path: root/drivers/net/ni65.c

/*
 * ni6510 (am7990 'lance' chip) driver for Linux-net-3
 * BETAcode v0.71 (96/09/29) for 2.0.0 (or later)
 * copyrights (c) 1994,1995,1996 by M.Hipp
 *
 * This driver can handle the old ni6510 board and the newer ni6510
 * EtherBlaster. (probably it also works with every full NE2100
 * compatible card)
 *
 * To compile as module, type:
 *     gcc -O2 -fomit-frame-pointer -m486 -D__KERNEL__ -DMODULE -c ni65.c
 * driver probes: io: 0x360,0x300,0x320,0x340 / dma: 3,5,6,7
 *
 * This is an extension to the Linux operating system, and is covered by the
 * same GNU General Public License that covers the Linux-kernel.
 *
 * comments/bugs/suggestions can be sent to:
 *   Michael Hipp
 *   email: hippm@informatik.uni-tuebingen.de
 *
 * sources:
 *   some things are from the 'ni6510-packet-driver for dos by Russ Nelson'
 *   and from the original drivers by D.Becker
 *
 * known problems:
 *   - on some PCI boards (including my own) the card/board/ISA-bridge has
 *     problems with bus master DMA. This results in lotsa overruns.
 *     It may help to '#define RCV_PARANOIA_CHECK' or try to #undef
 *     the XMT and RCV_VIA_SKB option .. this reduces driver performance.
 *     Or just play with your BIOS options to optimize ISA-DMA access.
 *     Maybe you also wanna play with the LOW_PERFORAMCE and MID_PERFORMANCE
 *     defines -> please report me your experience then
 *   - Harald reported for ASUS SP3G mainboards, that you should use
 *     the 'optimal settings' from the user's manual on page 3-12!
 *
 * credits:
 *   thanx to Jason Sullivan for sending me a ni6510 card!
 *   lot of debug runs with ASUS SP3G Boards (Intel Saturn) by Harald Koenig
 *
 * simple performance test: (486DX-33/Ni6510-EB receives from 486DX4-100/Ni6510-EB)
 *    average: FTP -> 8384421 bytes received in 8.5 seconds
 *           (no RCV_VIA_SKB,no XMT_VIA_SKB,PARANOIA_CHECK,4 XMIT BUFS, 8 RCV_BUFFS)
 *    peak: FTP -> 8384421 bytes received in 7.5 seconds
 *           (RCV_VIA_SKB,XMT_VIA_SKB,no PARANOIA_CHECK,1(!) XMIT BUF, 16 RCV BUFFS)
 */

/*
 * 99.Jun.8: added support for /proc/net/dev byte count for xosview (HK)
 * 96.Sept.29: virt_to_bus stuff added for new memory modell
 * 96.April.29: Added Harald Koenig's Patches (MH)
 * 96.April.13: enhanced error handling .. more tests (MH)
 * 96.April.5/6: a lot of performance tests. Got it stable now (hopefully) (MH)
 * 96.April.1: (no joke ;) .. added EtherBlaster and Module support (MH)
 * 96.Feb.19: fixed a few bugs .. cleanups .. tested for 1.3.66 (MH)
 *            hopefully no more 16MB limit
 *
 * 95.Nov.18: multicast tweaked (AC).
 *
 * 94.Aug.22: changes in xmit_intr (ack more than one xmitted-packet), ni65_send_packet (p->lock) (MH)
 *
 * 94.July.16: fixed bugs in recv_skb and skb-alloc stuff  (MH)
 */

#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/module.h>
#include <linux/bitops.h>

#include <asm/io.h>
#include <asm/dma.h>

#include "ni65.h"

/*
 * the current setting allows an acceptable performance
 * for 'RCV_PARANOIA_CHECK' read the 'known problems' part in
 * the header of this file
 * 'invert' the defines for max. performance. This may cause DMA problems
 * on some boards (e.g on my ASUS SP3G)
 */
#undef XMT_VIA_SKB
#undef RCV_VIA_SKB
#define RCV_PARANOIA_CHECK

#define MID_PERFORMANCE

#if   defined( LOW_PERFORMANCE )
 static int isa0=7,isa1=7,csr80=0x0c10;
#elif defined( MID_PERFORMANCE )
 static int isa0=5,isa1=5,csr80=0x2810;
#else	/* high performance */
 static int isa0=4,isa1=4,csr80=0x0017;
#endif

/*
 * a few card/vendor specific defines
 */
#define NI65_ID0    0x00
#define NI65_ID1    0x55
#define NI65_EB_ID0 0x52
#define NI65_EB_ID1 0x44
#define NE2100_ID0  0x57
#define NE2100_ID1  0x57

#define PORT p->cmdr_addr

/*
 * buffer configuration
 */
#if 1
#define RMDNUM 16
#define RMDNUMMASK 0x80000000
#else
#define RMDNUM 8
#define RMDNUMMASK 0x60000000 /* log2(RMDNUM)<<29 */
#endif

#if 0
#define TMDNUM 1
#define TMDNUMMASK 0x00000000
#else
#define TMDNUM 4
#define TMDNUMMASK 0x40000000 /* log2(TMDNUM)<<29 */
#endif

/* slightly oversized */
#define R_BUF_SIZE 1544
#define T_BUF_SIZE 1544

/*
 * lance register defines
 */
#define L_DATAREG 0x00
#define L_ADDRREG 0x02
#define L_RESET   0x04
#define L_CONFIG  0x05
#define L_BUSIF   0x06

/*
 * to access the lance/am7990-regs, you have to write
 * reg-number into L_ADDRREG, then you can access it using L_DATAREG
 */
#define CSR0  0x00
#define CSR1  0x01
#define CSR2  0x02
#define CSR3  0x03

#define INIT_RING_BEFORE_START	0x1
#define FULL_RESET_ON_ERROR	0x2

#if 0
#define writereg(val,reg) {outw(reg,PORT+L_ADDRREG);inw(PORT+L_ADDRREG); \
                           outw(val,PORT+L_DATAREG);inw(PORT+L_DATAREG);}
#define readreg(reg) (outw(reg,PORT+L_ADDRREG),inw(PORT+L_ADDRREG),\
                       inw(PORT+L_DATAREG))
#if 0
#define writedatareg(val) {outw(val,PORT+L_DATAREG);inw(PORT+L_DATAREG);}
#else
#define writedatareg(val) {  writereg(val,CSR0); }
#endif
#else
#define writereg(val,reg) {outw(reg,PORT+L_ADDRREG);outw(val,PORT+L_DATAREG);}
#define readreg(reg) (outw(reg,PORT+L_ADDRREG),inw(PORT+L_DATAREG))
#define writedatareg(val) { writereg(val,CSR0); }
#endif

static unsigned char ni_vendor[] = { 0x02,0x07,0x01 };

static struct card {
	unsigned char id0,id1;
	short id_offset;
	short total_size;
	short cmd_offset;
	short addr_offset;
	unsigned char *vendor_id;
	char *cardname;
	un