( 8) = { 0x1819e9, 0x1e6666 },
RF_CHANNEL( 9) = { 0x1819f9, 0x1e6666 },
RF_CHANNEL(10) = { 0x181a09, 0x1e6666 },
RF_CHANNEL(11) = { 0x181a19, 0x1e6666 },
RF_CHANNEL(12) = { 0x181a29, 0x1e6666 },
RF_CHANNEL(13) = { 0x181a39, 0x1e6666 },
RF_CHANNEL(14) = { 0x181a60, 0x1c0000 },
};
#if 0
static int bits(u32 rw, int from, int to)
{
rw &= ~(0xffffffffU << (to+1));
rw >>= from;
return rw;
}
static int bit(u32 rw, int bit)
{
return bits(rw, bit, bit);
}
static void dump_regwrite(u32 rw)
{
int reg = bits(rw, 18, 22);
int rw_flag = bits(rw, 23, 23);
PDEBUG("rf2959 %#010x reg %d rw %d", rw, reg, rw_flag);
switch (reg) {
case 0:
PDEBUG("reg0 CFG1 ref_sel %d hybernate %d rf_vco_reg_en %d"
" if_vco_reg_en %d if_vga_en %d",
bits(rw, 14, 15), bit(rw, 3), bit(rw, 2), bit(rw, 1),
bit(rw, 0));
break;
case 1:
PDEBUG("reg1 IFPLL1 pll_en1 %d kv_en1 %d vtc_en1 %d lpf1 %d"
" cpl1 %d pdp1 %d autocal_en1 %d ld_en1 %d ifloopr %d"
" ifloopc %d dac1 %d",
bit(rw, 17), bit(rw, 16), bit(rw, 15), bit(rw, 14),
bit(rw, 13), bit(rw, 12), bit(rw, 11), bit(rw, 10),
bits(rw, 7, 9), bits(rw, 4, 6), bits(rw, 0, 3));
break;
case 2:
PDEBUG("reg2 IFPLL2 n1 %d num1 %d",
bits(rw, 6, 17), bits(rw, 0, 5));
break;
case 3:
PDEBUG("reg3 IFPLL3 num %d", bits(rw, 0, 17));
break;
case 4:
PDEBUG("reg4 IFPLL4 dn1 %#04x ct_def1 %d kv_def1 %d",
bits(rw, 8, 16), bits(rw, 4, 7), bits(rw, 0, 3));
break;
case 5:
PDEBUG("reg5 RFPLL1 pll_en %d kv_en %d vtc_en %d lpf %d cpl %d"
" pdp %d autocal_en %d ld_en %d rfloopr %d rfloopc %d"
" dac %d",
bit(rw, 17), bit(rw, 16), bit(rw, 15), bit(rw, 14),
bit(rw, 13), bit(rw, 12), bit(rw, 11), bit(rw, 10),
bits(rw, 7, 9), bits(rw, 4, 6), bits(rw, 0,3));
break;
case 6:
PDEBUG("reg6 RFPLL2 n %d num %d",
bits(rw, 6, 17), bits(rw, 0, 5));
break;
case 7:
PDEBUG("reg7 RFPLL3 num2 %d", bits(rw, 0, 17));
break;
case 8:
PDEBUG("reg8 RFPLL4 dn %#06x ct_def %d kv_def %d",
bits(rw, 8, 16), bits(rw, 4, 7), bits(rw, 0, 3));
break;
case 9:
PDEBUG("reg9 CAL1 tvco %d tlock %d m_ct_value %d ld_window %d",
bits(rw, 13, 17), bits(rw, 8, 12), bits(rw, 3, 7),
bits(rw, 0, 2));
break;
case 10:
PDEBUG("reg10 TXRX1 rxdcfbbyps %d pcontrol %d txvgc %d"
" rxlpfbw %d txlpfbw %d txdiffmode %d txenmode %d"
" intbiasen %d tybypass %d",
bit(rw, 17), bits(rw, 15, 16), bits(rw, 10, 14),
bits(rw, 7, 9), bits(rw, 4, 6), bit(rw, 3), bit(rw, 2),
bit(rw, 1), bit(rw, 0));
break;
case 11:
PDEBUG("reg11 PCNT1 mid_bias %d p_desired %d pc_offset %d"
" tx_delay %d",
bits(rw, 15, 17), bits(rw, 9, 14), bits(rw, 3, 8),
bits(rw, 0, 2));
break;
case 12:
PDEBUG("reg12 PCNT2 max_power %d mid_power %d min_power %d",
bits(rw, 12, 17), bits(rw, 6, 11), bits(rw, 0, 5));
break;
case 13:
PDEBUG("reg13 VCOT1 rfpll vco comp %d ifpll vco comp %d"
" lobias %d if_biasbuf %d if_biasvco %d rf_biasbuf %d"
" rf_biasvco %d",
bit(rw, 17), bit(rw, 16), bit(rw, 15),
bits(rw, 8, 9), bits(rw, 5, 7), bits(rw, 3, 4),
bits(rw, 0, 2));
break;
case 14:
PDEBUG("reg14 IQCAL rx_acal %d rx_pcal %d"
" tx_acal %d tx_pcal %d",
bits(rw, 13, 17), bits(rw, 9, 12), bits(rw, 4, 8),
bits(rw, 0, 3));
break;
}
}
#endif /* 0 */
static int rf2959_init_hw(struct zd_rf *rf)
{
int r;
struct zd_chip *chip = zd_rf_to_chip(rf);
static const struct zd_ioreq16 ioreqs[] = {
{ CR2, 0x1E }, { CR9, 0x20 }, { CR10, 0x89 },
{ CR11, 0x00 }, { CR15, 0xD0 }, { CR17, 0x68 },
{ CR19, 0x4a }, { CR20, 0x0c }, { CR21, 0x0E },
{ CR23, 0x48 },
/* normal size for cca threshold */
{ CR24, 0x14 },
/* { CR24, 0x20 }, */
{ CR26, 0x90 }, { CR27, 0x30 }, { CR29, 0x20 },
{ CR31, 0xb2 }, { CR32, 0x43 }, { CR33, 0x28 },
{ CR38, 0x30 }, { CR34, 0x0f }, { CR35, 0xF0 },
{ CR41, 0x2a }, { CR46, 0x7F }, { CR47, 0x1E },
{ CR51, 0xc5 }, { CR52, 0xc5 }, { CR53, 0xc5 },
{ CR79, 0x58 }, { CR80, 0x30 }, { CR81, 0x30 },
{ CR82, 0x00 }, { CR83, 0x24 }, { CR84, 0x04 },
{ CR85, 0x00 }, { CR86, 0x10 }, { CR87, 0x2A },
{ CR88, 0x10 }, { CR89, 0x24 }, { CR90, 0x18 },
/* { CR91, 0x18 }, */
/* should solve continuous CTS frame problems */
{ CR91, 0x00 },
{ CR92, 0x0a }, { CR93, 0x00 }, { CR94, 0x01 },
{ CR95, 0x00 }, { CR96, 0x40 }, { CR97, 0x37 },
{ CR98, 0x05 }, { CR99, 0x28 }, { CR100, 0x00 },
{ CR101, 0x13 }, { CR102, 0x27 }, { CR103, 0x27 },
{ CR104, 0x18 }, { CR105, 0x12 },
/* normal size */
{ CR106, 0x1a },
/* { CR106, 0x22 }, */
{ CR107, 0x24 }, { CR108, 0x0a }, { CR109, 0x13 },
{ CR110, 0x2F }, { CR111, 0x27 }, { CR112, 0x27 },
{ CR113, 0x27 }, { CR114, 0x27 }, { CR115, 0x40 },
{ CR116, 0x40 }, { CR117, 0xF0 }, { CR118, 0xF0 },
{ CR119, 0x16 },
/* no TX continuation */
{ CR122, 0x00 },
/* { CR122, 0xff }, */
{ CR127, 0x03 }, { CR131, 0x08 }, { CR138, 0x28 },
{ CR148, 0x44 }, { CR150, 0x10 }, { CR169, 0xBB },
{ CR170, 0xBB },
};
static const u32 rv[] = {
0x000007, /* REG0(CFG1) */
0x07dd43, /* REG1(IFPLL1) */
0x080959, /* REG2(IFPLL2) */
0x0e6666,
0x116a57, /* REG4 */
0x17dd43, /* REG5 */
0x1819f9, /* REG6 */
0x1e6666,
0x214554,
0x25e7fa,
0x27fffa,
/* The Zydas driver somehow forgets to set this value. It's
* only set for Japan. We are using internal power control
* for now.
*/
0x294128, /* internal power */
/* 0x28252c, */ /* External control TX power */
/* CR31_CCK, CR51_6-36M, CR52_48M, CR53_54M */
0x2c0000,
0x300000,
0x340000, /* REG13(0xD) */
0x381e0f, /* REG14(0xE) */
/* Bogus, RF2959's data sheet doesn't know register 27, which is
* actually referenced here. The commented 0x11 is 17.
*/
0x6c180f, /* REG27(0x11) */
};
r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
if (r)
return r;
return zd_rfwritev_locked(chip, rv, ARRAY_SIZE(rv), RF_RV_BITS);
}
static int rf2959_set_channel(struct zd_rf *rf, u8 channel)
{
int i, r;
const u32 *rv = rf2959_table[channel-1];
struct zd_chip *chip = zd_rf_to_chip(rf);
for (i = 0; i < 2; i++) {
r = zd_rfwrite_locked(chip, rv[i], RF_RV_BITS);
if (r)
return r;
}
return 0;
}
static int rf2959_switch_radio_on(struct zd_rf *rf)
{
static const struct zd_ioreq16 ioreqs[] = {
{ CR10, 0x89 },
{ CR11, 0x00 },
};
struct zd_chip *chip = zd_rf_to_chip(rf);
return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
}
static int rf2959_switch_radio_off(struct zd_rf *rf)
{
static const struct zd_ioreq16 ioreqs[] = {
{ CR10, 0x15 },
{ CR11, 0x81 },
};
struct zd_chip *chip = zd_rf_to_chip(rf);
return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
}
int zd_rf_init_rf2959(struct zd_rf *rf)
{
struct zd_chip *chip = zd_rf_to_chip(rf);
if (zd_chip_is_zd1211b(chip)) {
dev_err(zd_chip_dev(chip),
"RF2959 is currently not supported for ZD1211B"
" devices\n");
return -ENODEV;
}
rf->init_hw = rf2959_init_hw;
rf->set_channel = rf2959_set_channel;
rf->switch_radio_on = rf2959_switch_radio_on;
rf->switch_radio_off = rf2959_switch_radio_off;
return 0;
}
|
