path: root/drivers/net/wireless/b43/phy_n.h

#ifndef B43_NPHY_H_
#define B43_NPHY_H_

#include "phy_common.h"


/* N-PHY registers. */

#define B43_NPHY_BBCFG				B43_PHY_N(0x001) /* BB config */
#define  B43_NPHY_BBCFG_RSTCCA			0x4000 /* Reset CCA */
#define  B43_NPHY_BBCFG_RSTRX			0x8000 /* Reset RX */
#define B43_NPHY_CHANNEL			B43_PHY_N(0x005) /* Channel */
#define B43_NPHY_TXERR				B43_PHY_N(0x007) /* TX error */
#define B43_NPHY_BANDCTL			B43_PHY_N(0x009) /* Band control */
#define  B43_NPHY_BANDCTL_5GHZ			0x0001 /* Use the 5GHz band */
#define B43_NPHY_4WI_ADDR			B43_PHY_N(0x00B) /* Four-wire bus address */
#define B43_NPHY_4WI_DATAHI			B43_PHY_N(0x00C) /* Four-wire bus data high */
#define B43_NPHY_4WI_DATALO			B43_PHY_N(0x00D) /* Four-wire bus data low */
#define B43_NPHY_BIST_STAT0			B43_PHY_N(0x00E) /* Built-in self test status 0 */
#define B43_NPHY_BIST_STAT1			B43_PHY_N(0x00F) /* Built-in self test status 1 */

#define B43_NPHY_C1_DESPWR			B43_PHY_N(0x018) /* Core 1 desired power */
#define B43_NPHY_C1_CCK_DESPWR			B43_PHY_N(0x019) /* Core 1 CCK desired power */
#define B43_NPHY_C1_BCLIPBKOFF			B43_PHY_N(0x01A) /* Core 1 barely clip backoff */
#define B43_NPHY_C1_CCK_BCLIPBKOFF		B43_PHY_N(0x01B) /* Core 1 CCK barely clip backoff */
#define B43_NPHY_C1_CGAINI			B43_PHY_N(0x01C) /* Core 1 compute gain info */
#define  B43_NPHY_C1_CGAINI_GAINBKOFF		0x001F /* Gain backoff */
#define  B43_NPHY_C1_CGAINI_GAINBKOFF_SHIFT	0
#define  B43_NPHY_C1_CGAINI_CLIPGBKOFF		0x03E0 /* Clip gain backoff */
#define  B43_NPHY_C1_CGAINI_CLIPGBKOFF_SHIFT	5
#define  B43_NPHY_C1_CGAINI_GAINSTEP		0x1C00 /* Gain step */
#define  B43_NPHY_C1_CGAINI_GAINSTEP_SHIFT	10
#define  B43_NPHY_C1_CGAINI_CL2DETECT		0x2000 /* Clip 2 detect mask */
#define B43_NPHY_C1_CCK_CGAINI			B43_PHY_N(0x01D) /* Core 1 CCK compute gain info */
#define  B43_NPHY_C1_CCK_CGAINI_GAINBKOFF	0x001F /* Gain backoff */
#define  B43_NPHY_C1_CCK_CGAINI_CLIPGBKOFF	0x01E0 /* CCK barely clip gain backoff */
#define B43_NPHY_C1_MINMAX_GAIN			B43_PHY_N(0x01E) /* Core 1 min/max gain */
#define  B43_NPHY_C1_MINGAIN			0x00FF /* Minimum gain */
#define  B43_NPHY_C1_MINGAIN_SHIFT		0
#define  B43_NPHY_C1_MAXGAIN			0xFF00 /* Maximum gain */
#define  B43_NPHY_C1_MAXGAIN_SHIFT		8
#define B43_NPHY_C1_CCK_MINMAX_GAIN		B43_PHY_N(0x01F) /* Core 1 CCK min/max gain */
#define  B43_NPHY_C1_CCK_MINGAIN		0x00FF /* Minimum gain */
#define  B43_NPHY_C1_CCK_MINGAIN_SHIFT		0
#define  B43_NPHY_C1_CCK_MAXGAIN		0xFF00 /* Maximum gain */
#define  B43_NPHY_C1_CCK_MAXGAIN_SHIFT		8
#define B43_NPHY_C1_INITGAIN			B43_PHY_N(0x020) /* Core 1 initial gain code */
#define  B43_NPHY_C1_INITGAIN_EXTLNA		0x0001 /* External LNA index */
#define  B43_NPHY_C1_INITGAIN_LNA		0x0006 /* LNA index */
#define  B43_NPHY_C1_INITGAIN_LNAIDX_SHIFT	1
#define  B43_NPHY_C1_INITGAIN_HPVGA1		0x0078 /* HPVGA1 index */
#define  B43_NPHY_C1_INITGAIN_HPVGA1_SHIFT	3
#define  B43_NPHY_C1_INITGAIN_HPVGA2		0x0F80 /* HPVGA2 index */
#define  B43_NPHY_C1_INITGAIN_HPVGA2_SHIFT	7
#define  B43_NPHY_C1_INITGAIN_TRRX		0x1000 /* TR RX index */
#define  B43_NPHY_C1_INITGAIN_TRTX		0x2000 /* TR TX index */
#define B43_NPHY_C1_CLIP1_HIGAIN		B43_PHY_N(0x021) /* Core 1 clip1 high gain code */
#define B43_NPHY_C1_CLIP1_MEDGAIN		B43_PHY_N(0x022) /* Core 1 clip1 medium gain code */
#define B43_NPHY_C1_CLIP1_LOGAIN		B43_PHY_N(0x023) /* Core 1 clip1 low gain code */
#define B43_NPHY_C1_CLIP2_GAIN			B43_PHY_N(0x024) /* Core 1 clip2 gain code */
#define B43_NPHY_C1_FILTERGAIN			B43_PHY_N(0x025) /* Core 1 filter gain */
#define B43_NPHY_C1_LPF_QHPF_BW			B43_PHY_N(0x026) /* Core 1 LPF Q HP F bandwidth */
#define B43_NPHY_C1_CLIPWBTHRES			B43_PHY_N(0x027) /* Core 1 clip wideband threshold */
#define  B43_NPHY_C1_CLIPWBTHRES_CLIP2		0x003F /* Clip 2 */
#define  B43_NPHY_C1_CLIPWBTHRES_CLIP2_SHIFT	0
#define  B43_NPHY_C1_CLIPWBTHRES_CLIP1		0x0FC0 /* Clip 1 */
#define  B43_NPHY_C1_CLIPWBTHRES_CLIP1_SHIFT	6
#define B43_NPHY_C1_W1THRES			B43_PHY_N(0x028) /* Core 1 W1 threshold */
#define B43_NPHY_C1_EDTHRES			B43_PHY_N(0x029) /* Core 1 ED threshold */
#define B43_NPHY_C1_SMSIGTHRES			B43_PHY_N(0x02A) /* Core 1 small sig threshold */
#define B43_NPHY_C1_NBCLIPTHRES			B43_PHY_N(0x02B) /* Core 1 NB clip threshold */
#define B43_NPHY_C1_CLIP1THRES			B43_PHY_N(0x02C) /* Core 1 clip1 threshold */
#define B43_NPHY_C1_CLIP2THRES			B43_PHY_N(0x02D) /* Core 1 clip2 threshold */

#define B43_NPHY_C2_DESPWR			B43_PHY_N(0x02E) /* Core 2 desired power */
#define B43_NPHY_C2_CCK_DESPWR			B43_PHY_N(0x02F) /* Core 2 CCK desired power */
#define B43_NPHY_C2_BCLIPBKOFF			B43_PHY_N(0x030) /* Core 2 barely clip backoff */
#define B43_NPHY_C2_CCK_BCLIPBKOFF		B43_PHY_N(0x031) /* Core 2 CCK barely clip backoff */
#define B43_NPHY_C2_CGAINI			B43_PHY_N(0x032) /* Core 2 compute gain info */
#define  B43_NPHY_C2_CGAINI_GAINBKOFF		0x001F /* Gain backoff */
#define  B43_NPHY_C2_CGAINI_GAINBKOFF_SHIFT	0
#define  B43_NPHY_C2_CGAINI_CLIPGBKOFF		0x03E0 /* Clip gain backoff */
#define  B43_NPHY_C2_CGAINI_CLIPGBKOFF_SHIFT	5
#define  B43_NPHY_C2_CGAINI_GAINSTEP		0x1C00 /* Gain step */
#define  B43_NPHY_C2_CGAINI_GAINSTEP_SHIFT	10
#define  B43_NPHY_C2_CGAINI_CL2DETECT		0x2000 /* Clip 2 detect mask */
#define B43_NPHY_C2_CCK_CGAINI			B43_PHY_N(0x033) /* Core 2 CCK compute gain info */
#define  B43_NPHY_C2_CCK_CGAINI_GAINBKOFF	0x001F /* Gain backoff */
#define  B43_NPHY_C2_CCK_CGAINI_CLIPGBKOFF	0x01E0 /* CCK barely clip gain backoff */
#define B43_NPHY_C2_MINMAX_GAIN			B43_PHY_N(0x034) /* Core 2 min/max gain */
#define  B43_NPHY_C2_MINGAIN			0x00FF /* Minimum gain */
#define  B43_NPHY_C2_MINGAIN_SHIFT		0
#define  B43_NPHY_C2_MAXGAIN			0xFF00 /* Maximum gain */
#define  B43_NPHY_C2_MAXGAIN_SHIFT		8
#define B43_NPHY_C2_CCK_MINMAX_GAIN		B43_PHY_N(0x035) /* Core 2 CCK min/max gain */
#define  B43_NPHY_C2_CCK_MINGAIN		0x00FF /* Minimum gain */
#define  B43_NPHY_C2_CCK_MINGAIN_SHIFT		0
#define  B43_NPHY_C2_CCK_MAXGAIN		0xFF00 /* Maximum gain */
#define  B43_NPHY_C2_CCK_MAXGAIN_SHIFT		8
#define B43_NPHY_C2_INITGAIN			B43_PHY_N(0x036) /* Core 2 initial gain code */
#define  B43_NPHY_C2_INITGAIN_EXTLNA		0x0001 /* External LNA index */
#define  B43_NPHY_C2_INITGAIN_LNA		0x0006 /* LNA index */
#define  B43_NPHY_C2_INITGAIN_LNAIDX_SHIFT	1
#define  B43_NPHY_C2_INITGAIN_HPVGA1		0x0078 /* HPVGA1 index */
#define  B43_NPHY_C2_INITGAIN_HPVGA1_SHIFT	3
#define  B43_NPHY_C2_INITGAIN_HPVGA2		0x0F80 /* HPVGA2 index */
#define  B43_NPHY_C2_INITGAIN_HPVGA2_SHIFT	7
#define  B43_NPHY_C2_INITGAIN_TRRX		0x1000 /* TR RX index */
#define  B43_NPHY_C2_INITGAIN_TRTX		0x2000 /* TR TX index */
#define B43_NPHY_C2_CLIP1_HIGAIN		B43_PHY_N(0x037) /* Core 2 clip1 high gain code */
#define B43_NPHY_C2_CLIP1_MEDGAIN		B43_PHY_N(0x038) /* Core 2 clip1 medium gain code */
#define B43_NPHY_C2_CLIP1_LOGAIN		B43_PHY_N(0x039) /* Core 2 clip1 low gain code */
#define B43_NPHY_C2_CLIP2_GAIN			B43_PHY_N(0x03A) /* Core 2 clip2 gain code */
#define B43_NPHY_C2_FILTERGAIN			B43_PHY_N(0x03B) /* Core 2 filter gain */
#define B43_NPHY_C2_LPF_QHPF_BW			B43_PHY_N(0x03C) /* Core 2 LPF Q HP F bandwidth */
#define B43_NPHY_C2_CLIPWBTHRES			B43_PHY_N(0x03D) /* Core 2 clip wideband threshold */
#define  B43_NPHY_C2_CLIPWBTHRES_CLIP2		0x003F /* Clip 2 */
#define  B43_NPHY_C2_CLIPWBTHRES_CLIP2_SHIFT	0
#define  B43_NPHY_C2_CLIPWBTHRES_CLIP1		0x0FC0 /* Clip 1 */
#define  B43_NPHY_C2_CLIPWBTHRES_CLIP1_SHIFT	6
#define B43_NPHY_C2_W1THRES			B43_PHY_N(0x03E) /* Core 2 W1 threshold */
#define B43_NPHY_C2_EDTHRES			B43_PHY_N(0x03F) /* Core 2 ED threshold */
#define B43_NPHY_C2_SMSIGTHRES			B43_PHY_N(0x040) /* Core 2 small sig threshold */
#define B43_NPHY_C2_NBCLIPTHRES			B43_PHY_N(0x041) /* Core 2 NB clip threshold */
#define B43_NPHY_C2_CLIP1THRES			B43_PHY_N(0x042) /* Core 2 clip1 threshold */
#define B43_NPHY_C2_CLIP2THRES			B43_PHY_N(0x043) /* Core 2 clip2 threshold */

#define B43_NPHY_CRS_THRES1			B43_PHY_N(0x044) /* CRS threshold 1 */
#define B43_NPHY_CRS_THRES2			B43_PHY_N(0x045) /* CRS threshold 2 */
#define B43_NPHY_CRS_THRES3			B43_PHY_N(0x046) /* CRS threshold 3 */
#define B43_NPHY_CRSCTL				B43_PHY_N(0x047) /* CRS control */
#define B43_NPHY_DCFADDR			B43_PHY_N(0x048) /* DC filter address */
#define B43_NPHY_RXF20_NUM0			B43_PHY_N(0x049) /* RX filter 20 numerator 0 */
#define B43_NPHY_RXF20_NUM1			B43_PHY_N(0x04A) /* RX filter 20 numerator 1 */
#define B43_NPHY_RXF20_NUM2			B43_PHY_N(0x04B) /* RX filter 20 numerator 2 */
#define B43_NPHY_RXF20_DENOM0			B43_PHY_N(0x04C) /* RX filter 20 denominator 0 */
#define B43_NPHY_RXF20_DENOM1			B43_PHY_N(0x04D) /* RX filter 20 denominator 1 */
#define B43_NPHY_RXF20_NUM10			B43_PHY_N(0x04E) /* RX filter 20 numerator 10 */
#define B43_NPHY_RXF20_NUM11			B43_PHY_N(0x04F) /* RX filter 20 numerator 11 */
#define B43_NPHY_RXF20_NUM12			B43_PHY_N(0x050) /* RX filter 20 numerator 12 */
#define B43_NPHY_RXF20_DENOM10			B43_PHY_N(0x051) /* RX filter 20 denominator 10 */
#define B43_NPHY_RXF20_DENOM11			B43_PHY_N(0x052) /* RX filter 20 denominator 11 */
#define B43_NPHY_RXF40_NUM0			B43_PHY_N(0x053) /* RX filter 40 numerator 0 */
#define B43_NPHY_RXF40_NUM1			B43_PHY_N(0x054) /* RX filter 40 numerator 1 */
#define B43_NPHY_RXF40_NUM2			B43_PHY_N(0x055) /* RX filter 40 numerator 2 */
#define B43_NPHY_RXF40_DENOM0			B43_PHY_N(0x056) /* RX filter 40 denominator 0 */
#define B43_NPHY_RXF40_DENOM1			B43_PHY_N(0x057) /* RX filter 40 denominator 1 */
#define B43_NPHY_RXF40_NUM10			B43_PHY_N(0x058) /* RX filter 40 numerator 10 */
#define B43_NPHY_RXF40_NUM11			B43_PHY_N(0x059) /* RX filter 40 numerator 11 */
#define B43_NPHY_RXF40_NUM12			B43_PHY_N(0x05A) /* RX filter 40 numerator 12 */
#define B43_NPHY_RXF40_DENOM10			B43_PHY_N(0x05B) /* RX filter 40 denominator 10 */
#define B43_NPHY_RXF40_DENOM11			B43_PHY_N(0x05C) /* RX filter 40 denominator 11 */
#define B43_NPHY_PPROC_RSTLEN			B43_PHY_N(0x060) /* Packet processing reset length */
#define B43_NPHY_INITCARR_DLEN			B43_PHY_N(0x061) /* Initial carrier detection length */
#define B43_NPHY_CLIP1CARR_DLEN			B43_PHY_N(0x062) /* Clip1 carrier detection length */
#define B43_NPHY_CLIP2CARR_DLEN			B43_PHY_N(0x063) /* Clip2 carrier detection length */
#define B43_NPHY_INITGAIN_SLEN			B43_PHY_N(0x064) /* Initial gain settle length */
#define B43_NPHY_CLIP1GAIN_SLEN			B43_PHY_N(0x065) /* Clip1 gain settle length */
#define B43_NPHY_CLIP2GAIN_SLEN			B43_PHY_N(0x066) /* Clip2 gain settle length */
#define B43_NPHY_PACKGAIN_SLEN			B43_PHY_N(0x067) /* Packet gain settle length */
#define B43_NPHY_CARRSRC_TLEN			B43_PHY_N(0x068) /* Carrier search timeout length */
#define B43_NPHY_TISRC_TLEN			B43_PHY_N(0x069) /* Timing search timeout length */
#define B43_NPHY_ENDROP_TLEN			B43_PHY_N(0x06A) /* Energy drop timeout length */
#define B43_NPHY_CLIP1_NBDWELL_LEN		B43_PHY_N(0x06B) /* Clip1 NB dwell length */
#define B43_NPHY_CLIP2_NBDWELL_LEN		B43_PHY_N(0x06C) /* Clip2 NB dwell length */
#define B43_NPHY_W1CLIP1_DWELL_LEN		B43_PHY_N(0x06D) /* W1 clip1 dwell length */
#define B43_NPHY_W1CLIP2_DWELL_LEN		B43_PHY_N(0x06E) /* W1 clip2 dwell length */
#define B43_NPHY_W2CLIP1_DWELL_LEN		B43_PHY_N(0x06F) /* W2 clip1 dwell length */
#define B43_NPHY_PLOAD_CSENSE_EXTLEN		B43_PHY_N(0x070) /* Payload carrier sense extension length */
#define B43_NPHY_EDROP_CSENSE_EXTLEN		B43_PHY_N(0x071) /* Energy drop carrier sense extension length */
#define B43_NPHY_TABLE_ADDR			B43_PHY_N(0x072) /* Table address */
#define B43_NPHY_TABLE_DATALO			B43_PHY_N(0x073) /* Table data low */
#define B43_NPHY_TABLE_DATAHI			B43_PHY_N(0x074) /* Table data high */
#define B43_NPHY_WWISE_LENIDX			B43_PHY_N(0x075) /* WWiSE length index */
#define B43_NPHY_TGNSYNC_LENIDX			B43_PHY_N(0x076) /* TGNsync length index */
#define B43_NPHY_TXMACIF_HOLDOFF		B43_PHY_N(0x077) /* TX MAC IF Hold off */
#define B43_NPHY_RFCTL_CMD			B43_PHY_N(0x078) /* RF control (command) */
#define  B43_NPHY_RFCTL_CMD_START		0x0001 /* Start sequence */
#define  B43_NPHY_RFCTL_CMD_RXTX		0x0002 /* RX/TX */
#define  B43_NPHY_RFCTL_CMD_CORESEL		0x0038 /* Core select */
#define  B43_NPHY_RFCTL_CMD_CORESEL_SHIFT	3
#define  B43_NPHY_RFCTL_CMD_PORFORCE		0x0040 /* POR force */
#define  B43_NPHY_RFCTL_CMD_OEPORFORCE		0x0080 /* OE POR force */
#define  B43_NPHY_RFCTL_CMD_RXEN		0x0100 /* RX enable */
#define  B43_NPHY_RFCTL_CMD_TXEN		0x0200 /* TX enable */
#define  B43_NPHY_RFCTL_CMD_CHIP0PU		0x0400 /* Chip0 PU */
#define  B43_NPHY_RFCTL_CMD_EN			0x0800 /* Radio enabled */
#define  B43_NPHY_RFCTL_CMD_SEQENCORE		0xF000 /* Seq en core */
#define  B43_NPHY_RFCTL_CMD_SEQENCORE_SHIFT	12
#define B43_NPHY_RFCTL_RSSIO1			B43_PHY_N(0x07A) /* RF control (RSSI others 1) */
#define  B43_NPHY_RFCTL_RSSIO1_RXPD		0x0001 /* RX PD */
#define  B43_NPHY_RFCTL_RSSIO1_TXPD		0x0002 /* TX PD */
#define  B43_NPHY_RFCTL_RSSIO1_PAPD		0x0004 /* PA PD */
#define  B43_NPHY_RFCTL_RSSIO1_RSSICTL		0x0030 /* RSSI control */
#define  B43_NPHY_RFCTL_RSSIO1_LPFBW		0x00C0 /* LPF bandwidth */
#define  B43_NPHY_RFCTL_RSSIO1_HPFBWHI		0x0100 /* HPF bandwidth high */
#define  B43_NPHY_RFCTL_RSSIO1_HIQDISCO		0x0200 /* HIQ dis core */
#define B43_NPHY_RFCTL_RXG1			B43_PHY_N(0x07B) /* RF control (RX gain 1) */
#define B43_NPHY_RFCTL_TXG1			B43_PHY_N(0x07C) /* RF control (TX gain 1) */
#define B43_NPHY_RFCTL_RSSIO2			B43_PHY_N(0x07D) /* RF control (RSSI others 2) */
#define  B43_NPHY_RFCTL_RSSIO2_RXPD		0x0001 /* RX PD */
#define  B43_NPHY_RFCTL_RSSIO2_TXPD		0x0002 /* TX PD */
#define  B43_NPHY_RFCTL_RSSIO2_PAPD		0x0004 /* PA PD */
#define  B43_NPHY_RFCTL_RSSIO2_RSSICTL		0x0030 /* RSSI control */
#define  B43_NPHY_RFCTL_RSSIO2_LPFBW		0x00C0 /* LPF bandwidth */
#define  B43_NPHY_RFCTL_RSSIO2_HPFBWHI		0x0100 /* HPF bandwidth high */
#define  B43_NPHY_RFCTL_RSSIO2_HIQDISCO		0x0200 /* HIQ dis core */
#define B43_NPHY_RFCTL_RXG2			B43_PHY_N(0x07E) /* RF control (RX gain 2) */
#define B43_NPHY_RFCTL_TXG2			B43_PHY_N(0x07F) /* RF control (TX gain 2) */
#define B43_NPHY_RFCTL_RSSIO3			B43_PHY_N(0x080) /* RF control (RSSI others 3) */
#define  B43_NPHY_RFCTL_RSSIO3_RXPD		0x0001 /* RX PD */
#define  B43_NPHY_RFCTL_RSSIO3_TXPD		0x0002 /* TX PD */
#define  B43_NPHY_RFCTL_RSSIO3_PAPD		0x0004 /* PA PD */
#define  B43_NPHY_RFCTL_RSSIO3_RSSICTL		0x0030 /* RSSI control */
#define  B43_NPHY_RFCTL_RSSIO3_LPFBW		0x00C0 /* LPF bandwidth */
#define  B43_NPHY_RFCTL_RSSIO3_HPFBWHI		0x0100 /* HPF bandwidth high */
#define  B43_NPHY_RFCTL_RSSIO3_HIQDISCO		0x0200 /* HIQ dis core */
#define B43_NPHY_RFCTL_RXG3			B43_PHY_N(0x081) /* RF control (RX gain 3) */
#define B43_NPHY_RFCTL_TXG3			B43_PHY_N(0x082) /* RF control (TX gain 3) */
#define B43_NPHY_RFCTL_RSSIO4			B43_PHY_N(0x083) /* RF control (RSSI others 4) */
#define  B43_NPHY_RFCTL_RSSIO4_RXPD		0x0001 /* RX PD */
#define  B43_NPHY_RFCTL_RSSIO4_TXPD		0x0002 /* TX PD */
#define  B43_NPHY_RFCTL_RSSIO4_PAPD		0x0004 /* PA PD */
#define  B43_NPHY_RFCTL_RSSIO4_RSSICTL		0x0030 /* RSSI control */
#define  B43_NPHY_RFCTL_RSSIO4_LPFBW		0x00C0 /* LPF bandwidth */
#define  B43_NPHY_RFCTL_RSSIO4_HPFBWHI		0x0100 /* HPF bandwidth high */
#define  B43_NPHY_RFCTL_RSSIO4_HIQDISCO		0x0200 /* HIQ dis core */
#define B43_NPHY_RFCTL_RXG4			B43_PHY_N(0x084) /* RF control (RX gain 4) */
#define B43_NPHY_RFCTL_TXG4			B43_PHY_N(0x085) /* RF control (TX gain 4) */
#define B43_NPHY_C1_TXIQ_COMP_OFF		B43_PHY_N(0x087) /* Core 1 TX I/Q comp offset */
#define B43_NPHY_C2_TXIQ_COMP_OFF		B43_PHY_N(0x088) /* Core 2 TX I/Q comp offset */
#define B43_NPHY_C1_TXCTL			B43_PHY_N(0x08B) /* Core 1 TX control */
#define B43_NPHY_C2_TXCTL			B43_PHY_N(0x08C) /* Core 2 TX control */
#define B43_NPHY_AFECTL_OVER1			B43_PHY_N(0x08F) /* AFE control override 1 */
#define B43_NPHY_SCRAM_SIGCTL			B43_PHY_N(0x090) /* Scram signal control */
#define  B43_NPHY_SCRAM_SIGCTL_INITST		0x007F /* Initial state value */
#define  B43_NPHY_SCRAM_SIGCTL_INITST_SHIFT	0
#define  B43_NPHY_SCRAM_SIGCTL_SCM		0x0080 /* Scram control mode */
#define  B43_NPHY_SCRAM_SIGCTL_SICE		0x0100 /* Scram index control enable */
#define  B43_NPHY_SCRAM_SIGCTL_START		0xFE00 /* Scram start bit */
#define  B43_NPHY_SCRAM_SIGCTL_START_SHIFT	9
#define B43_NPHY_RFCTL_INTC1			B43_PHY_N(0x091) /* RF control (intc 1) */
#define B43_NPHY_RFCTL_INTC2			B43_PHY_N(0x092) /* RF control (intc 2) */
#define B43_NPHY_RFCTL_INTC3			B43_PHY_N(0x093) /* RF control (intc 3) */
#define B43_NPHY_RFCTL_INTC4			B43_PHY_N(0x094) /* RF control (intc 4) */
#define B43_NPHY_NRDTO_WWISE			B43_PHY_N(0x095) /* # datatones WWiSE */
#define B43_NPHY_NRDTO_TGNSYNC			B43_PHY_N(0x096) /* # datatones TGNsync */
#define B43_NPHY_SIGFMOD_WWISE			B43_PHY_N(0x097) /* Signal field mod WWiSE */
#define B43_NPHY_LEG_SIGFMOD_11N		B43_PHY_N(0x098) /* Legacy signal field mod 11n */
#define B43_NPHY_HT_SIGFMOD_11N			B43_PHY_N(0x099) /* HT signal field mod 11n */
#define B43_NPHY_C1_RXIQ_COMPA0			B43_PHY_N(0x09A) /* Core 1 RX I/Q comp A0 */
#define B43_NPHY_C1_RXIQ_COMPB0			B43_PHY_N(0x09B) /* Core 1 RX I/Q comp B0 */
#define B43_NPHY_C2_RXIQ_COMPA1			B43_PHY_N(0x09C) /* Core 2 RX I/Q comp A1 */
#define B43_NPHY_C2_RXIQ_COMPB1			B43_PHY_N(0x09D) /* Core 2 RX I/Q comp B1 */
#define B43_NPHY_RXCTL				B43_PHY_N(0x0A0) /* RX control */
#define  B43_NPHY_RXCTL_BSELU20			0x0010 /* Band select upper 20 */
#define  B43_NPHY_RXCTL_RIFSEN			0x0080 /* RIFS enable */
#define B43_NPHY_RFSEQMODE			B43_PHY_N(0x0A1) /* RF seq mode */
#define  B43_NPHY_RFSEQMODE_CAOVER		0x0001 /* Core active override */
#define  B43_NPHY_RFSEQMODE_TROVER		0x0002 /* Trigger override */
#define B43_NPHY_RFSEQCA			B43_PHY_N(0x0A2) /* RF seq core act